[Elecraft] K3/100 power supply

[Gary Gregory]

Shane,

I use the PowerWerX 13.8vdc/230VAC ( I have two of them) and no issues at
all.

They have a terminal at the rear as well as 2 each Anderson plugs on the
front.

Fan is silent, small footprint, metal enclosure.

Model SS-30DV

73's
Gary

On 13 April 2011 01:02, Bill W4ZV <btippett at alum.mit.edu> wrote:

>
> VK5ABQ wrote:
> >
> > 1. The LCL300PS12 can provide 25A and has an adjustable output range of
> > 11.0 to 13.0V. Is this suitable for the K3/100? XP Power’s 12.5 to 14.5V
> > model isn’t available here.
> >
>
> If you operate SSB at full power, I'd recommend at least 13.8V and
> preferably higher.  The K3 is specified up to 15V and exhibits better TX
> IMD
> performance at higher voltages.  I set my Astron RS-35M for 14.5V at the K3
> terminals.
>
> 73,  Bill
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-100-power-supply-tp6264879p6265496.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 

*VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679, KPA-500 #018
Living the dream!!!*