[Elecraft] What Is Default for CONFIG: FW REVS

[Don Wilhelm]

  That menu entry is display only, you cannot change it.  It initially 
comes up with the MCU level, then when you turn the VFO A knob you see 
the DSP level and Front Panel levels.  If you do view other than the MCU 
level, you will see that every time you re-enter the menu - UNTIL you 
power off, and then it will come back to the MCU level.  If you don't 
want to power off, just turn the VFO A knob counterclockwise until the 
MCU level re-appears.

73,
Don w3FPR

On 4/20/2011 9:28 PM, -.-. --.-N3TU -.-. --.- wrote:
> By accident I lost the default setting for CONF: FW REVS and forgot what its
> function was doing? Anyone have it so I can put it back like it was? I meant
> to turn the little vfo while in this menu but turned the bigger one.
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/What-Is-Default-for-CONFIG-FW-REVS-tp6292964p6292964.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>