[Elecraft] K2 - Turns on, locked in transmit

[Don Wilhelm]

Ed,

Since it powers on in transmit, first be certain it is connected to a 
dummy load so you don't pop the finals.

First thing to check is anything connected to the Key jack or the Mic 
jack - if there is, remove them and see if the problem goes away..

If it does not, you will have to do some measurements inside to 
determine the source of the problem.  Send me an email when you are able 
to do some troubleshooting.

73,
Don W3FPR

On 1/6/2013 12:04 PM, ed-ad7gr wrote:
> If this has been answered before please direct me to the thread.   Thanks.
>
> I just relocated my op desk to another room, labeled all cables and
> reconnected all accordingly.   When I switch on my K2 (s/n 06050) it comes
> up in transmit... constantly.   There is a loud tone from the speaker, the
> display lights up with, first, Elecraft, and then the frequency is
> displayed.   No controls function at all.
>
> Until I am able to reorganize from this move I am not able to do any major
> troubleshooting.   Hopefully this issue has a relatively simple solution and
> the solution is obvious to someone on the list.   Since all controls are
> seemingly locked I am not able to copy down any settings.
>