[Elecraft] K3 Remote VFO tuning control

[Gary K9GS]

Bill...this has been suggested many times before.  Don't hold your 
breath......


On 1/5/2013 8:53 PM, Bill Clarke wrote:
> I would like to see a remote tuning device (VFO control only) that can 
> be moved around the desk etc. It needs to be simple - such as an extra 
> VFO encoder mounted in a box and on a wire in parallel to the existing 
> VFO-B encoder. Elegant by simplicity - it could plug into a jack 
> installed on the bottom edge of the front panel (or simply a 
> 5-conductor line brought out from VFO-B). I may be wrong, but I sure 
> don't look at this as rocket science - it is all mechanical and a 
> little soldering. It would only be active when VFO-B is selected. Any 
> comments?
>
> Thanks,
>
> Bill W2BLC
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 


73,

Gary K9GS

Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032   http://www.cwops.org

************************************************