[Elecraft] Two issues with data transmission

[cbscholl]

Thanks for all your suggestions. As per one suggestion I unplugged the PTT
from the Signalink and let the program key the radio and that solved the
problem of the transmitter hanging.
As to output, I checked the cable from the Signalink and I was getting audio
from it. I plugged back in and turned up the TX level on the Signalink all
the way all the way and out put appeared. I ended up turning it down quite a
bit but it is working now. I am not sure whether the TX on the Signalink had
been turned down too far or the connector was not plugged in all the way,
but I am now functioning. I appreciate all of the responses. 73 Barney K3LA

--
View this message in context: http://elecraft.365791.n2.nabble.com/Two-issues-with-data-transmission-tp6300401p6301910.html
Sent from the Elecraft mailing list archive at Nabble.com.