[Elecraft] [K3] Line Out level

[iain macdonnell - N6ML]

I usually run the line out level around 20. If you need it to be less
than 1, you must be feeding a mic level input. Sounds like you need to
add an attenuator, if you can't use a line-level input.

73,

    ~iain / N6ML


On Tue, Jan 8, 2013 at 10:50 AM, Jim Sheldon <w0eb at cox.net> wrote:
> Is there any chance of getting the K3's line out level lowered?  Even when set to it's lowest level of 1, it puts out a bit too much audio for my TASCAM US-100 external sound card.  The TASCAM has an external input level control and even with it all the way down, the K3 puts out too much audio for all the sound card apps I use (Digipan, MMTTY, FLDIGI, etc).
>
> If set to zero, then there's no output at all.  The output level for #1 in the menu should be about half or maybe even a quarter of what it is now. That would also allow the various Windows mixers a lot better control over the soundcard input level too.
>
> Jim - W0EB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html