[Elecraft] (K3) K3 WSPR settings that work for me

[paul ecker]

Dennis- great summary. I wish I had seen earlier. My trouble with WSPR not changing freqs was due to have an incorrect Handshake setting ( hardware vs. none). My K3/Signalink USB/ all digital programs are now functioning in all aspects.

73 Paul
kc2nyu

Message: 7
Date: Wed, 16 Jan 2013 15:22:55 -0800
From: Dennis Moore <dennis at mail4life.net>
To: Elecraft Reflector <elecraft at mailman.qth.net>
Subject: [Elecraft] K3 WSPR settings that work for me
Message-ID: <50F7364F.5080204 at mail4life.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

There are various discussions both on and off this list about how to set 
up the K3 with the Signalink USB when using WSPR, but I ran into a 
problem with the K3 staying in XMIT after sending was complete. 
Solutions were available online, just none that solved my issue. These 
settings got my K3 working on WSPR. The setup listed for the K3 and 
Signalink are also working with RMS Express and DM-780.