[Elecraft] (ELECRAFT) K3 RECEIVER

[Richard Fjeld]

Speaking of this, I bought some jumpers recently, and I noticed the PL259 plugs slipped into the SO239 socket too freely, as if no contact.  

Rather then bend the pins on the socket, I applied a little solder to the plug's center conductor and then filed the solder down until it slid into the socket with some friction.  I have no doubts now.


  ----- Original Message ----- 
  From: zumbruns 
  To: Elecraft Reflector 
  Sent: Friday, January 25, 2013 1:49 PM
  Subject: [Elecraft] (ELECRAFT) K3 RECEIVER



  SOUNDS LIKE BAD COAX CONNECTOR TO ME. IVE HAD THE SAME PROBLEM IN PAST AND NEW COAX AND CONNECTORS SOLVED THE PROBLEM FOR ME. 73 STEVE
  ______________________________________________________________
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html