[Elecraft] K3 50 Mhz power out

[Merv Schweigert]

I think what he is referring to is the power control will only go to
106 watts on 6 meters,  while on all other bands it goes to 110
watts,   Try turning the power up (no transmit needed) on
6 meters and see what is displayed.  Mine says 106 watts,
all other bands says 110 watts.  Newest firmware installed.
Merv K9FD/KH6
> Max power out of the K3 has been 110 watts for quite awhile (firmware
> defined).  Unless you have an extremely accurate wattmeter (better than
> about +/- 3.6%), sounds like you're good.
>
> Phil - AD5X
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>