[Elecraft] RTTY Interface for the K2

[Tony Estep]

You're right, Don, as always. With my K2 I used a Signalink interface and
did the transmit switching via its built-in vox, similar to Skip Teller's
scheme. But I still used Mixw, which is just as cool with the K2 as it is
with the K3.


On Sun, Apr 3, 2011 at 9:45 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

>  Tony,
>
> The original question was about the K2, not the K3.  With the K3, the
> isolation interface is built-in, not so with the K2.
>
>
>