[Elecraft] K3 S-Meter

[Fred Jensen]

Running 4.58 and mine does the same.  I set the service monitor down to 
S-9, and then set the P3 to -73 dBm, but finally decided I didn't like 
peak-hold, and put it back.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6 Oct 2013
- www.cqp.org

On 1/15/2013 12:45 PM, Pierfrancesco Caci wrote:
>>>>>> "DL5OCD" == DL5OCD  <metamorph at t-online.de> writes:
>
>
>      DL5OCD> Hello together,
>      DL5OCD> i observed when i activate the peak-hold function of the
>      DL5OCD> S-Meter that one
>      DL5OCD> "bar" is added to the signal (the hold dot). So the meter
>      DL5OCD> shows abt 5db too
>      DL5OCD> much...anyone observed this issue ?
>      DL5OCD> I use 4.60 FW, SMTR MD set to abs.
>
>
> Yes, noticed the same a couple days ago when running the s-meter
> calibration in absolute mode. Using 4.61 here.