[Elecraft] KXBC3 charging

[Rich Heineck]

The recommended 13.8V minimum is for the external supply, and does take 
into account the diode drop.

73,
Rich  AC7MA


On 01/27/2013 03:42 PM, Ron D'Eau Claire wrote:
> Mine charges just fine from a 13.8 VDC supply.
>
> 73 Ron AC7AC
>
> -----Original Message-----
> Hi,
> I believe your PS reading is too low. The PS reading on the KX3 should be at
> least 13.8 volts. There is a polarity diode so your ext power supply should
> be 14+ volts.
> At least this what my KX3 needs to charge.
> 73
> Jim H  K7SSS
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>