[Elecraft] KX3 - Factory Testing identical to Kit Testing?
Chris Schrecengost
chris.schrecengost at gmail.com
Fri Jan 4 22:03:49 EST 2013
It absolutely does. It makes me wish I had gone with a built rather than a
kit.
Chris
AB3QV
On Fri, Jan 4, 2013 at 6:43 PM, Ray Sills <raysills3 at verizon.net> wrote:
> That brings a lot of value added to the factor-built version. IMO, worth
> the price, especially considering the number of hours spent in checking the
> rig.
>
> 73 de Ray
> K2ULR
> KX3 #211 (Kit.. with no regrets)
>
>
>
> On Jan 4, 2013, at 6:14 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
>
> Hi Richard,
>>
>> While we do test and align the PCB boards identically on the kit and
>> factory assembled KX3s, we do further testing on the assembled units to
>> insure that we built them perfectly.
>>
>> Assembled KX3s are given an preliminary TX and RX test after assembly,
>> followed by a multi-hour burn in rack test. There under computer control we
>> stress test the KX3 by transmitting key down on each band while checking
>> temperature, current and power out and also check tuning of the ATU on each
>> band. This occurs in a repetitive fashion - cycling through the bands - for
>> a minimum of 8 hours. After passing burn-in, the assembled KX3 goes to
>> final test on a technicians lab bench, where we test all RX and TX
>> parameters on all bands, including RX sensitivity, TX power, Current drain
>> in TX, TX IMD etc. We also do tests on the SSB audio, CW keying, receive
>> audio and a number of other parameters. Each added option is also tested in
>> the KX3.
>>
>> In general we see few failures in burn-in or final test, due to our
>> extensive testing of the PC boards before assembly (and before packaging
>> them into kits).
>>
>> 73,
>>
>> Eric
>> ---
>> www.elecraft.com
>>
>
> ______________________________**______________________________**__
> Elecraft mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft at mailman.qth.**net <Elecraft at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list