[Elecraft] My in-progress K1 is ALIVE!!!

[Scotty Long]

Very cool Paul congratulations on your success!!! I hope to start my K1 very soon it's in the mail...
 
Scotty NU0S Nebraska
 

> Date: Tue, 29 Jan 2013 10:22:49 -0500
> From: rochep at comcast.net
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] My in-progress K1 is ALIVE!!!
> 
> Nobody at my house cares about radio stuff, so I have to share this with
> somebody!!
> 
> I am putting together my K1 and have gotten to the point where I install L1
> to perform the "VFO Range Test". Of course I just HAD to plug in an antenna
> to see if this thing can hear, so I push the ON/OFF button and ... ... ...
> 
> IT'S ALIVE!!!! How exciting, I just listened to 40 CW all night, did VFO
> range tests, and went to bed. I peaked all the trimmers "by ear" by
> transmitting 2 watts from my big rig (into a dummy load); there must be a
> more scientific way to do this. But so far so good. At 5 watts I think what
> will keep me back is NOT that last dB I lose from bad tweeking of the caps!
> 
> My only snags:
> 
> 1. I did not have a DMM and assumed my analog Radio Shack meter would do.
> The RatShack meter gave me crazy readings, went to Amazon and got an Equus
> 3320 Autorange DMM for $21 and BINGO, all readings were right on.
> 
> 2. I could not get VFO frequency up to 3.090 by simple spreading of turns in
> L1, I had to remove L1 and remove a turn. BUT I had already flush-cut the
> leads when I put it in. It was a BITCH to get L1 installed again and that
> one short lead in the hole deep enough for soldering. Since removing L1 is a
> distinct possibility for future builders, maybe a note to NOT flush-cut the
> leads until you are SURE L1 is right.
> 
> Otherwise, HAPPY HAPPY JOY JOY.
> 
> Paul K3STX
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html