[Elecraft] KX3 Battery Holder and Batter Removal

[Rich]

A short piece of ribbon under/around one battery makes it easy to remove 
the first battery in the set.

Rich
NU6T

On 1/19/2013 11:12 AM, hawley, charles j jr wrote:
> I use a not very sharp small flat bladed screwdriver and lightly pry on the plus side of the battery against the battery holder side (lever it up). The plus side comes up fairly easily and I can remove the battery.
>
> Chuck, KE9UW
> Lionel Trains, TCA, LCCA, LRRC
> aka Jack, BMW Motorcycles BMWMOA #224
>
> ________________________________________
> From: elecraft-bounces at mailman.qth.net [elecraft-bounces at mailman.qth.net] on behalf of Phil Hystad [phystad at mac.com]
> Sent: Saturday, January 19, 2013 12:42 PM
> To: elecraft at mailman.qth.net List
> Subject: [Elecraft] KX3 Battery Holder and Batter Removal
>
> So, I saw that KX3 Kit Builder Alert posted yesterday.  Even though I was confident that I did not use the wrong length of screws on the battery holder I decided to check anyway.
>
> I had a real heck of a time removing the batteries.  I mean, really!  I am worried that if I go through this again I could easily damage the insulated casing of the battery.
>
> Does anyone have a suggestion to making this task easier.  Do you use a tool that will not damage, if so, what is it?
>
> Thanks,
>
> 73, phil, K7PEH
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>