April 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Apr 1 07:47:28 EDT 2011
Ending: Sat Apr 30 22:23:03 EDT 2011
Messages: 1819

• [Elecraft] K3EXREF and Trimble Thunderbolts   James Sarte (K2QI)
• [Elecraft] K3EXREF and Trimble Thunderbolts   James Sarte (K2QI)
• [Elecraft] re KPA 500 and ATU Great design   Bill (K9YEQ)
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Bill (K9YEQ)
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Bill (K9YEQ)
• [Elecraft] XG3 shipping status - Any received?   Bill (K9YEQ)
• [Elecraft] P3 Manual Updates   Bill (K9YEQ)
• [Elecraft] factory built k3/100/F   Bill (K9YEQ)
• [Elecraft] Another thought for the XG3 Utility   Bill (K9YEQ)
• [Elecraft] Odd Question [Elecraft history]   Bill (K9YEQ)
• [Elecraft] [K2] Kit Building Time ?   Bill (K9YEQ)
• [Elecraft] Odd Question [Elecraft history]   Bill (K9YEQ)
• [Elecraft] XG2, 3 Band 1-uV / 50-uV Receiver Test Oscillator (80, 40 & 20M) - SOLD   Bill (K9YEQ)
• [Elecraft] New XG3 f/w includes CW beacon mode   Bill (K9YEQ)
• [Elecraft] OT: Hi-Fi audio amplifier kit   Sverre Holm (LA3ZA)
• [Elecraft] OT: Hi-Fi audio amplifier kit   Sverre Holm (LA3ZA)
• [Elecraft] key dot weight   Poul Erik Karlshøj (PKA)
• [Elecraft] key dot weight   Poul Erik Karlshøj (PKA)
• [Elecraft] key dot weight   Poul Erik Karlshøj (PKA)
• [Elecraft] key dot weight   Poul Erik Karlshøj (PKA)
• [Elecraft] What Is Default for CONFIG: FW REVS   -.-. --.-N3TU -.-. --.-
• [Elecraft] ACHTUNG: Mail "Franz Nieberding" nicht öffnen   Wolfgang Schwarz -DK9VZ-
• [Elecraft] cw decoder on writelog   rdonner at dslextreme.com
• [Elecraft] Cw decoder   rdonner at dslextreme.com
• [Elecraft] writelog k3 transmit every scond   rdonner at dslextreme.com
• [Elecraft] QRO = KPA500 and the KPAK3AUX   AB3EN
• [Elecraft] Local Noise Problem   AB8XA
• [Elecraft] KPA500..Now?   Mike AI6II
• [Elecraft] KPA500..Now?   Mike AI6II
• [Elecraft] KPA500..Now?   Mike AI6II
• [Elecraft] KPA500..Now!!!   Mike AI6II
• [Elecraft] [K3] K3+P3+HRD/Logbk +CW Skimmer -How to set it up?   Mike AI6II
• [Elecraft] K3 - Value on the used market?   AK4IK_Ian
• [Elecraft] K60XV Low Power Issue   Mark Adams
• [Elecraft] linux/wine for K144XV/K3 Utility   Adrian
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Adrian
• [Elecraft] K2 Ladder Line Run for Dipole   Paul Agoglia
• [Elecraft] K2 Initial Test   Paul Agoglia
• [Elecraft] KX-1 buttons   Albers
• [Elecraft] New Amp   Tommy Alderman
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Tommy Alderman
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Tommy Alderman
• [Elecraft] Keyboard for sale   Ken Alexander
• [Elecraft] K2/100 pwr out control problem   Ken Alexander
• [Elecraft] KPA 500 and ATU   Brian Alsop
• [Elecraft] K3 - new product "demand"   Brian Alsop
• [Elecraft] P3 and SSTV   Brian Alsop
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Brian Alsop
• [Elecraft] High Power ATU's suitable for the new AMP~   Nels Anderson
• [Elecraft] K3STFNR   Raymond Anderson
• [Elecraft] small K3 firmware suggestion   Adi Andrei
• [Elecraft] For Mac users only   Adi Andrei
• [Elecraft] K3 receive audio   Adi Andrei
• [Elecraft] K3 filter question   Adi Andrei
• [Elecraft] K3 filter question   Adi Andrei
• [Elecraft] Possible firmware bug - Diversity receive   Adi Andrei
• [Elecraft] UK SSB Elecraft Net   Adi Andrei
• [Elecraft] FS: Rohde & Schwarz CMTA84 Communications Analyzer   Howard Ashcraft
• [Elecraft] Just ordered the KPA500   Fred Atchley
• [Elecraft] re KPA 500 and ATU   Fred Atchley
• [Elecraft] Elecraft K2 Rework Eliminator Kit.   Fred Atchley
• [Elecraft] New K1 Owner -- Which ATU?   Michael Babineau
• [Elecraft] K2 + ATU + Loop antenna in the attic   Michael Babineau
• [Elecraft] [K2] Hardened K2 for HFPack?   Eugene Balinski
• [Elecraft] KPA500 feature suggestion - band bypass   Eugene Balinski
• [Elecraft] K3V - another new product speculation   Eugene Balinski
• [Elecraft] OT: ICE still functioning?   Jim Balls
• [Elecraft] ARRL FMT April 13 - 0215utc (K3EXREF)   Nate Bargmann
• [Elecraft] linux/wine for K144XV/K3 Utility   Nate Bargmann
• [Elecraft] linux/wine for K144XV/K3 Utility   Nate Bargmann
• [Elecraft] linux/wine for K144XV/K3 Utility   Nate Bargmann
• [Elecraft] linux/wine for K144XV/K3 Utility   Nate Bargmann
• [Elecraft] CQRLOG and K3   Nate Bargmann
• [Elecraft] K-line   Barry
• [Elecraft] optimizing recorded audio   Barry
• [Elecraft] [K3] Is it possible to up/download audio files from M1-M4?   Barry
• [Elecraft] K3V - another new product speculation   Erik Basilier
• [Elecraft] K3 receive audio   Erik Basilier
• [Elecraft] K3V - another new product speculation   Erik Basilier
• [Elecraft] K3 receive audio   Erik Basilier
• [Elecraft] K3V - another new product speculation   Erik Basilier
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   G. Beat
• [Elecraft] [K2] 60W temperature controlled iron   G. Beat
• [Elecraft] K3, P3 & KPA500   Bruce Beford
• [Elecraft] K3, P3 & KPA500   Bruce Beford
• [Elecraft] K3EXREF for eme and mw   Bruce Beford
• [Elecraft] ARRL FMT April 13 - 0215utc (K3EXREF)   Bruce Beford
• [Elecraft] KX1 with 30/80 option - band cycling now limited to   Bruce Beford
• [Elecraft] Looking for K7SZ   Bruce Beford
• [Elecraft] KPA500 First run sold out?   Bruce Beford
• [Elecraft] Info on K3 "IF OUT"   Bruce Beford
• [Elecraft] KAT 500   Bruce Beford
• [Elecraft] New XG3 f/w includes CW beacon mode   Bruce Beford
• [Elecraft] New XG3 f/w includes CW beacon mode   Bruce Beford
• [Elecraft] "Off-Topic" posts   Bruce Beford
• [Elecraft] Terrible news   Bruce Beford
• [Elecraft] KPA500 Assembly Manual   Helmut Berka
• [Elecraft] KPA500 Mmanual ?   Bill
• [Elecraft] K3EXREF and Trimble Thunderbolts   Bill
• [Elecraft] Comments?   Bill
• [Elecraft] FS: KAT2   Sam Binkley
• [Elecraft] FS: KAT2   Sam Binkley
• [Elecraft] P3 Phantom signal?   Alan Bloom
• [Elecraft] Ligntning protection   Alan Bloom
• [Elecraft] RS 232 Connections   Alan Bloom
• [Elecraft] XG3 device...   Alan Bloom
• [Elecraft] XG3 All-Band RF Signal Source/phase noise performance?   Alan Bloom
• [Elecraft] XG3 device...   Alan Bloom
• [Elecraft] XG3 device...   Alan Bloom
• [Elecraft] XG3 device...   Alan Bloom
• [Elecraft] XG3 device...   Alan Bloom
• [Elecraft] XG3 device...   Alan Bloom
• [Elecraft] K3_P3_160_CW   Alan Bloom
• [Elecraft] Odd Question [Elecraft history]   Alan Bloom
• [Elecraft] Info on K3 "IF OUT"   Alan Bloom
• [Elecraft] P3 Macro question   Alan Bloom
• [Elecraft] P3 Question   Alan Bloom
• [Elecraft] P3 and SSTV   Alan Bloom
• [Elecraft] Fw: ESSB   Alan Bloom
• [Elecraft] Fw: ESSB   Alan Bloom
• [Elecraft] Fw: ESSB   Alan Bloom
• [Elecraft] WA2EWE-T6AF SK   Alan Bloom
• [Elecraft] OT: ICE still functioning?   Alan Bloom
• [Elecraft] OT: ICE still functioning?   Alan Bloom
• [Elecraft] Band pass filters, was ICE   Alan Bloom
• [Elecraft] understanding screw sizes   Bob
• [Elecraft] Yaesu FL-7000   Larry Boekeloo
• [Elecraft] K-3 used value   Kim Bottles
• [Elecraft] K£ - Multiple faults   Tom Boucher
• [Elecraft] [K3] Sudden loss of output power   Tom Boucher
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Jack Brabham
• [Elecraft] P3   Ernst Brackhaus
• [Elecraft] K3, P3 & KPA500   Jack Brindle
• [Elecraft] K3, P3 & KPA500   Jack Brindle
• [Elecraft] KPA500 to K3 ACC Connector   Jack Brindle
• [Elecraft] KPA-500 & KRC2   Jack Brindle
• [Elecraft] KPA500 and K2   Jack Brindle
• [Elecraft] 14.316 help!   Jack Brindle
• [Elecraft] KPA500 AUX input   Jack Brindle
• [Elecraft] KPA500 AUX input   Jack Brindle
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Jim Brown
• [Elecraft] Local Noise Problem   Jim Brown
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Jim Brown
• [Elecraft] Local Noise Problem   Jim Brown
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Jim Brown
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Jim Brown
• [Elecraft] Local Noise Problem   Jim Brown
• [Elecraft] Local Noise Problem   Jim Brown
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Jim Brown
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Jim Brown
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Jim Brown
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Jim Brown
• [Elecraft] KPA 500 and ATU   Jim Brown
• [Elecraft] K3 Serial port problems?   Jim Brown
• [Elecraft] Mac Grounding   Jim Brown
• [Elecraft] Mac Grounding   Jim Brown
• [Elecraft] Mac Grounding   Jim Brown
• [Elecraft] P3 Manual Updates   Jim Brown
• [Elecraft] Odd Question [Elecraft history]   Jim Brown
• [Elecraft] optimizing recorded audio   Jim Brown
• [Elecraft] optimizing recorded audio   Jim Brown
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Jim Brown
• [Elecraft] OT: ICE still functioning?   Jim Brown
• [Elecraft] Band pass filters, was ICE   Jim Brown
• [Elecraft] Band pass filters, was ICE   Jim Brown
• [Elecraft] Problem loading XG3 firmware   Greg Buhyoff
• [Elecraft] XG3 firmware load problem continued   Greg Buhyoff
• [Elecraft] XG3 firmware load problem continued   Greg Buhyoff
• [Elecraft] XG3 firmware load problem continued -- more info   Greg Buhyoff
• [Elecraft] XG3 problem with Utility fixed!   Greg Buhyoff
• [Elecraft] XG3 Problem fixed -- Thanks, Guy   Greg Buhyoff
• [Elecraft] Odd Question   Lee Buller
• [Elecraft] Off Topic - CME   Lee Buller
• [Elecraft] K3 +sign in display   Wayne Burdick
• [Elecraft] K3 VOX delay, BG command   Wayne Burdick
• [Elecraft] KPA500..Now?   Wayne Burdick
• [Elecraft] K3 - Bug in firmware found?   Wayne Burdick
• [Elecraft] How do KX1 and K1 receivers match up to K2, K3??   Wayne Burdick
• [Elecraft] S meter command   Wayne Burdick
• [Elecraft] K3EXREF and Trimble Thunderbolts   Wayne Burdick
• [Elecraft] KPA500 feature suggestion - band bypass   Wayne Burdick
• [Elecraft] New signal generator XG3   Wayne Burdick
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Wayne Burdick
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Wayne Burdick
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Wayne Burdick
• [Elecraft] New Elecraft Product: PLL Reference Lock Option for the K144XV 2-Meter Module   Wayne Burdick
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Wayne Burdick
• [Elecraft] XG3 All-Band RF Signal Source/phase noise performance?   Wayne Burdick
• [Elecraft] [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource   Wayne Burdick
• [Elecraft] XG3 and IMD testing   Wayne Burdick
• [Elecraft] XG3 and IMD testing   Wayne Burdick
• [Elecraft] K3EXREF Questions   Wayne Burdick
• [Elecraft] [K3] No RSP for some K3 commands   Wayne Burdick
• [Elecraft] P3 Manual Updates   Wayne Burdick
• [Elecraft] P3 Manual Updates   Wayne Burdick
• [Elecraft] Odd Question [Elecraft history]   Wayne Burdick
• [Elecraft] XG3 Arrived   Wayne Burdick
• [Elecraft] SWL question   Wayne Burdick
• [Elecraft] SWL question   Wayne Burdick
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   Wayne Burdick
• [Elecraft] ESSB   Wayne Burdick
• [Elecraft] K3 Beta Firmware Rev. 4.36: QRQ mode auto-on/off when using SPLIT/RIT/XIT (etc.)   Wayne Burdick
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Wayne Burdick
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   pcbyrne
• [Elecraft] understanding screw sizes   WILLIS COOKE
• [Elecraft] Interface question.   WILLIS COOKE
• [Elecraft] OT trying to identify "mystery" coax cable   WILLIS COOKE
• [Elecraft] Ligntning protection   WILLIS COOKE
• [Elecraft] Off Topic - CME   WILLIS COOKE
• [Elecraft] OT: ICE still functioning?   WILLIS COOKE
• [Elecraft] KD9SV beverage switch and DXDoubler with N1MM   Jorge Diez - CX6VM
• [Elecraft] K3/100 power supply   Jorge Diez - CX6VM
• [Elecraft] K3 - BNC switch for RX IN & AUX?   Jorge Diez - CX6VM
• [Elecraft] K3 - BNC switch for RX IN & AUX?   Jorge Diez - CX6VM
• [Elecraft] OT: ICE still functioning?   Jorge Diez - CX6VM
• [Elecraft] understanding screw sizes   Pierfrancesco Caci
• [Elecraft] understanding screw sizes   Pierfrancesco Caci
• [Elecraft] [K3] vfo b front panel hole   Pierfrancesco Caci
• [Elecraft] K3 #5305 completed!   Pierfrancesco Caci
• [Elecraft] K3 - 2 questions about memories   Pierfrancesco Caci
• [Elecraft] K3 - 3 questions about memories   Pierfrancesco Caci
• [Elecraft] K3 sending ? instead of FA/FB when pressing REV   Pierfrancesco Caci
• [Elecraft] query on K3 serial application with JT65a   Pierfrancesco Caci
• [Elecraft] [K3] computer/macro access to certain parameters   Pierfrancesco Caci
• [Elecraft] question about K3 memories and VFO B   Pierfrancesco Caci
• [Elecraft] question about K3 memories and VFO B   Pierfrancesco Caci
• [Elecraft] question about K3 memories and VFO B   Pierfrancesco Caci
• [Elecraft] K3 Serial port problems?   Cady, Fred
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Cady, Fred
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)/DXpedition version of P3   Cady, Fred
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Cady, Fred
• [Elecraft] question about K3 memories and VFO B   Cady, Fred
• [Elecraft] K3 and CW-Skimmer   Jim Campbell
• [Elecraft] K2 Control Cable Question   Jim Campbell
• [Elecraft] K2 Control Cable Question   Jim Campbell
• [Elecraft] K2 Control Cable Question   Jim Campbell
• [Elecraft] K2 Control Cable Question - Recap   Jim Campbell
• [Elecraft] FT-100 Knob?   TJ Campie
• [Elecraft] KAT 500   Duncan Carter
• [Elecraft] 14.316 help! (Luigi Casari HB9CXZ)   Luigi Casari
• [Elecraft] K1 #2973 on the Air   Eric Champine
• [Elecraft] New K1 Owner -- Which ATU?   Eric Champine
• [Elecraft] K1 #2973 on the Air   Eric Champine
• [Elecraft] New product suggestion   Eric Champine
• [Elecraft] New product suggestion   Eric Champine
• [Elecraft] For Mac users only   Eric Champine
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Champine
• [Elecraft] XG3 shipping status - Any received?   Eric Champine
• [Elecraft] KPA-500 questions   David Christ
• [Elecraft] Elecraft at Dayton   David Christ
• [Elecraft] K3EXREF and Trimble Thunderbolts   Paul Christensen
• [Elecraft] K3EXREF and Trimble Thunderbolts   Paul Christensen
• [Elecraft] K3EXREF and Trimble Thunderbolts   Paul Christensen
• [Elecraft] K3EXREF and Trimble Thunderbolts   Paul Christensen
• [Elecraft] K3EXREF and Trimble Thunderbolts   Paul Christensen
• [Elecraft] K3EXREF and Trimble Thunderbolts   Paul Christensen
• [Elecraft] K3EXREF Questions   Paul Christensen
• [Elecraft] K3EXREF   Paul Christensen
• [Elecraft] K3EXREF Questions   Paul Christensen
• [Elecraft] Odd Question [Elecraft history]   Paul Christensen
• [Elecraft] K3 SWR Readout Accuracy Question   Ron D'Eau Claire
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Ron D'Eau Claire
• [Elecraft] Local Noise Problem   Ron D'Eau Claire
• [Elecraft] KPA500 feature suggestion - band bypass   Ron D'Eau Claire
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Ron D'Eau Claire
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Ron D'Eau Claire
• [Elecraft] Another KPA500 on order!   Ron D'Eau Claire
• [Elecraft] understanding screw sizes   Ron D'Eau Claire
• [Elecraft] K2 + ATU + Loop antenna in the attic   Ron D'Eau Claire
• [Elecraft] OT trying to identify "mystery" coax cable   Ron D'Eau Claire
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Ron D'Eau Claire
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Ron D'Eau Claire
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Ron D'Eau Claire
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Ron D'Eau Claire
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Ron D'Eau Claire
• [Elecraft] XG3 device...   Ron D'Eau Claire
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Ron D'Eau Claire
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Ron D'Eau Claire
• [Elecraft] K2 + ATU + Loop antenna in the attic   Ron D'Eau Claire
• [Elecraft] K2 + ATU + Loop antenna in the attic   Ron D'Eau Claire
• [Elecraft] K3EXREF Questions   Ron D'Eau Claire
• [Elecraft] K3EXREF Questions   Ron D'Eau Claire
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Ron D'Eau Claire
• [Elecraft] The Good Kind of IMD for CW buffs   Ron D'Eau Claire
• [Elecraft] The Good Kind of IMD for CW buffs   Ron D'Eau Claire
• [Elecraft] KX1 strikes again   Ron D'Eau Claire
• [Elecraft] XG3 Arrived   Ron D'Eau Claire
• [Elecraft] KX1 strikes again   Ron D'Eau Claire
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Ron D'Eau Claire
• [Elecraft] static charges   Ron D'Eau Claire
• [Elecraft] SWL question   Ron D'Eau Claire
• [Elecraft] SWL question   Ron D'Eau Claire
• [Elecraft] SWL question   Ron D'Eau Claire
• [Elecraft] Recalibrating XV144 with phase lock option   Ron D'Eau Claire
• [Elecraft] [K3] k144xv M>V relay clicking?   Ron D'Eau Claire
• [Elecraft] [K3] k144xv M>V relay clicking?   Ron D'Eau Claire
• [Elecraft] 14.316 help!   Ron D'Eau Claire
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   Ron D'Eau Claire
• [Elecraft] KPA500 Connector - manual vs picture mismatch *update*   Ron D'Eau Claire
• [Elecraft] KPA500 Connector - manual vs picture mismatch *update*   Ron D'Eau Claire
• [Elecraft] Off Topic - CME   Ron D'Eau Claire
• [Elecraft] OT: ICE still functioning?   Ron D'Eau Claire
• [Elecraft] UK SSB Elecraft Net   Ron D'Eau Claire
• [Elecraft] SSB voice auto-tune   Ron D'Eau Claire
• [Elecraft] UK SSB Elecraft Net   Ron D'Eau Claire
• [Elecraft] K3 loss of output power   Mike Clarke
• [Elecraft] K3 loss of output power   Mike Clarke
• [Elecraft] SDR IQ/IF Questions   Torsten Clay
• [Elecraft] CQRLOG and K3   Torsten Clay
• [Elecraft] K3 SWR Readout Accuracy Question   Edward R. Cole
• [Elecraft] Local Noise Problem   Edward R. Cole
• [Elecraft] K3EXREF and Trimble Thunderbolts   Edward R. Cole
• [Elecraft] K3EXREF and Trimble Thunderbolts   Edward R. Cole
• [Elecraft] K3EXREF for eme and mw   Edward R. Cole
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   Edward R. Cole
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   Edward R. Cole
• [Elecraft] ARRL FMT April 13 - 0215utc (K3EXREF)   Edward R. Cole
• [Elecraft] K3V - another new product speculation   Edward R. Cole
• [Elecraft] Mac Grounding   Edward R. Cole
• [Elecraft] OT trying to identify "mystery" coax cable   Edward R. Cole
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Edward R. Cole
• [Elecraft] [Elecraft_K3] New Elecraft Product: PLL Reference Lock Option for the K144XV 2-Meter Module   Edward R. Cole
• [Elecraft] XG3 ordered   Edward R. Cole
• [Elecraft] 10 Mhz Reference Oscillator   Edward R. Cole
• [Elecraft] Multi-band (Fan) Dipoles   Edward R. Cole
• [Elecraft] K3EXREF Questions   Edward R. Cole
• [Elecraft] K3EXREF   Edward R. Cole
• [Elecraft] Elecraft SSB Net results (4-17-11)   Edward R. Cole
• [Elecraft] XG3 shipping status - Any received?   Edward R. Cole
• [Elecraft] XG3 Arrived   Edward R. Cole
• [Elecraft] XG3 Arrived   Edward R. Cole
• [Elecraft] factory built k3/100/F   Edward R. Cole
• [Elecraft] Subject: Re: Odd Question [Elecraft history]   Edward R. Cole
• [Elecraft] XG3 Arrived   Edward R. Cole
• [Elecraft] Info on K3 "IF OUT"   Edward R. Cole
• [Elecraft] 14.316 help!   Edward R. Cole
• [Elecraft] Elecraft SSB Net Report (4/24/11)   Edward R. Cole
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Edward R. Cole
• [Elecraft] New XG3 f/w includes CW beacon mode   Edward R. Cole
• [Elecraft] UK SSB Elecraft Net   Edward R. Cole
• [Elecraft] KPA-500 & KRC2   Bill Coleman
• [Elecraft] KPA500 feature suggestion - band bypass   Bill Coleman
• [Elecraft] K3 & KPA-500   Bill Coleman
• [Elecraft] KPA500 AUX Button & Serial cabling   Bill Coleman
• [Elecraft] KPA500 Connector - manual vs picture mismatch   Bill Coleman
• [Elecraft] KPA500 Connector - manual vs picture mismatch *update*   Bill Coleman
• [Elecraft] K2 Control Cable Question   Bill Coleman
• [Elecraft] re KPA 500 and ATU   David and Dianne on Comcast
• [Elecraft] Heil Goldline   Bill Conkling
• [Elecraft] S-Meter Calibration   Bill Conkling
• [Elecraft] Odd Question   Bill Conkling
• [Elecraft] ERR IO3   Robert 'RC' Conley
• [Elecraft] ERR IO3 AGAIN   Robert 'RC' Conley
• [Elecraft] ERR IO3 more!!   Robert 'RC' Conley
• [Elecraft] K2 + ATU + Loop antenna in the attic   Wayne Conrad
• [Elecraft] K2 + ATU + Loop antenna in the attic   Wayne Conrad
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Wayne Conrad
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Wayne Conrad
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Wayne Conrad
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Wayne Conrad
• [Elecraft] [K2] Control board booboo?   Wayne Conrad
• [Elecraft] [K2] Control board booboo?   Wayne Conrad
• [Elecraft] [K2] 60W temperature controlled iron   Wayne Conrad
• [Elecraft] [K2] 60W temperature controlled iron   Wayne Conrad
• [Elecraft] K2 transmit low power, high current   Wayne Conrad
• [Elecraft] K2 transmit low power, high current   Wayne Conrad
• [Elecraft] K2 measuring non-RF AC voltages with a DC meter   Wayne Conrad
• [Elecraft] K2 measuring non-RF AC voltages with a DC meter   Wayne Conrad
• [Elecraft] K3/100 power supply   Randy Cook
• [Elecraft] birdies on 20m/ K2   John Cooper
• [Elecraft] using a scope on a k2   John Cooper
• [Elecraft] key dot weight   John Cooper
• [Elecraft] spectrogram no signal   John Cooper
• [Elecraft] Fw: [K2] Control board booboo?   John Cooper
• [Elecraft] ec2 parts   John Cooper
• [Elecraft] 14.316 help!   John Cooper
• [Elecraft] Fw: ?change net frequency?   John Cooper
• [Elecraft] SSB Net Frequency (14.316, etc.)   John Cooper
• [Elecraft] looking for a kxpd1 or the bracket   John Cooper
• [Elecraft] rfc sub on kx60   John Cooper
• [Elecraft] Re: Odd Question [Elecraft history]   Bert Craig
• [Elecraft] OT: ICE still functioning?   Bert Craig
• [Elecraft] understanding screw sizes   Gilbert Cross
• [Elecraft] New K1 Owner -- Which ATU?   Curt
• [Elecraft] [K2]Speaker Quit   Curt
• [Elecraft] [K2]Speaker Quit   Curt
• [Elecraft] Local Noise Problem   David Cutter
• [Elecraft] Local Noise Problem   David Cutter
• [Elecraft] Local Noise Problem   David Cutter
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   David Cutter
• [Elecraft] XG3 and IMD testing   David Cutter
• [Elecraft] k-2 atu   JAMES DAVIDSON
• [Elecraft] thanks   JAMES DAVIDSON
• [Elecraft] k2   JAMES DAVIDSON
• [Elecraft] k2 read out ?   JAMES DAVIDSON
• [Elecraft] K3: is it VFO A or B   DL5OCD
• [Elecraft] K3: is it VFO A or B   DL5OCD
• [Elecraft] ESSB   DL5OCD
• [Elecraft] K3 - Value on the used market?   Keith Darwin
• [Elecraft] (no subject)   Dave
• [Elecraft] S meter command   Dave
• [Elecraft] KPA500 feature suggestion - band bypass   Dave
• [Elecraft] OT: ICE still functioning?   Dave
• [Elecraft] UK SSB Elecraft Net   Dave
• [Elecraft] Rose the carrying case Lady   Dave Anderson, K4SV
• [Elecraft] Rose the carrying case Lady, UPDATE   Dave Anderson, K4SV
• [Elecraft] P3 Manual Updates   Dave Aslin, G3WGN
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Dave, G4AON
• [Elecraft] K2 keying question   Alan Davenport
• [Elecraft] Taxes Due   David Ferrington, M0XDF
• [Elecraft] RE Taxes Due   David Ferrington, M0XDF
• [Elecraft] [K3] Why fuse the negative lead from a battery?   David Ferrington, M0XDF
• [Elecraft] [K3] Why fuse the negative lead from a battery?   David Ferrington, M0XDF
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   David Ferrington, M0XDF
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   David Ferrington, M0XDF
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   David Ferrington, M0XDF
• [Elecraft] UK SSB Elecraft Net   David Ferrington, M0XDF
• [Elecraft] For Sale K3/100-F P3-F Optional Amp   Dayn
• [Elecraft] For Sale K3/100-F P3-F Optional Amp   Dayn
• [Elecraft] K3, P3 & KPA500   Toby Deinhardt
• [Elecraft] KPA-500 / K3 firmware suggestion   Toby Deinhardt
• [Elecraft] Yet another product idea   Toby Deinhardt
• [Elecraft] Yet another product idea   Toby Deinhardt
• [Elecraft] New K1 Owner -- Which ATU?   Rick Dettinger
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Rick Dettinger
• [Elecraft] Xyl/KPA500   Rick Dettinger
• [Elecraft] Groundi loops   Rick Dettinger
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Rick Dettinger
• [Elecraft] UK SSB Elecraft Net   Rick Dettinger
• [Elecraft] Ligntning protection   Dick
• [Elecraft] RS 232 Connections   Dick
• [Elecraft] K3 and CW-Skimmer   Dick
• [Elecraft] J-38 Key   Dick
• [Elecraft] KAT3 memory segments per band   Dick Dievendorff
• [Elecraft] KPA500 Remote   Dick Dievendorff
• [Elecraft] linux/wine for K144XV/K3 Utility   Dick Dievendorff
• [Elecraft] XG3 Utility   Dick Dievendorff
• [Elecraft] Another thought for the XG3 Utility   Dick Dievendorff
• [Elecraft] Another thought for the XG3 Utility   Dick Dievendorff
• [Elecraft] Engraved Brass Plates for Attachment to K3   TE Dinkins
• [Elecraft] Response to Engraved Brass Plates for Attachment to K3   TE Dinkins
• [Elecraft] UK SSB Elecraft Net   Geoffrey Downs
• [Elecraft] K3: is it VFO A or B   Oliver "Olli" Dröse
• [Elecraft] Voice keyer built into microphone   Oliver "Olli" Dröse
• [Elecraft] K3V - another new product speculation   Oliver "Olli" Dröse
• [Elecraft] K3 keying the KPA-500 & transverter   Oliver "Olli" Dröse
• [Elecraft] OT trying to identify "mystery" coax cable   George Dubovsky
• [Elecraft] 10 Mhz Reference Oscillator   George Dubovsky
• [Elecraft] Taxes Due   Larry East
• [Elecraft] RE Taxes Due   Larry East
• [Elecraft] KPA500..Now?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KPA500..Now?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K3 and MARS use   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KPA-500 / K3 firmware suggestion [END of Thread]   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] understanding screw sizes [END of thread]   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KPA500 AUX Button & Serial cabling   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Relay noises??   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] UK SSB Elecraft Net [END of Thread - Royals Disc.]   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Scott Ellington
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Scott Ellington
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Scott Ellington
• [Elecraft] XG3 device...   Scott Ellington
• [Elecraft] XG3 device...   Scott Ellington
• [Elecraft] K3_P3_160_CW   Scott Ellington
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Steve Ellington
• [Elecraft] Ligntning protection   Steve Ellington
• [Elecraft] Ligntning protection   Steve Ellington
• [Elecraft] K3EXREF   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 Mmanual ?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 questions   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 K Ordered!   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 questions   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 questions   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 questions   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 to K3 ACC Connector   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 questions   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 questions   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 & KRC2   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 feature suggestion - band bypass   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 feature suggestion - band bypass   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K-line   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA 500 and K2...Max Output Power ?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 Assembly Manual   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Mac Grounding [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 SSB Dead   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] High Power ATU's suitable for the new AMP~   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3EXREF   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3EXREF - Not. I Meant K144XV REFLOCK   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [Elecraft_K3] New Elecraft Product: PLL Reference Lock Option for the K144XV 2-Meter Module   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Does the KPA500 have a bail to match the K3 & P3?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 ventilation clearance   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] factory built k3/100/F   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] factory built k3/100/F   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] factory built k3/100/F   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Another thought for the XG3 Utility   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [MM] XG3's in Dayton?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] XG3 Arrived   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT) [Thread closed]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New KPA500 and XG3 info pages up on the website   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] 14.316 help! [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3EXREF UPDATE   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [QRO] KPA500 PIN diodes / High SWR   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New XG3 f/w includes CW beacon mode   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New XG3 f/w includes CW beacon mode   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] OT: ICE still functioning?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] OT: ICE still functioning? [Thread ENDed]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] OT: ICE still functioning? [Thread ENDed - the OT disc portion only]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Elecraft email List Official Guidelines 2011   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Top Posting is the official standard for the Elecraft List   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Lost your list Password? - Here's how to get it.   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] RTTY Interface for the K2   Tony Estep
• [Elecraft] RTTY Interface for the K2   Tony Estep
• [Elecraft] odd rfi issue   Tony Estep
• [Elecraft] KPA500 feature suggestion - band bypass   Tony Estep
• [Elecraft] KPA500 feature suggestion - band bypass   Tony Estep
• [Elecraft] KPA500 feature suggestion - band bypass   Tony Estep
• [Elecraft] KX1 and Palm paddles   Tony Estep
• [Elecraft] re KPA 500 and ATU   Tony Estep
• [Elecraft] ARRL FMT April 13 - 0215utc (K3EXREF)   Tony Estep
• [Elecraft] Very cool propagation site   Tony Estep
• [Elecraft] Very cool propagation site   Tony Estep
• [Elecraft] K2 + ATU + Loop antenna in the attic   Tony Estep
• [Elecraft] Re k3 receive audio   Tony Estep
• [Elecraft] Re k3 receive audio   Tony Estep
• [Elecraft] AM power for KPA500   Tony Estep
• [Elecraft] XG3 device...   Tony Estep
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Tony Estep
• [Elecraft] K2 + ATU + Loop antenna in the attic   Tony Estep
• [Elecraft] KX1 30-80 meter option   Tony Estep
• [Elecraft] propagation   Tony Estep
• [Elecraft] optimizing recorded audio   Tony Estep
• [Elecraft] optimizing recorded audio   Tony Estep
• [Elecraft] optimizing recorded audio   Tony Estep
• [Elecraft] Audio Processing   Tony Estep
• [Elecraft] query on K3 serial application with JT65a   Tony Estep
• [Elecraft] 14.316 help!   Tony Estep
• [Elecraft] ERR IO3 AGAIN   Tony Estep
• [Elecraft] K2 Control Cable Question - Recap   Tony Estep
• [Elecraft] understanding screw sizes   Pete F5VNB
• [Elecraft] Need to shift 8 pole 2.1 filter?   Laurent F6DEX
• [Elecraft] KRC2 FIRMWARE FAILURE?   Laurent F6DEX
• [Elecraft] K3/100 for sale   MATTHEW CHERYL FOWLER
• [Elecraft] New product suggestion   Andrew Faber
• [Elecraft] New product suggestion   Andrew Faber
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Andrew Faber
• [Elecraft] [K3] s-meter data logger software available?   Mike Fatchett
• [Elecraft] KPA-500 K Ordered!   Mike Fatchett
• [Elecraft] KPA-500 questions   Mike Fatchett
• [Elecraft] KPA-500 K Ordered!   Mike Fatchett
• [Elecraft] KPA500 feature suggestion - band bypass   Mike Fatchett
• [Elecraft] KPA-500 / K3 firmware suggestion   Mike Fatchett
• [Elecraft] re KPA 500 and ATU   Mike Fatchett
• [Elecraft] KPA-500 / K3 firmware suggestion   Mike Fatchett
• [Elecraft] KPA-500 / K3 firmware suggestion   Mike Fatchett
• [Elecraft] KPA 500   Mike Fatchett
• [Elecraft] KAT500   Mike Fatchett
• [Elecraft] K3 - new product "demand"   Mike Fatchett
• [Elecraft] Problem with K3 receive audio   Mike Fatchett
• [Elecraft] Yet another product idea   Mike Fatchett
• [Elecraft] KPA500 kit   Mike Fatchett
• [Elecraft] Two issues with data transmission   Richard Ferch
• [Elecraft] K3 synthesizer spur?   Richard Ferch
• [Elecraft] k3 Voice ID while in Data A mode   Richard Fjeld
• [Elecraft] Fw: k3 Voice ID while in Data A mode   Richard Fjeld
• [Elecraft] KX1 tuning   Chris Fowler
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   FredJensen
• [Elecraft] The Good Kind of IMD for CW buffs   FredJensen
• [Elecraft] Ligntning protection   FredJensen
• [Elecraft] KPA500 RF Input   Robert Friess
• [Elecraft] KPA500 kit   Robert Friess
• [Elecraft] XG3 device...   Robert Friess
• [Elecraft] Does the KPA500 have a bail to match the K3 & P3?   Robert Friess
• [Elecraft] The Good Kind of IMD for CW buffs   Robert Friess
• [Elecraft] [K2] Hardened K2 for HFPack?   John Fritze
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Matthew D. Fuller
• [Elecraft] Alternate microphones for K3   G4LNA
• [Elecraft] Ligntning protection   GDanner
• [Elecraft] P3 Frequency Display: My Mind is on Vacation   GDanner
• [Elecraft] KPA500 ventilation clearance   GDanner
• [Elecraft] SSB Net Frequency (14.316, etc.)   GDanner
• [Elecraft] [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource   Ian White GM3SEK
• [Elecraft] K3_P3_160_CW   Ian White GM3SEK
• [Elecraft] optimizing recorded audio   Ian White GM3SEK
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Ian White GM3SEK
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Ian White GM3SEK
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Ian White GM3SEK
• [Elecraft] KPA-500 shipping status?   T Gahagan
• [Elecraft] New Amp   Hank Garretson
• [Elecraft] key dot weight   Hank Garretson
• [Elecraft] SSB voice auto-tune   Hank Garretson
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Gary
• [Elecraft] P3 Manual Updates   Gary
• [Elecraft] KPA500 and K2   George
• [Elecraft] Batteries, batteries, batteries   David Gilbert
• [Elecraft] KPA-500 / K3 firmware suggestion   David Gilbert
• [Elecraft] KPA-500 / K3 firmware suggestion   David Gilbert
• [Elecraft] KPA-500 / K3 firmware suggestion   David Gilbert
• [Elecraft] New product suggestion   David Gilbert
• [Elecraft] New product suggestion   David Gilbert
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   David Gilbert
• [Elecraft] XG3 Utility   David Gilbert
• [Elecraft] factory built k3/100/F   David Gilbert
• [Elecraft] factory built k3/100/F   David Gilbert
• [Elecraft] Another thought for the XG3 Utility   David Gilbert
• [Elecraft] Another thought for the XG3 Utility   David Gilbert
• [Elecraft] optimizing recorded audio   David Gilbert
• [Elecraft] Comments?   David Gilbert
• [Elecraft] SSB voice auto-tune   Eduardo González
• [Elecraft] [K3] SSB voice auto-clarifier   Eduardo González
• [Elecraft] Keyboard for sale   Greg
• [Elecraft] Yet another product idea   Greg
• [Elecraft] Yet another product idea   Greg
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Greg
• [Elecraft] Need to shift 8 pole 2.1 filter?   Greg
• [Elecraft] NVIS antenna   Greg
• [Elecraft] cw decoder on writelog   Greg
• [Elecraft] K3 in Nepal   Gary Gregory
• [Elecraft] KPA500..Now?   Gary Gregory
• [Elecraft] Taxes Due   Gary Gregory
• [Elecraft] KPA500   Gary Gregory
• [Elecraft] KPA500..Now?   Gary Gregory
• [Elecraft] K3 - Bug in firmware found?   Gary Gregory
• [Elecraft] KAT3 memory segments per band   Gary Gregory
• [Elecraft] KPA500 feature suggestion - band bypass   Gary Gregory
• [Elecraft] re KPA 500 and ATU   Gary Gregory
• [Elecraft] KPA-500 / K3 firmware suggestion   Gary Gregory
• [Elecraft] KPA-500 / K3 firmware suggestion   Gary Gregory
• [Elecraft] New product suggestion   Gary Gregory
• [Elecraft] Another KPA500 on order!   Gary Gregory
• [Elecraft] K3: KPA500 vs XYL   Gary Gregory
• [Elecraft] K3: KPA500 vs XYL   Gary Gregory
• [Elecraft] K3 - new product "demand"   Gary Gregory
• [Elecraft] K3/100 power supply   Gary Gregory
• [Elecraft] Re. K3 receive audio   Gary Gregory
• [Elecraft] Interface question.   Gary Gregory
• [Elecraft] Re k3 receive audio   Gary Gregory
• [Elecraft] K3 cooling fan cycling   Gary Gregory
• [Elecraft] Re k3 receive audio   Gary Gregory
• [Elecraft] P3 Manual Updates   Gary Gregory
• [Elecraft] K3 - Value on the used market?   Gary Gregory
• [Elecraft] factory built k3/100/F   Gary Gregory
• [Elecraft] factory built k3/100/F   Gary Gregory
• [Elecraft] Another thought for the XG3 Utility   Gary Gregory
• [Elecraft] New Baby   Gary Gregory
• [Elecraft] optimizing recorded audio   Gary Gregory
• [Elecraft] optimizing recorded audio   Gary Gregory
• [Elecraft] optimizing recorded audio   Gary Gregory
• [Elecraft] optimizing recorded audio   Gary Gregory
• [Elecraft] Audio Processing   Gary Gregory
• [Elecraft] XG3 problem with Utility fixed!   Gary Gregory
• [Elecraft] K3 50 Mhz power out   Gary Gregory
• [Elecraft] New Amp   Gary Gregory
• [Elecraft] Comments?   Gary Gregory
• [Elecraft] 14.316 help!   Gary Gregory
• [Elecraft] P3 and SSTV   Gary Gregory
• [Elecraft] P3 and SSTV   Gary Gregory
• [Elecraft] ?change net frequency?   Gary Gregory
• [Elecraft] P3 and SSTV   Gary Gregory
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Gary Gregory
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Gary Gregory
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Gary Gregory
• [Elecraft] WA2EWE-T6AF SK   Gary Gregory
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Gary Gregory
• [Elecraft] Terrible news   Gary Gregory
• [Elecraft] OT: ICE still functioning?   Gary Gregory
• [Elecraft] UK SSB Elecraft Net   Gary Gregory
• [Elecraft] KPA-500   Gary Gregory
• [Elecraft] KX1 Red Display Filter   Chuck Guenther
• [Elecraft] KX1 and Palm paddles   Chuck Guenther
• [Elecraft] KX1 - Power Amplifier Q6 Installation Question   Chuck Guenther
• [Elecraft] KX1 - Power Amplifier Q6 Installation Question   Chuck Guenther
• [Elecraft] Mac Grounding   David Guernsey
• [Elecraft] 14.316 help!   David Guernsey
• [Elecraft] 14.316 help!   David Guernsey
• [Elecraft] Me Too: For Sale: XG2, 3 Band 1-uV / 50-uV Receiver Test Oscillator (80, 40 & 20M)   Guy
• [Elecraft] re KPA 500 and ATU   Richard Squire - HB9ANM
• [Elecraft] KPA500 AUX input   Richard Squire - HB9ANM
• [Elecraft] P3 Frequency Display: My Mind is on Vacation   Randy Hall
• [Elecraft] New signal generator XG3   Bill Hammond
• [Elecraft] New Baby   Bill Hammond
• [Elecraft] query on K3 serial application with JT65a   Dick Hanson
• [Elecraft] K3 & DXBase 2007   John Harden
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Robert Harmon
• [Elecraft] Very cool propagation site   Robert Harmon
• [Elecraft] Very cool propagation site   Robert Harmon
• [Elecraft] Mac Grounding   Robert Harmon
• [Elecraft] Mac Grounding   Robert Harmon
• [Elecraft] KPA500..Now?   John Harper
• [Elecraft] KPA500 feature suggestion - band bypass   John Harper
• [Elecraft] re KPA 500 and ATU   John Harper
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   John Harper
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   John Harper
• [Elecraft] K3: KPA500..Now?   Bill Harris
• [Elecraft] Problem with K3 receive audio   Bill Harris
• [Elecraft] 33V 1W for D19?   Bill Harris
• [Elecraft] cruise line   Gary Harrison
• [Elecraft] cruise line   Gary Harrison
• [Elecraft] FS: elecraft XG2   Michael van Hauten
• [Elecraft] FS: elecraft XG2 SOLD!   Michael van Hauten
• [Elecraft] K3EXREF and Trimble Thunderbolts   Rich Heineck
• [Elecraft] K3EXREF and Trimble Thunderbolts   Rich Heineck
• [Elecraft] 14.316 help!   Rich Heineck
• [Elecraft] 14.316 help!   Rich Heineck
• [Elecraft] [K3]Power setting   Jon K Hellan
• [Elecraft] factory built k3/100/F   Chris Hembree
• [Elecraft] P3 Manual Updates   Bill Henderson
• [Elecraft] P3 Manual Updates   Bill Henderson
• [Elecraft] P3 Manual Updates   Bill Henderson
• [Elecraft] K3 VFO episode   Gary Hinson
• [Elecraft] K3 - Bug in firmware found?   Gary Hinson
• [Elecraft] K3 100 for sale   Kjeld Holm
• [Elecraft] K3 100 for sale   Kjeld Holm
• [Elecraft] AGC Problem   David Honey
• [Elecraft] KPA500   Thomas Horsten
• [Elecraft] linux/wine for K144XV/K3 Utility   Thomas Horsten
• [Elecraft] [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource   Thomas Horsten
• [Elecraft] WA2EWE-T6AF SK   Thomas Horsten
• [Elecraft] OT: Hi-Fi audio amplifier kit   Thomas Horsten
• [Elecraft] 2M internal transverter stability   Brett Howard
• [Elecraft] WTB: K3/100   Ruben Navarro Huedo
• [Elecraft] K2: KSB2 Questions   Paul Huff
• [Elecraft] New product suggestion   Paul Huff
• [Elecraft] K3 SSB Dead   Roger Huntley
• [Elecraft] K3 VOX delay, BG command   Phil Hystad
• [Elecraft] How do KX1 and K1 receivers match up to K2, K3??   Phil Hystad
• [Elecraft] How do KX1 and K1 receivers match up to K2, K3??   Phil Hystad
• [Elecraft] Proposal for Mono-band Elecraft   Phil Hystad
• [Elecraft] For Mac users only   Phil Hystad
• [Elecraft] Mac Grounding   Phil Hystad
• [Elecraft] Mac Grounding   Phil Hystad
• [Elecraft] Mac Grounding   Phil Hystad
• [Elecraft] [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource   Phil Hystad
• [Elecraft] [K2] Kit Building Time ?   Phil Hystad
• [Elecraft] [K2] Kit Building Time ?   Phil Hystad
• [Elecraft] Li-ion batteries for KX1 ??   Phil Hystad
• [Elecraft] Li-ion batteries for KX1 ??   Phil Hystad
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Phil Hystad
• [Elecraft] Congratulations...   Edward Dickinson III
• [Elecraft] KPA500 Assembly Manual   Edward Dickinson III
• [Elecraft] K3 #5305 completed!   IZ2NYY
• [Elecraft] P3 Frequency Display: My Mind is on Vacation   David Inger
• [Elecraft] Does the KPA500 have a bail to match the K3 & P3?   David Inger
• [Elecraft] K2 - LED Diffuser Installation Question   Wesley Inouye
• [Elecraft] K2 - LED Diffuser Installation Question   Wesley Inouye
• [Elecraft] KX1 with 30/80 option - band cycling now limited to 7/10/14   JONES, George
• [Elecraft] K2: CAT control of K2/100 with HRD   Jay
• [Elecraft] Hector Padron   Dan & Jean
• [Elecraft] OT: ICE still functioning?   Dan & Jean
• [Elecraft] KPA500..Now?   Fred Jensen
• [Elecraft] APF - New things   Fred Jensen
• [Elecraft] K1 #2973 on the Air   Fred Jensen
• [Elecraft] K3 - Receiver desense?   Fred Jensen
• [Elecraft] K3EXREF and Trimble Thunderbolts   Fred Jensen
• [Elecraft] KAT3 memory segments per band   Fred Jensen
• [Elecraft] KAT3 memory segments per band   Fred Jensen
• [Elecraft] New product suggestion   Fred Jensen
• [Elecraft] Very cool propagation site   Fred Jensen
• [Elecraft] understanding screw sizes   Fred Jensen
• [Elecraft] K3 - new product "demand"   Fred Jensen
• [Elecraft] Problem with K3 receive audio   Fred Jensen
• [Elecraft] Xyl/KPA500   Fred Jensen
• [Elecraft] Xyl/KPA500   Fred Jensen
• [Elecraft] K2 + ATU + Loop antenna in the attic   Fred Jensen
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Fred Jensen
• [Elecraft] K2 + ATU + Loop antenna in the attic   Fred Jensen
• [Elecraft] propagation   Fred Jensen
• [Elecraft] K2 Ladder Line Run for Dipole   Fred Jensen
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Fred Jensen
• [Elecraft] 14.316 help!   Fred Jensen
• [Elecraft] Off Topic - CME   Fred Jensen
• [Elecraft] QRQ   Fred Jensen
• [Elecraft] UK SSB Elecraft Net   Fred Jensen
• [Elecraft] UK SSB Elecraft Net   Fred Jensen
• [Elecraft] K2 and data modes   Jerry
• [Elecraft] 14.316 help!   Jim
• [Elecraft] SSB Net Frequency (14.316, etc.)   Jim
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Joe Subich, W4TV
• [Elecraft] Local Noise Problem   Joe Subich, W4TV
• [Elecraft] KPA500 to K3 ACC Connector   Joe Subich, W4TV
• [Elecraft] K3EXREF and Trimble Thunderbolts   Joe Subich, W4TV
• [Elecraft] KPA-500 questions   Joe Subich, W4TV
• [Elecraft] SDR IQ/IF Questions   Joe Subich, W4TV
• [Elecraft] Yet another product idea   Joe Subich, W4TV
• [Elecraft] Problem with K3 receive audio   Joe Subich, W4TV
• [Elecraft] Problem with K3 receive audio   Joe Subich, W4TV
• [Elecraft] Yet another product idea   Joe Subich, W4TV
• [Elecraft] Yet another product idea   Joe Subich, W4TV
• [Elecraft] Yet another product idea   Joe Subich, W4TV
• [Elecraft] Yet another product idea   Joe Subich, W4TV
• [Elecraft] Mac Grounding   Joe Subich, W4TV
• [Elecraft] Mac Grounding   Joe Subich, W4TV
• [Elecraft] Groundi loops   Joe Subich, W4TV
• [Elecraft] [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource   Joe Subich, W4TV
• [Elecraft] [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource   Joe Subich, W4TV
• [Elecraft] K3_P3_160_CW   Joe Subich, W4TV
• [Elecraft] Audio Processing   Joe Subich, W4TV
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Joe Subich, W4TV
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Joe Subich, W4TV
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Joe Subich, W4TV
• [Elecraft] Yaesu FL-7000   Joe Subich, W4TV
• [Elecraft] K3 FS   John_N1JM
• [Elecraft] SSB Net Frequency (14.316, etc.)   John_N1JM
• [Elecraft] OT trying to identify "mystery" coax cable   Oliver Johns
• [Elecraft] KPA500 feature suggestion - band bypass   Lyle Johnson
• [Elecraft] Elecraft SSB Net results (4-17-11)   Lyle Johnson
• [Elecraft] k3 Voice ID while in Data A mode   Lyle Johnson
• [Elecraft] S meter command   Roger D Johnson
• [Elecraft] S meter command   Roger D Johnson
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Roger D Johnson
• [Elecraft] Sub-receiver   Roger D Johnson
• [Elecraft] Buy K3 in Europe   Julian, G4ILO
• [Elecraft] K3EXREF and Trimble Thunderbolts   Julian, G4ILO
• [Elecraft] K3EXREF and Trimble Thunderbolts   Julian, G4ILO
• [Elecraft] K3EXREF and Trimble Thunderbolts   Julian, G4ILO
• [Elecraft] K3/100 power supply   Julian, G4ILO
• [Elecraft] [Elecraft_K3] New Elecraft Product: PLL Reference Lock Option for the K144XV 2-Meter Module   Julian, G4ILO
• [Elecraft] K3EXREF Questions   Julian, G4ILO
• [Elecraft] New XG3 f/w includes CW beacon mode   Julian, G4ILO
• [Elecraft] K3STFNR   Julian, G4ILO
• [Elecraft] K2 Control Cable Question   Julian, G4ILO
• [Elecraft] New XG3 f/w includes CW beacon mode   Julian, G4ILO
• [Elecraft] "Rose" at Visalia   Ken - K0PP
• [Elecraft] The Good Kind of IMD for CW buffs   Ken - K0PP
• [Elecraft] OT: The Good Kind of IMD for CW buffs   Ken - K0PP
• [Elecraft] [K2] Kit Building Time ?   K1FFX
• [Elecraft] [K2] Kit Building Time ?   K1FFX
• [Elecraft] Local Noise Problem   Guy Olinger K2AV
• [Elecraft] AGC Problem   Guy Olinger K2AV
• [Elecraft] K3: is it VFO A or B   Guy Olinger K2AV
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Guy Olinger K2AV
• [Elecraft] re KPA 500 and ATU   Guy Olinger K2AV
• [Elecraft] New product suggestion   Guy Olinger K2AV
• [Elecraft] Proposal for Mono-band Elecraft   Guy Olinger K2AV
• [Elecraft] using a scope on a k2   Guy Olinger K2AV
• [Elecraft] K3V - another new product speculation   Guy Olinger K2AV
• [Elecraft] Problem with K3 receive audio   Guy Olinger K2AV
• [Elecraft] understanding screw sizes   Guy Olinger K2AV
• [Elecraft] Problem with K3 receive audio   Guy Olinger K2AV
• [Elecraft] Re k3 receive audio   Guy Olinger K2AV
• [Elecraft] K3 cooling fan cycling   Guy Olinger K2AV
• [Elecraft] K3 cooling fan cycling   Guy Olinger K2AV
• [Elecraft] AM power for KPA500   Guy Olinger K2AV
• [Elecraft] AM power for KPA500   Guy Olinger K2AV
• [Elecraft] [K3] KIO3 serial port replacement or repair?   Guy Olinger K2AV
• [Elecraft] New signal generator XG3   Guy Olinger K2AV
• [Elecraft] Need to shift 8 pole 2.1 filter?   Guy Olinger K2AV
• [Elecraft] Need to shift 8 pole 2.1 filter?   Guy Olinger K2AV
• [Elecraft] XG3 device...   Guy Olinger K2AV
• [Elecraft] 110 or 120 watts ??   Guy Olinger K2AV
• [Elecraft] K3 - Value on the used market?   Guy Olinger K2AV
• [Elecraft] XG3 Arrived   Guy Olinger K2AV
• [Elecraft] XG3 Arrived   Guy Olinger K2AV
• [Elecraft] optimizing recorded audio   Guy Olinger K2AV
• [Elecraft] Odd Question [Elecraft history]   Guy Olinger K2AV
• [Elecraft] XG3 firmware load problem continued   Guy Olinger K2AV
• [Elecraft] Possible firmware bug - Diversity receive   Guy Olinger K2AV
• [Elecraft] Possible firmware bug - Diversity receive   Guy Olinger K2AV
• [Elecraft] 14.316 help!   Guy Olinger K2AV
• [Elecraft] KPA500 AUX input   Guy Olinger K2AV
• [Elecraft] KPA500 AUX input   Guy Olinger K2AV
• [Elecraft] K3STFNR   Guy Olinger K2AV
• [Elecraft] Interface question.   K2GN
• [Elecraft] K3 VFO episode   Mike K2MK
• [Elecraft] K3 feature request, DUAL PB, VFO A-B independence   Mike K2MK
• [Elecraft] P3 Macro question   Mike K2MK
• [Elecraft] P3 Macro question   Mike K2MK
• [Elecraft] Batteries, batteries, batteries   Vic K2VCO
• [Elecraft] Batteries, batteries, batteries   Vic K2VCO
• [Elecraft] Batteries, batteries, batteries   Vic K2VCO
• [Elecraft] Proposal for Mono-band Elecraft   Vic K2VCO
• [Elecraft] using a scope on a k2   Vic K2VCO
• [Elecraft] understanding screw sizes   Vic K2VCO
• [Elecraft] K2 + ATU + Loop antenna in the attic   Vic K2VCO
• [Elecraft] K3/100 power supply   Vic K2VCO
• [Elecraft] P3 Macro question   Vic K2VCO
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Vic K2VCO
• [Elecraft] KPA500 Shipping   Ken Wagner K3IU
• [Elecraft] KRC2 FIRMWARE FAILURE?   K3RWN
• [Elecraft] VFO Encoder doesn't change frequency   John K3TN
• [Elecraft] Interface question.   John K3TN
• [Elecraft] OT trying to identify "mystery" coax cable   Lew Phelps K6LMP
• [Elecraft] OT trying to identify "mystery" coax cable   Lew Phelps K6LMP
• [Elecraft] New Amp   Dale Harding K7DNH
• [Elecraft] New Amp   Dale Harding K7DNH
• [Elecraft] Problem with K3 receive audio   K7WIA
• [Elecraft] XG3 shipping status ?   K7WIA
• [Elecraft] XG3 shipping status ?   K7WIA
• [Elecraft] KX1 - Power Amplifier Q6 Installation Question   K8QI
• [Elecraft] KX1 - Power Amplifier Q6 Installation Question   K8QI
• [Elecraft] KX1 Red Display Filter   K8QI
• [Elecraft] KX1 Display Delay   K8QI
• [Elecraft] KX1 30-80 meter option   K8QI
• [Elecraft] KX1 30-80 meter option   K8QI
• [Elecraft] KX1 strikes again   K8QI
• [Elecraft] Proposal for Mono-band Elecraft   Ed - K9EW
• [Elecraft] [K2] Hardened K2 for HFPack?   Gary K9GS
• [Elecraft] Yet another product idea   Gary K9GS
• [Elecraft] K3/100 power supply   Gary K9GS
• [Elecraft] Comments?   Gary K9GS
• [Elecraft] For Sale: Elecraft AF1 Audio Filter   K9OSC
• [Elecraft] Ligntning protection   John K9UWA
• [Elecraft] KPA500 Mmanual ?   Jim Miller KG0KP
• [Elecraft] K3V - another new product speculation   John KLim
• [Elecraft] KX1 strikes again   KW4H
• [Elecraft] K3 Factory Reset?   Ian Kahn
• [Elecraft] Batteries, batteries, batteries   Phil Kane
• [Elecraft] understanding screw sizes   Phil Kane
• [Elecraft] 14.316 help!   Phil Kane
• [Elecraft] OT: Hi-Fi audio amplifier kit   Phil Kane
• [Elecraft] K2 - LED Diffuser Installation Question   Alexey Kats
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   Alexey Kats
• [Elecraft] [K2] What happens above 28.8 MHz ?   Steve Kavanagh
• [Elecraft] Field trial on Appalachian Trail 13 - 14 April   Christopher Kimball
• [Elecraft] Re k3 receive audio   Robert Kirkland
• [Elecraft] K3 cooling fan cycling   Paul Kirley
• [Elecraft] K3 cooling fan cycling   Paul Kirley
• [Elecraft] Amplifier Suggestions   Lou Kolb
• [Elecraft] XG3 Arrived   Igor Kosvin
• [Elecraft] Info on K3 "IF OUT"   Igor Kosvin
• [Elecraft] Cursor color   John Kountz
• [Elecraft] KPA500   Phil LaMarche
• [Elecraft] KPA-500 K Ordered!   Phil LaMarche
• [Elecraft] Problem with K3 receive audio   Phil LaMarche
• [Elecraft] KPA500   Phil LaMarche
• [Elecraft] Ligntning protection   Phil LaMarche
• [Elecraft] KAT 500   Phil LaMarche
• [Elecraft] KAT 500   Phil LaMarche
• [Elecraft] CME off reflector...not technical expert   Phil LaMarche
• [Elecraft] Interesting   Phil LaMarche
• [Elecraft] P3 display questions   David Lankshear
• [Elecraft] KPA500 to K3 ACC Connector   Elliott Lawrence
• [Elecraft] KPA500 RF Input   Sid Leben
• [Elecraft] KPA 500 news? Look here   Leigh L. Klotz, Jr WA5ZNU
• [Elecraft] [K3] s-meter data logger software available?   John Lemay
• [Elecraft] K3V - another new product speculation   John Lemay
• [Elecraft] Amps   William Levy
• [Elecraft] High Power ATU's suitable for the new AMP~   William Levy
• [Elecraft] KPA 500   Arthur Lewis
• [Elecraft] Invitation to connect on LinkedIn   Bob Dobson via LinkedIn
• [Elecraft] John Ørvik wants to stay in touch on LinkedIn   John Ørvik via LinkedIn
• [Elecraft] Elecraft Equipment: For Display at DMRAA Hamfest (Des Moines, IA April 23, 2011   Brian Linn
• [Elecraft] K2 keying question   Ian Liston-Smith
• [Elecraft] K2 keying question   Ian Liston-Smith
• [Elecraft] XG3 device...   Al Lorona
• [Elecraft] K3: KPA500 vs XYL   Kevin Luxford
• [Elecraft] Amplifier Suggestions   Frank MacDonell
• [Elecraft] birdies on 20m/ K2   Geoffrey Mackenzie-Kennedy
• [Elecraft] KAT500   Geoffrey Mackenzie-Kennedy
• [Elecraft] [K2] What happens above 28.8 MHz ?   Geoffrey Mackenzie-Kennedy
• [Elecraft] KAT500   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2 + ATU + Loop antenna in the attic   Geoffrey Mackenzie-Kennedy
• [Elecraft] K3/100 power supply   Geoffrey Mackenzie-Kennedy
• [Elecraft] 2M internal transverter stability   Geoffrey Mackenzie-Kennedy
• [Elecraft] OT trying to identify "mystery" coax cable   Geoffrey Mackenzie-Kennedy
• [Elecraft] XG3 device...   Geoffrey Mackenzie-Kennedy
• [Elecraft] XG3 device...   Geoffrey Mackenzie-Kennedy
• [Elecraft] XG3 device...   Geoffrey Mackenzie-Kennedy
• [Elecraft] XG3 device...   Geoffrey Mackenzie-Kennedy
• [Elecraft] The Good Kind of IMD for CW buffs   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   John Magliacane
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   John Magliacane
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   John Magliacane
• [Elecraft] P3   Marc
• [Elecraft] P3 Adjustment   Marc
• [Elecraft] SWL question   Marc
• [Elecraft] XV50 transverter CW use   Leroy Marion
• [Elecraft] Yet another product idea   Leroy Marion
• [Elecraft] anyone have a KX1 or k1 that is excess   Leroy Marion
• [Elecraft] K144XV Utility for linux?   Mike Markowski
• [Elecraft] linux/wine for K144XV/K3 Utility   Mike Markowski
• [Elecraft] linux/wine for K144XV/K3 Utility   Mike Markowski
• [Elecraft] [K3] k144xv M>V relay clicking?   Mike Markowski
• [Elecraft] [K3] k144xv M>V relay clicking?   Mike Markowski
• [Elecraft] K2 with Icom AH-4?   Nick Marsh
• [Elecraft] Elecraft K-3 for sale   Nick Marsh
• [Elecraft] Looking for K7SZ   Nick Marsh
• [Elecraft] ?change net frequency?   Nick Marsh
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)/DXpedition version of P3   Nick Marsh
• [Elecraft] [K3] KIO3 serial port replacement or repair?   Martin
• [Elecraft] UK Elecraft SSB net   Ian Maude
• [Elecraft] UK Elecraft SSB net   Ian Maude
• [Elecraft] UK SSB Elecraft Net   Ian Maude
• [Elecraft] K3 - Bug in firmware found?   Vernon Mauery
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Vernon Mauery
• [Elecraft] KPA-500 K Ordered!   Rob May
• [Elecraft] [K3] Why fuse the negative lead from a battery?   James Maynard
• [Elecraft] [K3] Why fuse the negative lead from a battery?   James Maynard
• [Elecraft] [K3] Why fuse the negative lead from a battery?   James Maynard
• [Elecraft] [K3] Why fuse the negative lead from a battery?   James Maynard
• [Elecraft] [K3] Why fuse the negative lead from a battery?   James Maynard
• [Elecraft] [K3] K3EXTREF   James Maynard
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   James Maynard
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   James Maynard
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   James Maynard
• [Elecraft] Need to shift 8 pole 2.1 filter?   John McCabe
• [Elecraft] Local Noise Problem   Jim McCook
• [Elecraft] Local Noise Problem   Jim McCook
• [Elecraft] K2 - No CW Sidetone   Tom McCulloch
• [Elecraft] K2 - No CW Sidetone   Tom McCulloch
• [Elecraft] P3 Question   Tom McCulloch
• [Elecraft] KPA500 ventilation clearance   Jim McDonald
• [Elecraft] OT: ICE still functioning?   Jim McDonald
• [Elecraft] ERR IO3 AGAIN   Jim McDonald
• [Elecraft] K3   Scott McDowell
• [Elecraft] K3 problems   Scott McDowell
• [Elecraft] factory built k3/100/F   Scott McDowell
• [Elecraft] static charges   Scott McDowell
• [Elecraft] nets   Scott McDowell
• [Elecraft] SSB Net Frequency (14.316, etc.)   John Merrill
• [Elecraft] Thinking outside (or inside) the box   Ron Midwin
• [Elecraft] S meter command   Mike
• [Elecraft] KPA500 feature suggestion - band bypass   Mike
• [Elecraft] [K3]Power setting   Mike
• [Elecraft] [K3]Power setting   Mike
• [Elecraft] P3 Manual Updates   Mike
• [Elecraft] CQRLOG and K3   Mike
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Mike
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Jim Miller
• [Elecraft] 14.316 help!   Milton
• [Elecraft] K2 keying question   Curt Milton
• [Elecraft] spectrogram no signal   Curt Milton
• [Elecraft] Another KPA500 on order!   Brendan Minish
• [Elecraft] linux/wine for K144XV/K3 Utility   Brendan Minish
• [Elecraft] K3/100 power supply   Brendan Minish
• [Elecraft] K3 & DXBase 2007   Brendan Minish
• [Elecraft] 14.316 help!   Brendan Minish
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Brendan Minish
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Brendan Minish
• [Elecraft] Re k3 receive audio   Jon Moody
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Andrew Moore
• [Elecraft] k-2 atu   Andrew Moore
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Andrew Moore
• [Elecraft] Ligntning protection   Randy Moore
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Sam Morgan
• [Elecraft] any word on 8 bit data for S-meter?   Sam Morgan
• [Elecraft] 10 Mhz Reference Oscillator   Roy Morris
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Mike Morrow
• [Elecraft] Proposal for Mono-band Elecraft   Mike Morrow
• [Elecraft] Proposal for Mono-band Elecraft   Mike Morrow
• [Elecraft] Proposal for Mono-band Elecraft   Mike Morrow
• [Elecraft] KFL1- 4 Setup Confusion   Mike Morrow
• [Elecraft] Batteries for K1   Mike Morrow
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Mike Morrow
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Mike Morrow
• [Elecraft] [Elecraft_K3] New Elecraft Product: PLL Reference Lock Option for the K144XV 2-Meter Module   Jerry Muller
• [Elecraft] K3 +sign in display   Ed Muns
• [Elecraft] W2   Bill Myers
• [Elecraft] Re k3 receive audio   Barry N1EU
• [Elecraft] Re k3 receive audio   Barry N1EU
• [Elecraft] K3 filter question   Barry N1EU
• [Elecraft] View message in context   N3XX
• [Elecraft] K3 Serial port problems?   Ross Primrose N4RP
• [Elecraft] K3 Serial port problems?   Ross Primrose N4RP
• [Elecraft] K2 Control Cable Question   Ross Primrose N4RP
• [Elecraft] OT: Hi-Fi audio amplifier kit   Ross Primrose N4RP
• [Elecraft] Elecraft at Dayton   Tom Azlin N4ZPT
• [Elecraft] New product suggestion   Milt -- N5IA
• [Elecraft] OT: ICE still functioning?   Milt -- N5IA
• [Elecraft] OT: ICE still functioning?   Milt -- N5IA
• [Elecraft] KPA-500 questions   Jeff Kinzli N6GQ
• [Elecraft] KPA500 kit   Jeff Kinzli N6GQ
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   N6JW
• [Elecraft] K3 - Bug in firmware found?   iain macdonnell - N6ML
• [Elecraft] KPA-500 questions   iain macdonnell - N6ML
• [Elecraft] KPA500 and K2   iain macdonnell - N6ML
• [Elecraft] KPA500 feature suggestion - band bypass   iain macdonnell - N6ML
• [Elecraft] KPA500 feature suggestion - band bypass   iain macdonnell - N6ML
• [Elecraft] KPA500 feature suggestion - band bypass   iain macdonnell - N6ML
• [Elecraft] KPA500 feature suggestion - band bypass   iain macdonnell - N6ML
• [Elecraft] KPA-500 / K3 firmware suggestion   iain macdonnell - N6ML
• [Elecraft] KPA-500 / K3 firmware suggestion   iain macdonnell - N6ML
• [Elecraft] KPA-500 / K3 firmware suggestion   iain macdonnell - N6ML
• [Elecraft] KPA-500 / K3 firmware suggestion   iain macdonnell - N6ML
• [Elecraft] KPA 500   iain macdonnell - N6ML
• [Elecraft] Interface question.   iain macdonnell - N6ML
• [Elecraft] Need to shift 8 pole 2.1 filter?   iain macdonnell - N6ML
• [Elecraft] Need to shift 8 pole 2.1 filter?   iain macdonnell - N6ML
• [Elecraft] K2 Control Cable Question   iain macdonnell - N6ML
• [Elecraft] Rose the carrying case Lady   iain macdonnell - N6ML
• [Elecraft] NAQCC Sprint Tuesday night!   NAQCC
• [Elecraft] EMAIL ADDRESS CHANGE   NF8J
• [Elecraft] New email address   NF8J
• [Elecraft] T31A Central Kiribati Dxpedition   NF8J
• [Elecraft] KPA-500 K Ordered!   Bill NY9H
• [Elecraft] KPA500 ventilation clearance   Bill NY9H
• [Elecraft] Using WriteLog to control KDVR3   Fabio IZ4AFW / NZ1W
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Bob Naumann
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Bob Naumann
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Bob Naumann
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Bob Naumann
• [Elecraft] KPA-500 / K3 firmware suggestion   Bob Naumann
• [Elecraft] K3: is it VFO A or B   Bob Naumann
• [Elecraft] High Power ATU's suitable for the new AMP~   Bob Naumann
• [Elecraft] 14.316 help!   Don Nelson
• [Elecraft] N2CQ QRP Contest Calendar: Apr 9 - May 9, 2011   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Apr 13 - May 12, 2011   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Apr 23 - May 23, 2011   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: May 2011   Ken Newman
• [Elecraft] Franz Nieberding   Franz Nieberding
• [Elecraft] Proposal for Mono-band Elecraft   Bob Nielsen
• [Elecraft] For Mac users only   Bob Nielsen
• [Elecraft] OT: Hi-Fi audio amplifier kit   Bob Nielsen
• [Elecraft] [K3] s-meter data logger software available?   ON4WIX
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Jessie Oberreuter
• [Elecraft] cruise line   PTA_ABD
• [Elecraft] Hector Padron   Hector Padron
• [Elecraft] Hector Padron   Hector Padron
• [Elecraft] Hector Padron   Hector Padron
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Hector Padron
• [Elecraft] Terrible news   Hector Padron
• [Elecraft] New product suggestion   Dale Parfitt
• [Elecraft] K3V - another new product speculation   Dale Parfitt
• [Elecraft] K3: KPA500..Now?   Ralph Parker
• [Elecraft] KPA500 at Visalia   Ralph Parker
• [Elecraft] K3: KPA500 vs XYL   Ralph Parker
• [Elecraft] KPA500 AUX input   Ralph Parker
• [Elecraft] Ligntning protection   Kurt Pawlikowski
• [Elecraft] K2: KPA100 Removal   Jon Perelstein
• [Elecraft] K1 #2973 on the Air   Doug Person
• [Elecraft] K1 #2973 on the Air   Doug Person
• [Elecraft] More on K1 #2973   Doug Person
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Doug Person
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Doug Person
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   Doug Person
• [Elecraft] Proposal for Mono-band Elecraft   Doug Person
• [Elecraft] Proposal for Mono-band Elecraft   Doug Person
• [Elecraft] Proposal for Mono-band Elecraft   Doug Person
• [Elecraft] Proposal for Mono-band Elecraft   Doug Person
• [Elecraft] Xyl/KPA500   Doug Person
• [Elecraft] Xyl/KPA500   Doug Person
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Doug Person
• [Elecraft] FS: KFL1-2   Doug Person
• [Elecraft] K3/100 power supply   Doug Person
• [Elecraft] KFL1- 4 Setup Confusion   Doug Person
• [Elecraft] K2 + ATU + Loop antenna in the attic   Doug Person
• [Elecraft] New Baby   Doug Person
• [Elecraft] OT: Hi-Fi audio amplifier kit   Doug Person
• [Elecraft] SDR IQ/IF Questions   Larry Phipps
• [Elecraft] SDR IQ/IF Questions   Larry Phipps
• [Elecraft] Trying to get LP-100 PLOT to make K3 output   Larry Phipps
• [Elecraft] [OT] KAT500 Question   Corboy - Poteet
• [Elecraft] Mac Grounding   Rick Prather
• [Elecraft] Mac Grounding   Rick Prather
• [Elecraft] Sub-receiver   Rick Prather
• [Elecraft] Sub VFO settings   Rick Prather
• [Elecraft] Fw: ESSB   Rick Prather
• [Elecraft] K3EXREF and Trimble Thunderbolts   David Pratt
• [Elecraft] KPA-500 questions   David Pratt
• [Elecraft] Yet another product idea   David Pratt
• [Elecraft] K3EXREF Questions   David Pratt
• [Elecraft] P3 Manual Updates   David Pratt
• [Elecraft] P3 Manual Updates   David Pratt
• [Elecraft] Odd Question   David Pratt
• [Elecraft] K144XV firmware   David Pratt
• [Elecraft] Let me build your K2 or other Elecraft kit   Alan Price
• [Elecraft] Let me build your K2 of other Elecraft kit   Alan Price
• [Elecraft] Sorry for the typos   Alan Price
• [Elecraft] Email problem for W1HYV   Alan Price
• [Elecraft] (no subject)   Alan Price
• [Elecraft] My email was hi-jacked   Alan Price
• [Elecraft] Little off topic oscilloscope for sale   Alan Price
• [Elecraft] Oscilloscope for sale OT   Alan Price
• [Elecraft] Scope is sold   Alan Price
• [Elecraft] Let me build a K2 for you.   Alan Price
• [Elecraft] AGC Problem   Stephen Prior
• [Elecraft] Ligntning protection   Dale Putnam
• [Elecraft] static charges   Dale Putnam
• [Elecraft] Happy Easter!!   Dale Putnam
• [Elecraft] Batteries for K1.   David Quental
• [Elecraft] Batteries for K1   David Quental
• [Elecraft] WA2EWE-T6AF SK   David Quental
• [Elecraft] AGC Problem   JAMES ROGERS
• [Elecraft] Comments?   JAMES ROGERS
• [Elecraft] OT: ICE still functioning?   JAMES ROGERS
• [Elecraft] [K2] Hardened K2 for HFPack?   John Ragle
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   John Ragle
• [Elecraft] New product suggestion   John Ragle
• [Elecraft] New product suggestion   John Ragle
• [Elecraft] K3 - new product "demand"   John Ragle
• [Elecraft] K3 - new product "demand"   John Ragle
• [Elecraft] XG3 device...   John Ragle
• [Elecraft] Manual Updates   John Ragle
• [Elecraft] Info on K3 "IF OUT"   John Ragle
• [Elecraft] Info on K3 "IF OUT"   John Ragle
• [Elecraft] CME off reflector...not technical expert   John Ragle
• [Elecraft] ERR IO3 AGAIN   John Ragle
• [Elecraft] P3 external monitor...   John Ragle
• [Elecraft] KPA500 single input and output   Rajiv Dewan, N2RD
• [Elecraft] [K3] K3+P3+HRD/Logbk +CW Skimmer -How to set it up?   Mike Ransom
• [Elecraft] Need to shift 8 pole 2.1 filter?   John and Judy Raydo
• [Elecraft] ERR KEY with WINKEYER   George Rebong
• [Elecraft] KPA500   Robert Redmon
• [Elecraft] K3 synthesizer spur?   Robert Redmon
• [Elecraft] K3 and MARS use   David F. Reed
• [Elecraft] K3 and MARS use   David F. Reed
• [Elecraft] [K3] Date mode question   David F. Reed
• [Elecraft] [K3] Date mode question   David F. Reed
• [Elecraft] [K1] For Sale: K1 #589   John Reilly
• [Elecraft] KPA500   Jim Rhodes
• [Elecraft] High Power ATU's suitable for the new AMP~   Jim Rhodes
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Jim Rhodes
• [Elecraft] K3 custom extended sides   Jim Rhodes
• [Elecraft] 110 or 120 watts ??   Richard
• [Elecraft] 110/120 watts   Richard
• [Elecraft] OT trying to identify "mystery" coax cable   Ken Roberson
• [Elecraft] propagation   Ken Roberson
• [Elecraft] K3_P3_160_CW   Ken Roberson
• [Elecraft] K3_P3_160_CW   Ken Roberson
• [Elecraft] K3 50 Mhz power out   Ken Roberson
• [Elecraft] P3 and SSTV   Ken Roberson
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   David Robertson
• [Elecraft] K2: No SPOT Tone   Robin
• [Elecraft] K2: No SPOT Tone   Robin
• [Elecraft] Taxes Due   Kevin Rock
• [Elecraft] [K2] Hardened K2 for HFPack?   Kevin Rock
• [Elecraft] Taxes Due   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] KX-1 buttons   Kevin Rock
• [Elecraft] understanding screw sizes   Kevin Rock
• [Elecraft] understanding screw sizes   Kevin Rock
• [Elecraft] understanding screw sizes   Kevin Rock
• [Elecraft] understanding screw sizes   Kevin Rock
• [Elecraft] Xyl/KPA500   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for April 10th & 11th, 2011   Kevin Rock
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for April 24th & 25th, 2011   Kevin Rock
• [Elecraft] 14.316 help!   Kevin Rock
• [Elecraft] nets   Kevin Rock
• [Elecraft] Try ECN if the QRM is so bad. Re: SSB Net Frequency (14.316, etc.)   Kevin Rock
• [Elecraft] UK SSB Elecraft Net   Kevin Rock
• [Elecraft] UK SSB Elecraft Net   Kevin Rock
• [Elecraft] Fwd: [QRP-L] IHAB-4 BAlloon Launch Tomorrow   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Re k3 swr meter   Mike Rodgers
• [Elecraft] Re k3 receive audio   Mike Rodgers
• [Elecraft] Re. K3 receive audio   Mike Rodgers
• [Elecraft] Re k3 50mhz power out   Mike Rodgers
• [Elecraft] ?change net frequency?   Mike Rodgers
• [Elecraft] Hector Padron   Mike Rodgers
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Lu Romero
• [Elecraft] optimizing recorded audio   Lu Romero
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)/DXpedition   Lu Romero
• [Elecraft] Audio Processing   Luis V. Romero
• [Elecraft] KPA500 Remote   Dana Roode
• [Elecraft] Mac Grounding   Wolf E. Rose
• [Elecraft] SWL question   Ross
• [Elecraft] SWL question   Ross
• [Elecraft] Re k3 receive audio   Maarten van Rossum
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   Alexander Sack
• [Elecraft] K3 Serial port problems?   Alexander Sack
• [Elecraft] For Mac users only   Alexander Sack
• [Elecraft] [P3] External monitor option release date?   Alexander Sack
• [Elecraft] K3/100 power supply   Alexander Sack
• [Elecraft] [K3] No RSP for some K3 commands   Alexander Sack
• [Elecraft] [K3] No RSP for some K3 commands   Alexander Sack
• [Elecraft] [K3] No RSP for some K3 commands   Alexander Sack
• [Elecraft] Elecraft SSB Net results (4-17-11)   Alexander Sack
• [Elecraft] S-Meter Calibration   Alexander Sack
• [Elecraft] S-Meter Calibration   Alexander Sack
• [Elecraft] S-Meter Calibration   Alexander Sack
• [Elecraft] 14.316 help!   Alexander Sack
• [Elecraft] ?change net frequency?   Alexander Sack
• [Elecraft] Interesting   Alexander Sack
• [Elecraft] nets   Alexander Sack
• [Elecraft] P3 external monitor...   Alexander Sack
• [Elecraft] K144XV firmware   Paul Saffren
• [Elecraft] KPA500 feature suggestion - band bypass   Phil & Debbie Salas
• [Elecraft] Interface question.   Phil & Debbie Salas
• [Elecraft] KPA500 single input and output   Phil & Debbie Salas
• [Elecraft] K3 50 Mhz power out   Phil & Debbie Salas
• [Elecraft] KPA500 AUX input   Phil & Debbie Salas
• [Elecraft] 14.316 help!   John Santillo
• [Elecraft] understanding screw sizes   Paul Saville
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Terry Schieler
• [Elecraft] Alternate microphones for K3   Terry Schieler
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Terry Schieler
• [Elecraft] FW: XG3 device...   Terry Schieler
• [Elecraft] K3 - BNC switch for RX IN & AUX?   William Schneider
• [Elecraft] K3 50 Mhz power out   Merv Schweigert
• [Elecraft] KX1 30-80 meter option   Dave Sergeant
• [Elecraft] UK SSB Elecraft Net   Dave Sergeant
• [Elecraft] [K2] Hardened K2 for HFPack?   Byron Servies
• [Elecraft] [K2] Hardened K2 for HFPack?   Byron Servies
• [Elecraft] [K2] AUXBUS and 3rd party mods   Byron Servies
• [Elecraft] [K2] AUXBUS and 3rd party mods   Byron Servies
• [Elecraft] SDR IQ/IF Questions   Byron Servies
• [Elecraft] KX1 and Palm paddles   Byron Servies
• [Elecraft] KPA-500 / K3 firmware suggestion   Byron Servies
• [Elecraft] UFER Ground In House   Byron Servies
• [Elecraft] Congratulations...   Byron Servies
• [Elecraft] Mac Grounding   Byron Servies
• [Elecraft] P3 Manual Updates   Byron Servies
• [Elecraft] K2   Byron Servies
• [Elecraft] K2 Control Cable Question   Byron Servies
• [Elecraft] OT: Hi-Fi audio amplifier kit   Byron Servies
• [Elecraft] OT: ICE still functioning?   Sfbonk
• [Elecraft] K3 - Receiver desense?   Chuck Shefflette
• [Elecraft] K3 +sign in display   Jim Sheldon
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Jim Sheldon
• [Elecraft] K3EXREF   Jim Sheldon
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (4-10-11)   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (4-17-11)   Phillip Shepard
• [Elecraft] SSB net announcement   Phillip Shepard
• [Elecraft] SSB Net Frequency (14.316, etc.)   Phillip Shepard
• [Elecraft] Elecraft SSB Net Report (4/24/11)   Phillip Shepard
• [Elecraft] SSB net announcement - note frequency change   Phillip Shepard
• [Elecraft] Terrible news   Mike Short
• [Elecraft] KX1 strikes again   Monty Shultes
• [Elecraft] UK SSB Elecraft Net   Monty Shultes
• [Elecraft] ERR IO3   Monty Shultes
• [Elecraft] Yet another product idea   Ray Sills
• [Elecraft] Mac Grounding   Ray Sills
• [Elecraft] Li-ion batteries for KX1 ??   Ray Sills
• [Elecraft] New Digital Readout for W1 and W2 SWR-Wattmeters   Steve Silverman
• [Elecraft] Yaesu FL-7000   Barry Simpson
• [Elecraft] Elecraft at Dayton   Johnny Siu
• [Elecraft] KPA 500 and ATU   Johnny Siu
• [Elecraft] KPA 500 and ATU   Johnny Siu
• [Elecraft] Re： re KPA 500 and ATU Great design   Johnny Siu
• [Elecraft] High Power ATU's suitable for the new AMP~   Johnny Siu
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Johnny Siu
• [Elecraft] [K3] KIO3 serial port replacement or repair?   Johnny Siu
• [Elecraft] K3 - Value on the used market?   Johnny Siu
• [Elecraft] XG3's in Dayton?   Johnny Siu
• [Elecraft] k3 50mhz power out   Johnny Siu
• [Elecraft] For Sale: XG2, 3 Band 1-uV / 50-uV Receiver Test Oscillator (80, 40 & 20M)   Johnny Siu
• [Elecraft] XG2, 3 Band 1-uV / 50-uV Receiver Test Oscillator (80, 40 & 20M) - SOLD   Johnny Siu
• [Elecraft] OT: Hi-Fi audio amplifier kit   Johnny Siu
• [Elecraft] Re︰ OT: Hi-Fi audio amplifier kit   Johnny Siu
• [Elecraft] OT: Hi-Fi audio amplifier kit   Johnny Siu
• [Elecraft] Multi-band (Fan) Dipoles   Niel Skousen
• [Elecraft] Proposal for Mono-band Elecraft   Craig D. Smith
• [Elecraft] S meter command   Jack Smith
• [Elecraft] OT trying to identify "mystery" coax cable   Jack Smith
• [Elecraft] XG3 device...   Jack Smith
• [Elecraft] XG3 device...   Jack Smith
• [Elecraft] XG3 device...   Jack Smith
• [Elecraft] XG3 and IMD testing   Jack Smith
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Pete Smith
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   Pete Smith
• [Elecraft] [K3] K3+P3+HRD/Logbk +CW Skimmer -How to set it up?   Pete Smith
• [Elecraft] Yet another product idea   Pete Smith
• [Elecraft] K3/100 power supply   Pete Smith
• [Elecraft] Lightning protection   Pete Smith
• [Elecraft] [K3] KIO3 serial port replacement or repair?   Pete Smith
• [Elecraft] KPA500   Martin Staffa
• [Elecraft] Trying to get LP-100 PLOT to make K3 output carrier   Jim Stafford
• [Elecraft] factory built k3/100/F   Rick Stealey
• [Elecraft] OT: ICE still functioning?   Rick Stealey
• [Elecraft] Band pass filters, was ICE   Rick Stealey
• [Elecraft] Band pass filters, was ICE   Rick Stealey
• [Elecraft] Taxes Due   Mark Stennett
• [Elecraft] Change of email address   Stewart
• [Elecraft] [Elecraft K3] Frequency Calibration using Sidetone   Wes Stewart
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   Wes Stewart
• [Elecraft] New product suggestion   Wes Stewart
• [Elecraft] K3: KPA500 vs XYL   Wes Stewart
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Wes Stewart
• [Elecraft] XG3 device...   Wes Stewart
• [Elecraft] Need to shift 8 pole 2.1 filter?   Wes Stewart
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   Wes Stewart
• [Elecraft] XG3 device...   Wes Stewart
• [Elecraft] factory built k3/100/F   Wes Stewart
• [Elecraft] K3 & DXBase 2007   Wes Stewart
• [Elecraft] WA2EWE-T6AF SK   Wes Stewart
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   Wes Stewart
• [Elecraft] Problem with K3 receive audio   Tom Stone
• [Elecraft] KX1 Red Display Filter   Chuck Stover
• [Elecraft] KX1 - Power Amplifier Q6 Installation Question   Chuck Stover
• [Elecraft] KX1 Red Display Filter   Chuck Stover
• [Elecraft] KX1 - Power Amplifier Q6 Installation Question   Chuck Stover
• [Elecraft] Batteries, batteries, batteries   R. Kevin Stover
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   R. Kevin Stover
• [Elecraft] K3V - another new product speculation   R. Kevin Stover
• [Elecraft] K3V - another new product speculation   R. Kevin Stover
• [Elecraft] Yet another product idea   R. Kevin Stover
• [Elecraft] Yet another product idea   R. Kevin Stover
• [Elecraft] P3 Manual Updates   R. Kevin Stover
• [Elecraft] [K2] Kit Building Time ?   R. Kevin Stover
• [Elecraft] CQRLOG and K3   R. Kevin Stover
• [Elecraft] OT: ICE still functioning?   R. Kevin Stover
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   R. Kevin Stover
• [Elecraft] UK SSB Elecraft Net   R. Kevin Stover
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Chip Stratton
• [Elecraft] Li-ion batteries for KX1 ??   Chip Stratton
• [Elecraft] K2/100 pwr out control problem   Robert G. Strickland
• [Elecraft] Fwd: Re: K2/100 pwr out control problem   Robert G. Strickland
• [Elecraft] Fwd: Re: K2/100 pwr out control problem   Robert G. Strickland
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Samuel Strongin
• [Elecraft] OT: Hi-Fi audio amplifier kit   Samuel Strongin
• [Elecraft] [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource   Daniel Swartling
• [Elecraft] Heil IC mic   don Swetzig
• [Elecraft] Heil IC mic   don Swetzig
• [Elecraft] Batteries   Bill Swindell
• [Elecraft] K1 #2973 on the Air   TDM
• [Elecraft] K1 #2973 on the Air   TDM
• [Elecraft] VFO Encoder doesn't change frequency   TI2/NA7U
• [Elecraft] VFO Encoder doesn't change frequency   TI2/NA7U
• [Elecraft] VFO Encoder doesn't change frequency   TI2/NA7U
• [Elecraft] K2 serial interface debug   TI2/NA7U
• [Elecraft] Email Change   Chuck Teeter
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   George A. Thornton
• [Elecraft] K3EXREF   Richard Thorpe
• [Elecraft] TEST   Richard Thorpe
• [Elecraft] MAC and the K3EXREF   Richard Thorpe
• [Elecraft] K3EXREF   Richard Thorpe
• [Elecraft] K3EXREF UPDATE   Richard Thorpe
• [Elecraft] K3STFNR   Richard Thorpe
• [Elecraft] K3STFNR   Bill Tippett
• [Elecraft] A home made 10 MHz signal source for K3   Tomczyk, Wojiech
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   Tommy
• [Elecraft] Buy K3 in Europe   Adi Toplician
• [Elecraft] K3 box dimensions   Adi Toplician
• [Elecraft] WTB: K3/100   Adi Toplician
• [Elecraft] Ligntning protection   Fred Townsend
• [Elecraft] P3 Manual Updates   Fred Townsend
• [Elecraft] P3 Manual Updates   Fred Townsend
• [Elecraft] KX1 strikes again   Fred Townsend
• [Elecraft] K3 driving a screwdriver antenna   Fred Townsend
• [Elecraft] cruise line   Fred Townsend
• [Elecraft] Ligntning protection   Fred Townsend
• [Elecraft] KX1 strikes again - Cruise Ship Bootleg Operations (OT)   Fred Townsend
• [Elecraft] K3 & DXBase 2007   Fred Townsend
• [Elecraft] SSB Net Frequency (14.316, etc.)   Fred Townsend
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Phil Townsend
• [Elecraft] KPA-500 questions   Phil Townsend
• [Elecraft] Elecraft Ale   Phil Townsend
• [Elecraft] UFER Ground In House   Phil Townsend
• [Elecraft] Congratulations...   Phil Townsend
• [Elecraft] K3: KPA500 vs XYL   Phil Townsend
• [Elecraft] For Mac users only   Phil Townsend
• [Elecraft] OT: Hi-Fi audio amplifier kit   Phil Townsend
• [Elecraft] OT: Hi-Fi audio amplifier kit   Phil Townsend
• [Elecraft] Great audio Kit   Phil Townsend
• [Elecraft] K3 - NO SSB RX (Reprise)   Lee Trout
• [Elecraft] K3 - NO SSB RX (Reprise) _ IGNORE PREVIOUS POST   Lee Trout
• [Elecraft] New product suggestion   Doug Turnbull
• [Elecraft] WTB Basic K1   VA3OL
• [Elecraft] K2 - Clifton Laboratories Z10000B Buffer   VK1OO
• [Elecraft] KPA500..Now?   Jeff Cochrane - VK4BOF
• [Elecraft] K3 - Receiver desense?   Jeff Cochrane - VK4BOF
• [Elecraft] K3 - Bug in firmware found?   Jeff Cochrane - VK4BOF
• [Elecraft] K3 - Receiver desense?   Jeff Cochrane - VK4BOF
• [Elecraft] Another KPA500 on order!   Jeff Cochrane - VK4BOF
• [Elecraft] K3/100 power supply   Jeff Cochrane - VK4BOF
• [Elecraft] 14.316 help!   Jeff Cochrane - VK4BOF
• [Elecraft] SSB Net Frequency (14.316, etc.)   Jeff Cochrane - VK4BOF
• [Elecraft] K3/100 power supply   VK5ABQ
• [Elecraft] K3/100 power supply   VK5ABQ
• [Elecraft] K3/100 power supply   VK5ABQ
• [Elecraft] AM power for KPA500   Stephen Victor
• [Elecraft] K2: CAT control of K2/100 with HRD   Stephen Victor
• [Elecraft] K2: CAT control of K2/100 with HRD   Stephen Victor
• [Elecraft] K3 SSB Dead   Mike Fatchett W0MU
• [Elecraft] K3/100 power supply   Mike Fatchett W0MU
• [Elecraft] KPA500 Shipping   Mike Fatchett W0MU
• [Elecraft] KPA500 First run sold out?   Mike Fatchett W0MU
• [Elecraft] factory built k3/100/F   Mike Fatchett W0MU
• [Elecraft] factory built k3/100/F   Mike Fatchett W0MU
• [Elecraft] QRO = KPA500 and the KPAK3AUX   Mike Fatchett W0MU
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)/DXpedition version of P3   Mike Fatchett W0MU
• [Elecraft] Terrible news   Mike Fatchett W0MU
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   Mike Fatchett W0MU
• [Elecraft] UK SSB Elecraft Net [END of Thread - Royals Disc.]   Mike Fatchett W0MU
• [Elecraft] Heil IC mic   Mike Fatchett W0MU
• [Elecraft] First Elecraft Post - KPA-500   W0UCE
• [Elecraft] KPA500 Shipping   W0UCE
• [Elecraft] AGC Problem   W4CCS
• [Elecraft] [K2] Hardened K2 for HFPack?   Bill W4ZV
• [Elecraft] K3 - Bug in firmware found?   Bill W4ZV
• [Elecraft] K3 Factory Reset?   Bill W4ZV
• [Elecraft] K3/100 power supply   Bill W4ZV
• [Elecraft] [K3] KIO3 serial port replacement or repair?   Bill W4ZV
• [Elecraft] K3 filter question   Bill W4ZV
• [Elecraft] New signal generator XG3   Bill W4ZV
• [Elecraft] XG3 shipping status ?   Bill W4ZV
• [Elecraft] [K2] 60W temperature controlled iron   Bill W4ZV
• [Elecraft] XG3 shipping status - Any received?   Bill W4ZV
• [Elecraft] K3 and CW-Skimmer   Bill W4ZV
• [Elecraft] XG3 firmware load problem continued   Bill W4ZV
• [Elecraft] Possible firmware bug - Diversity receive   Bill W4ZV
• [Elecraft] K3 - BNC switch for RX IN & AUX?   Bill W4ZV
• [Elecraft] P3 and SSTV   Bill W4ZV
• [Elecraft] New XG3 f/w includes CW beacon mode   Bill W4ZV
• [Elecraft] K3STFNR   Bill W4ZV
• [Elecraft] ERR IO3 AGAIN   Bill W4ZV
• [Elecraft] [QRO] KPA500 PIN diodes / High SWR   W5UXH
• [Elecraft] [QRO] KPA500 PIN diodes / High SWR   W5UXH
• [Elecraft] K3 50 Mhz power out   Gregg W6IZT
• [Elecraft] K3 50 Mhz power out   Gregg W6IZT
• [Elecraft] [K3] Why fuse the negative lead from a battery?   W8JH
• [Elecraft] K3EXREF and Trimble Thunderbolts   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] K3EXREF and Trimble Thunderbolts   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] K3EXREF and Trimble Thunderbolts   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] SDR IQ/IF Questions   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] SO2V with WriteLog and the K3   WA6L
• [Elecraft] Li-ion batteries for KX1 ??   WA6L
• [Elecraft] New K1 Owner -- Which ATU?   Mike WA8BXN
• [Elecraft] OT trying to identify "mystery" coax cable   Mike WA8BXN
• [Elecraft] K2 + ATU + Loop antenna in the attic   Mike WA8BXN
• [Elecraft] KX1 30-80 meter option   Mike WA8BXN
• [Elecraft] Amplifier Suggestions   Mike WA8BXN
• [Elecraft] factory built k3/100/F   Mike WA8BXN
• [Elecraft] static charges   Mike WA8BXN
• [Elecraft] Odd Question [Elecraft history]   Dick Green WC1M
• [Elecraft] K1, what is wrong ?   CHARLES WHITE
• [Elecraft] New product suggestion   Steve WU9B
• [Elecraft] FS: K1FL1-2 for 20 and 40 m I think, unopened, shipped @ $ 39   Chris Wagner
• [Elecraft] [MM] XG3's in Dayton?   Dave Van Wallaghen
• [Elecraft] [MM] XG3's in Dayton?   Dave Van Wallaghen
• [Elecraft] UK SSB Elecraft Net   Dave Van Wallaghen
• [Elecraft] Grounds... I know, I know... its a Dead issue BUT... (no Pun)   Clyde Washburn
• [Elecraft] Extract TUNE state?   Clyde Washburn
• [Elecraft] Sub VFO settings   Mike Weir
• [Elecraft] [K3] s-meter data logger software available?   Richard Wheeler
• [Elecraft] [K3] s-meter data logger software available?   Richard Wheeler
• [Elecraft] Build or Service your Elecraft?   Alan D. Wilcox
• [Elecraft] K2 + ATU + Loop antenna in the attic   Alan D. Wilcox
• [Elecraft] K2 + ATU + Loop antenna in the attic   Alan D. Wilcox
• [Elecraft] [K2] Kit Building Time ?   Alan D. Wilcox
• [Elecraft] 14.316 help!   Jim Wiley
• [Elecraft] 14.316 help!   Jim Wiley
• [Elecraft] 14.316 help!   Jim Wiley
• [Elecraft] 14.316 help!   Jim Wiley
• [Elecraft] 14.316 help!   Jim Wiley
• [Elecraft] SSB Net Frequency (14.316, etc.)   Jim Wiley
• [Elecraft] K3: KPA500..Now?   Don Wilhelm
• [Elecraft] XV50 transverter CW use   Don Wilhelm
• [Elecraft] K2 - LED Diffuser Installation Question   Don Wilhelm
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Don Wilhelm
• [Elecraft] [K2] Hardened K2 for HFPack?   Don Wilhelm
• [Elecraft] [K3] Why fuse the negative lead from a battery?   Don Wilhelm
• [Elecraft] K3 and MARS use   Don Wilhelm
• [Elecraft] K2 - No CW Sidetone   Don Wilhelm
• [Elecraft] K2 - No CW Sidetone   Don Wilhelm
• [Elecraft] K60XV Low Power Issue   Don Wilhelm
• [Elecraft] K2 and data modes   Don Wilhelm
• [Elecraft] Microphone Hum - MH2 on K3   Don Wilhelm
• [Elecraft] RTTY Interface for the K2   Don Wilhelm
• [Elecraft] VFO Encoder doesn't change frequency   Don Wilhelm
• [Elecraft] [K3] Date mode question   Don Wilhelm
• [Elecraft] KX-1 buttons   Don Wilhelm
• [Elecraft] [K2] AUXBUS and 3rd party mods   Don Wilhelm
• [Elecraft] [K3] s-meter data logger software available?   Don Wilhelm
• [Elecraft] K3EXREF and Trimble Thunderbolts   Don Wilhelm
• [Elecraft] K3EXREF and Trimble Thunderbolts   Don Wilhelm
• [Elecraft] AGC Problem   Don Wilhelm
• [Elecraft] K2: KSB2 Questions   Don Wilhelm
• [Elecraft] KX1 Red Display Filter   Don Wilhelm
• [Elecraft] KX1 Red Display Filter   Don Wilhelm
• [Elecraft] KX1 - Power Amplifier Q6 Installation Question   Don Wilhelm
• [Elecraft] UFER Ground In House   Don Wilhelm
• [Elecraft] Oops K1 Dead!   Don Wilhelm
• [Elecraft] using a scope on a k2   Don Wilhelm
• [Elecraft] using a scope on a k2   Don Wilhelm
• [Elecraft] New product suggestion   Don Wilhelm
• [Elecraft] understanding screw sizes   Don Wilhelm
• [Elecraft] Proposal for Mono-band Elecraft   Don Wilhelm
• [Elecraft] 33V 1W for D19?   Don Wilhelm
• [Elecraft] 33V 1W for D19?   Don Wilhelm
• [Elecraft] understanding screw sizes   Don Wilhelm
• [Elecraft] K2: KPA100 Removal   Don Wilhelm
• [Elecraft] Re k3 receive audio   Don Wilhelm
• [Elecraft] key dot weight   Don Wilhelm
• [Elecraft] K3: is it VFO A or B   Don Wilhelm
• [Elecraft] KPA500 Assembly Manual   Don Wilhelm
• [Elecraft] K2: No SPOT Tone   Don Wilhelm
• [Elecraft] K2 + ATU + Loop antenna in the attic   Don Wilhelm
• [Elecraft] Mac Grounding   Don Wilhelm
• [Elecraft] Mac Grounding   Don Wilhelm
• [Elecraft] Groundi loops   Don Wilhelm
• [Elecraft] K3 filter question   Don Wilhelm
• [Elecraft] XG3 All-Band RF Signal Source/phase noise performance?   Don Wilhelm
• [Elecraft] k-2 atu   Don Wilhelm
• [Elecraft] Need to shift 8 pole 2.1 filter?   Don Wilhelm
• [Elecraft] Need to shift 8 pole 2.1 filter?   Don Wilhelm
• [Elecraft] Need to shift 8 pole 2.1 filter?   Don Wilhelm
• [Elecraft] Need to shift 8 pole 2.1 filter?   Don Wilhelm
• [Elecraft] K2 + ATU + Loop antenna in the attic   Don Wilhelm
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Don Wilhelm
• [Elecraft] K2 No Transmit   Don Wilhelm
• [Elecraft] Building a K2   Don Wilhelm
• [Elecraft] [K2] Control board booboo?   Don Wilhelm
• [Elecraft] [K2] Control board booboo?   Don Wilhelm
• [Elecraft] K2 serial interface debug   Don Wilhelm
• [Elecraft] K3_P3_160_CW   Don Wilhelm
• [Elecraft] [K2]Speaker Quit   Don Wilhelm
• [Elecraft] [K2]Speaker Quit   Don Wilhelm
• [Elecraft] K2: CAT control of K2/100 with HRD   Don Wilhelm
• [Elecraft] KX1 with 30/80 option - band cycling now limited to 7/10/14   Don Wilhelm
• [Elecraft] k2 read out ?   Don Wilhelm
• [Elecraft] key dot weight   Don Wilhelm
• [Elecraft] key dot weight   Don Wilhelm
• [Elecraft] What Is Default for CONFIG: FW REVS   Don Wilhelm
• [Elecraft] [K2] Kit Building Time ?   Don Wilhelm
• [Elecraft] factory built k3/100/F   Don Wilhelm
• [Elecraft] S-Meter Calibration   Don Wilhelm
• [Elecraft] S-Meter Calibration   Don Wilhelm
• [Elecraft] static charges   Don Wilhelm
• [Elecraft] KRC2 FIRMWARE FAILURE?   Don Wilhelm
• [Elecraft] optimizing recorded audio   Don Wilhelm
• [Elecraft] K2/100 pwr out control problem   Don Wilhelm
• [Elecraft] Fwd: Re: K2/100 pwr out control problem   Don Wilhelm
• [Elecraft] Fwd: Re: K2/100 pwr out control problem   Don Wilhelm
• [Elecraft] K2 Initial Test   Don Wilhelm
• [Elecraft] Recalibrating XV144 with phase lock option   Don Wilhelm
• [Elecraft] Elecraft at Raleigh NC RARSfest   Don Wilhelm
• [Elecraft] query on K3 serial application with JT65a   Don Wilhelm
• [Elecraft] K1, what is wrong ?   Don Wilhelm
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   Don Wilhelm
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   Don Wilhelm
• [Elecraft] K2: KSB2 T1/T2 Turns Ratio Question   Don Wilhelm
• [Elecraft] K2 Control Cable Question   Don Wilhelm
• [Elecraft] K2 transmit low power, high current   Don Wilhelm
• [Elecraft] Low Battery message   Don Wilhelm
• [Elecraft] ERR IO3 more!!   Don Wilhelm
• [Elecraft] Heil IC mic   Don Wilhelm
• [Elecraft] I'm a dinosaur . . .   David Windisch
• [Elecraft] K3 Factory Reset?   David Windisch
• [Elecraft] I'm a dinosaur . . .   David Windisch
• [Elecraft] KPA500   David Windisch
• [Elecraft] Relay noises??   David Windisch
• [Elecraft] Relay noises??   David Windisch
• [Elecraft] Relay noises??   David Windisch
• [Elecraft] FS: KFL3A-1.0kHz Roofing Filter   Don Wines
• [Elecraft] FS: KFL3A-1.0kHz Roofing Filter - SOLD   Don Wines
• [Elecraft] KPA500   Geoff Wolf
• [Elecraft] SDR IQ/IF Questions   Geoff Wolf
• [Elecraft] (phase signals RE: SDR IQ/IF Questions   Geoff Wolf
• [Elecraft] propagation   Geoff Wolf
• [Elecraft] SDR IQ/IF Questions   Geoffrey Wolf
• [Elecraft] SDR IQ/IF Questions   Geoffrey Wolf
• [Elecraft] K3 - ARI500 and ALS600   Craig WØLV
• [Elecraft] KPA-500 Ordered   David Yarnes
• [Elecraft] Request   David Yarnes
• [Elecraft] Amplifier Suggestions   David Yarnes
• [Elecraft] OT--Re: Odd Question [Elecraft history]   David Yarnes
• [Elecraft] AM power for KPA500   Grant Youngman
• [Elecraft] AM power for KPA500   Grant Youngman
• [Elecraft] 14.316 help!   Grant Youngman
• [Elecraft] 14.316 help!   Grant Youngman
• [Elecraft] K3 and MARS use   Matt Zilmer
• [Elecraft] K3EXREF and Trimble Thunderbolts   Matt Zilmer
• [Elecraft] understanding screw sizes   Matt Zilmer
• [Elecraft] K3 SSB Dead   Matt Zilmer
• [Elecraft] [K2] 60W temperature controlled iron; unknown brand of solder   Matt Zilmer
• [Elecraft] K3EXREF Questions   Matt Zilmer
• [Elecraft] K3EXREF   Matt Zilmer
• [Elecraft] K3/100 power supply   Matt Zilmer
• [Elecraft] Recalibrating XV144 with phase lock option   Matt Zilmer
• [Elecraft] 14.316 help!   Matt Zilmer
• [Elecraft] ERR KEY with WINKEYER   Matt Zilmer
• [Elecraft] Local Noise Problem   ab2tc
• [Elecraft] re KPA 500 and ATU   ab2tc
• [Elecraft] KPA-500 / K3 firmware suggestion   ab2tc
• [Elecraft] K3 receive audio   ab2tc
• [Elecraft] K3 receive audio   ab2tc
• [Elecraft] K3 receive audio   ab2tc
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   ab2tc
• [Elecraft] 14.316 help!   ab2tc
• [Elecraft] K3 synthesizer spur?   ab2tc
• [Elecraft] Elecraft reflector   abell
• [Elecraft] ERR IO3 more!!   adriano.perazio
• [Elecraft] KIO3 problem solved here   adriano.perazio
• [Elecraft] New K1 Owner -- Which ATU?   af6ni
• [Elecraft] Oops K1 Dead!   af6ni
• [Elecraft] [K1] For Sale: K1 #589   af6ni
• [Elecraft] [K1] For Sale: K1 #589   af6ni
• [Elecraft] Oops K1 Dead!   af6ni
• [Elecraft] 33V 1W for D19?   af6ni
• [Elecraft] 33V 1W for D19?   af6ni
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   ai6ii
• [Elecraft] [K2]- For sale or trade - KAF2   aj4tf
• [Elecraft] Vol 84, Issue 2 Battery Negative   alan
• [Elecraft] Recalibrating XV144 with phase lock option   DBellW6AQ at aol.com
• [Elecraft] Low Battery message   Georgek5kg at aol.com
• [Elecraft] re KPA 500 and ATU   N6FB at aol.com
• [Elecraft] K-Tuner recommendation   RLVZ at aol.com
• [Elecraft] Audio Processing   amfmtv at aol.com
• [Elecraft] VFO B encoder   k2zf50 at aol.com
• [Elecraft] Ligntning protection   k2zf50 at aol.com
• [Elecraft] [K2] Hardened K2 for HFPack and K3   k4tmc at aol.com
• [Elecraft] K3 custom extended sides   k4tmc at aol.com
• [Elecraft] Elecraft at Raleigh NC RARSfest   k4tmc at aol.com
• [Elecraft] RTTY Interface for the K2   sheajohnw at aol.com
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   gary bartlett
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)   gary bartlett
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)/DXpedition version of P3   gary bartlett
• [Elecraft] P3 on DXpeditions (was P3 and SSTV)/DXpedition version of P3   gary bartlett
• [Elecraft] OT: ICE still functioning?   gary bartlett
• [Elecraft] OT: ICE still functioning?   gary bartlett
• [Elecraft] Two issues with data transmission   cbscholl
• [Elecraft] Two issues with data transmission   cbscholl
• [Elecraft] Two issues with data transmission   cbscholl
• [Elecraft] Two issues with data transmission   cbscholl
• [Elecraft] CQRLOG and K3   charles
• [Elecraft] CQRLOG and K3   charles
• [Elecraft] test   charles
• [Elecraft] KPA-500 / K3 firmware suggestion   goldtr8 at charter.net
• [Elecraft] UFER Ground In House   goldtr8 at charter.net
• [Elecraft] K3EXREF and Trimble Thunderbolts   k.igor at comcast.net
• [Elecraft] K3   k.igor at comcast.net
• [Elecraft] KPA-500 / K3 firmware suggestion   n4qs at comcast.net
• [Elecraft] Alternate microphones for K3   robtk21 at comcast.net
• [Elecraft] OT: ICE still functioning?   dave
• [Elecraft] OT: ICE still functioning?   dave
• [Elecraft] [K2] Kit Building Time ?   david
• [Elecraft] [K2]- For sale or trade - KAF2   david
• [Elecraft] Very cool propagation site   donhall161
• [Elecraft] OT trying to identify "mystery" coax cable   donhall161
• [Elecraft] New product suggestion   drewko
• [Elecraft] New product suggestion   drewko
• [Elecraft] New product suggestion   drewko
• [Elecraft] New product suggestion   drewko
• [Elecraft] Amps   george fritkin
• [Elecraft] Xyl/KPA500   george fritkin
• [Elecraft] factory built k3/100/F   george fritkin
• [Elecraft] Comments?   george fritkin
• [Elecraft] K2 No Transmit   bigald18 at gmail.com
• [Elecraft] Mac Grounding   k2qi.nyc at gmail.com
• [Elecraft] Mac Grounding   k2qi.nyc at gmail.com
• [Elecraft] 2M internal transverter stability   grumss
• [Elecraft] 2M internal transverter stability   grumss
• [Elecraft] Relay noises??   grumss
• [Elecraft] Relay noises??   grumss
• [Elecraft] Thanks for the frequency locking on 2m (internal)   grumss
• [Elecraft] KPA 500 and K2...Max Output Power ?   hb9dco
• [Elecraft] K3 in combination with Alpha 9500...   hb9dco
• [Elecraft] Two issues with data transmission   ik1bxn
• [Elecraft] XG3 All-Band RF Signal Source/phase noise performance?   juergen
• [Elecraft] Fw: ESSB   riese-k3djc at juno.com
• [Elecraft] P3 Phantom signal?   k1vt
• [Elecraft] Mac Grounding   Buck - k4ia
• [Elecraft] Elecraft History   edward kacura
• [Elecraft] K3 VOX delay, BG command   kcflyers
• [Elecraft] K3 VOX delay, BG command   kcflyers
• [Elecraft] K3 VOX delay, BG command   kcflyers
• [Elecraft] Need to shift 8 pole 2.1 filter?   kcflyers
• [Elecraft] Need to shift 8 pole 2.1 filter?   kcflyers
• [Elecraft] Need to shift 8 pole 2.1 filter?   kcflyers
• [Elecraft] Need to shift 8 pole 2.1 filter?   kcflyers
• [Elecraft] Need to shift 8 pole 2.1 filter?   kcflyers
• [Elecraft] Need to shift 8 pole 2.1 filter?   kcflyers
• [Elecraft] Need to shift 8 pole 2.1 filter?   kcflyers
• [Elecraft] K1 For Sale   kk5na
• [Elecraft] K1 #2973 on the Air (Choosing the K1 or KX1)   stan levandowski
• [Elecraft] K2 + ATU + Loop antenna in the attic   stan levandowski
• [Elecraft] KPA500 Questions   r miles
• [Elecraft] Xyl/KPA500   r miles
• [Elecraft] going like hotcakes   r miles
• [Elecraft] KPAK3AUX   r miles
• [Elecraft] KAT 500   r miles
• [Elecraft] Tragedy   r miles
• [Elecraft] KPA500 RF Input   dj7mgq at muenchen-mail.de
• [Elecraft] K3 keying the KPA-500 & transverter   dj7mgq at muenchen-mail.de
• [Elecraft] ARRL FMT April 13 - 0215utc (K3EXREF)   bruce.beford at myfairpoint.net
• [Elecraft] Local Noise Problem   n5ge at n5ge.com
• [Elecraft] K3EXREF and Trimble Thunderbolts   n5ge at n5ge.com
• [Elecraft] Just ordered the KPA500   n5ge at n5ge.com
• [Elecraft] re KPA 500 and ATU   n5ge at n5ge.com
• [Elecraft] re KPA 500 and ATU   n5ge at n5ge.com
• [Elecraft] Yet another product idea   n5ge at n5ge.com
• [Elecraft] Re k3 receive audio   n5ge at n5ge.com
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   n5ge at n5ge.com
• [Elecraft] K3/100 power supply   n5ge at n5ge.com
• [Elecraft] Odd Question [Elecraft history]   n5ge at n5ge.com
• [Elecraft] K3 driving a screwdriver antenna   n5ge at n5ge.com
• [Elecraft] New signal generator XG3   n5ge at n5ge.com
• [Elecraft] question about K3 memories and VFO B   n5ge at n5ge.com
• [Elecraft] question about K3 memories and VFO B   n5ge at n5ge.com
• [Elecraft] Clarification on QRQ mode changes in recent K3 beta firmware (4.36)   n5ge at n5ge.com
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   n5ge at n5ge.com
• [Elecraft] UK SSB Elecraft Net   n5ge at n5ge.com
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   n5ge at n5ge.com
• [Elecraft] New XG3 f/w includes CW beacon mode   n6hz
• [Elecraft] [K2] Hardened K2 for HFPack?   eric norris
• [Elecraft] OT: AMERITRON AL1200 AMPLIFIER FOR SALE to buy KPA500   eric norris
• [Elecraft] Collins 30S-1 interface with K3   pcbyrne
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   pcbyrne
• [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source   pcbyrne
• [Elecraft] K3 filter question   pcbyrne
• [Elecraft] XG3 shipping status ?   pcbyrne
• [Elecraft] Microphone Hum - MH2 on K3   radiori
• [Elecraft] Microphone Hum - MH2 on K3   radiori
• [Elecraft] Elecraft SSB net announcement   phils at riousa.com
• [Elecraft] SSB Net Report for 4/3/11   phils at riousa.com
• [Elecraft] SSB net announcement   phils at riousa.com
• [Elecraft] k-500 manual   tony rowland
• [Elecraft] sea-pac convention   tony rowland
• [Elecraft] [K2] Hardened K2 for HFPack?   ac5p at sbcglobal.net
• [Elecraft] K3 custom extended sides   ac5p at sbcglobal.net
• [Elecraft] Info on K3 "IF OUT"   n1al at sonic.net
• [Elecraft] K3 - Value on the used market?   spitze1
• [Elecraft] ESSB   van
• [Elecraft] K2   alan vega
• [Elecraft] 2M internal transverter stability   vr2xmc
• [Elecraft] Hector Padron   vr2xmc
• [Elecraft] K3 VFO episode   w0mu
• [Elecraft] RS 232 Connections   w5ov at w5ov.com
• [Elecraft] RS 232 Connections   w5ov at w5ov.com
• [Elecraft] OT trying to identify "mystery" coax cable   w5ov at w5ov.com
• [Elecraft] OT trying to identify "mystery" coax cable   w5ov at w5ov.com
• [Elecraft] OT: ICE still functioning?   w5ov at w5ov.com
• [Elecraft] OT: ICE still functioning?   w5ov at w5ov.com
• [Elecraft] key dot weight   w9cf

Last message date: Sat Apr 30 22:23:03 EDT 2011
Archived on: Sat Apr 30 22:23:11 EDT 2011

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...