[Elecraft] High Power ATU's suitable for the new AMP~

[Jim Rhodes]

How does it work on 6 meters?

On Tue, Apr 12, 2011 at 3:08 PM, William Levy <wglevy at gmail.com> wrote:

> Gents,
>
> I have used this SGC-235 500 watt capacity automatic ATU for more than 5
> years. It is fed by a small Icom and the SGC cube amp in the back of my
> Landcruiser. I run an ex military whip of about 12 feet, also the normal
> 102
> inch whip. I have used this ATU to feed dipoles on poles, to feed 40 foot
> verticals and also long wires. It has done everything always without a
> complaint.
>
> If you demand Elecraft re-invent the wheel than perhaps they will. However
> it is certainly not necessary for them to do so. This ATU is all you need
> no
> matter what you want to feed and it will handle the new amp.
>
> I will prove that as soon as my new amp arrives. But keep in mind those of
> you with little experience, 500 watts out of 1 amp is no different than 500
> watts out of another.  You can also control the SG235 remotely by sending
> 12
> volts up the coax to it and they have the small little isolaters to help
> with that.
>
> Have a look and lets put this thread to rest. 73, N2WL  Bill
>
>
>
> http://www.sgcworld.com/235ProductPage.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Jim K0XU