[Elecraft] K3 CWT Function with firmware MCU 4.60 / DSP 2.80

[Brian Alsop]

CWT is not working as well in 4.61 either.  It doesn't hit zero beat 
within 4 Hz.  It used to be spot on.  This observation was made and 
posted here when 4.61 came out.

73 de Brian/K3KO


On 1/16/2013 18:36, Chad Wasinger wrote:
> Has anyone experienced any issues with not decoding a good cw signal via the CWT function on firmware version 4.60/2.80? I've been running the older 4.48 which is the best firmware I've seen for the CWT function to work properly. I did note that the 4.60 firmware had some fixes in it for the CWT function, yet I'm not having any luck making it work right. I've tried all the recommend settings as well. When I revert back to 4.48, all is good. Also, my KX3 is spot on with the CW decoding. I thought possibly my AGC menu's might need adjusted but looks like this new release has it's own independent AGC algorithms.
> Suggestions?
> Thanks,ChadN0YK
>
>   		 	   		
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2221 / Virus Database: 2638/5537 - Release Date: 01/16/13
>
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2638/5537 - Release Date: 01/16/13