[Elecraft] K3 occasionally stuck in transmit with N1MM

[Joe Subich, W4TV]

> When contesting CW, I set N1MM for software PTT.

*DON'T USE SOFTWARE PTT* with any microHAM Interface.  ALWAYS use
hardware PTT from a keyer, the logging program or VOX (semi break-in)
from the rig.   There are several models of transceiver known to get
stuck in transmit when mixing software (command) PTT and hardware
PTT.

73,

    ... Joe, W4TV


On 1/27/2013 9:19 PM, Ignacy wrote:
> When contesting CW, I set N1MM for software PTT. This works very well but
> about every hr the radio is stuck in transmit. Hitting the button with
> BAND/VOX unstucks. Any idea what it may be?
> K3 is controlled by Microham StationMaster and CW is by CwKeyer. Would
> prefer keying directly but then StatioMaster does not work.
> Ignacy, NO9E
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-occasionally-stuck-in-transmit-with-N1MM-tp7569218.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>