[Elecraft] K3 SSB Dead

[Matt Zilmer]

Might also want to try Line In as a source to see if it works.
This might isolate the mic itself or the mic input circuit as the
problem.

matt W6NIA

On Wed, 13 Apr 2011 08:57:13 -0700, you wrote:

>Hi Roger,
>
>What microphone are you using? If it is a MH2, it requires Bias to be 
>turned on in the K3 menu.
>
>Also, what are your mic gain and compression settings?
>
>You can also switch the source for K3 mic audio between the front panel 
>and the rear panel in the K3 menu.
>
>73, Eric   WA6HHQ
>---
>www.elecraft.com
>
>On 4/13/2011 8:50 AM, Roger Huntley wrote:
>> My K3 does not work on SSB.  All other modes work just fine.  I downloaded
>> latest firmware thinking it might help but with the mic connected to front
>> jack and/or a headset connected to rear jack neither one of them work.  With
>> key on mic it does transmit but no audio comes through. Any ideas before I
>> ship it back?
>>
>> Thanks,
>>
>> Roger, W7vV
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html