[Elecraft] K3 VOX delay, BG command

[Wayne Burdick]

Hi John,

There's a new field-test firmware release that includes an updated BG  
command. In transmit mode, BG now returns 00 - 12 (PWR) or 00 - 07  
(ALC) depending on the METER selection.

A VOX set command is on my short list.

73,
Wayne
N6KR


On Apr 4, 2011, at 6:13 AM, kcflyers wrote:

> I have been using my K3 remotely for several months now.  Two requests
> regarding remote commands.
>
> (1) There is no VOX delay command.  Using Vox remotely, what is good  
> for
> normal QSO talking is too slow for DX or Contesting.  Would really  
> like a
> software command to be able to change delay.
>
> (2) BG command does not work on transmit.  Thus no bargraph  
> indication on
> transmit.  Programmer's guide says this should indicate Power Output  
> or ALC.
> Does neither.  Needs fixing.
>
> These may seem to be minor software problems, but they definitely  
> affect the
> easy of remote operation of the K3.
>
> John, KØIZ
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-VOX-delay-BG-command-tp6238497p6238497.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html