[Elecraft] AGC Problem

[Don Wilhelm]

  Does that happen with the "bare" K3, or is there a computer control 
application involved to further "muddy the waters".

If it happens with nothing connected to the K3 except a mic, key, power 
and antenna, then I would suggest that you contact 
K3support at elecraft.com.  If there are other devices involved, then 
eliminate them one by one to see if the problem is resolved with the 
deletion of that device.

73,
Don W3FPR

On 4/5/2011 8:08 PM, W4CCS wrote:
> Recently I have been experiencing a problem with the AGC on my K3
> (2090). When I return to receive from transmit, the AGC is turned off
> and the speaker system is overloaded. This happens on about every 10 to
> 15 transmissions. It has happened with the K3 sitting on the desk in
> receive.. This is very annoying and very hard on the ears..!!
>
> I'm running firmware versions:
>
> MCU: 04.25
>
> DSP1&2: 2.71
>
> de W4CCS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>