[Elecraft] [K3] K3+P3+HRD/Logbk +CW Skimmer -How to set it up?

[Pete Smith]

Another solution, particular given your antenna restrictions, is to 
connect to the Reverse Beacon Network's telnet node and then tell the 
node to filter out all spots except those in your immediate area - 
depending on where you are there is probably a Reverse Beacon nearby.
Try telnet.reversebeacon.net port 7000 or arcluster.reversebeacon.net 
port 7000, depending on whether you are more comfortable with DXSpider 
or ARCluster filter commands.  More info at http://reversebeacon.net

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000



On 4/6/2011 11:21 PM, Mike Ransom wrote:
> Now that my K-line station (K3-P3-KPA500) is coming together I have a question
> about setting up CW Skimmer. I am running HRD -LogbookV5 and would like run CW
> Skimmer to the HRD telnet connection, so the spots come from my own equipment
> rather than hams out of my listening area. I am limited to one antenna due to a
> small lot size and currently I don't have the second receiver in the K3. Even if
> I get the KRX3, I am not sure how I would I be able to connect the P3 and run
> the skimmer program.
>
>   
> What am I missing here? Any help or a point in the right direction would be
> appreciated.
>   
> ..mike AI6II
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>