[Elecraft] COM port not working

[Don Wilhelm]

I can second that.  The Edgeport series are referred to as "converters" 
rather than "adapters", and I believe there is a real difference.  The 
Edgeport converters have been used in commercial applications while most 
adapters are destined for the consumer market.

My Edgeport 4 is one of the few adapters that will work reliably at the 
slower data rate required by the K2.  Most others do not like to run at 
that slow speed, although I have just tried a Keyspan adapter with a K2 
that worked just fine.

73,
Don W3FPR

On 1/19/2013 7:34 PM, hawley, charles j jr wrote:
> The Edgeport 4 port serial to usb converters have been flawless. They use one usb port and i can connect the whole K line into one of them.
>