[Elecraft] Post to the group

[Fred Smith]

I would say that is a common sense approach to the issue.

Fred/N0AZZ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Sunday, January 27, 2013 8:09 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Post to the group

Bill,

While I agree with you in general, there are occasions when the nitty gritty
details are not of interest to the group.
For instance, if I begin to help someone with a problem that gets into
detailed measurements, that no longer is of interest to everyone, so I take
it off-list.  I leave it up to the discretion of the person with the problem
to post whatever is the final resolution to the reflector.  
That sometimes happens, but sometimes does not.

So, as long as I feel it is of general interest, I will post to the group,
but if it is an individual question, I will go off-list.

73,
Don W3FPR
On 1/27/2013 8:52 PM, Bill Clarke wrote:
> Replies to posts should be to the group - NOT sent as private emails. 
> Private emails are not seen by the group, hence no one in the group 
> can learn anything or hear what is being said on a particular subject.
>
> Bill W2BLC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html