[Elecraft] K3 Remote VFO tuning control

[Dr. William J. Schmidt, II]

K9SD already makes this device...


Dr. William J. Schmidt - K9HZ / J68HZ/ 8P6HK/ ZF2HZ

Owner - Operator
Big Signal Ranch
Staunton, Illinois

email:  bill at wjschmidt.com


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill Clarke
Sent: Saturday, January 05, 2013 8:54 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Remote VFO tuning control

I would like to see a remote tuning device (VFO control only) that can be
moved around the desk etc. It needs to be simple - such as an extra VFO
encoder mounted in a box and on a wire in parallel to the existing VFO-B
encoder. Elegant by simplicity - it could plug into a jack installed on the
bottom edge of the front panel (or simply a 5-conductor line brought out
from VFO-B). I may be wrong, but I sure don't look at this as rocket science
- it is all mechanical and a little soldering. It would only be active when
VFO-B is selected. Any comments?

Thanks,

Bill W2BLC



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html