[Elecraft] XG3 device...

[Robert Friess]

All XG3 amplitude references refer to the amplitude of the fundamental
frequency component only.

Bob, N6CM

On Thu, Apr 14, 2011 at 9:09 AM, Tony Estep <esteptony at gmail.com> wrote:

> On Thu, Apr 14, 2011 at 10:32 AM, Ron D'Eau Claire <ron at cobi.biz> wrote:
>
> > A square wave's frequency....
> >
> >
> >
> Ron, I think John is aksing about the calibrated power (John, correct me
> if I'm mis-stating here). If there are infinite harmonics each
> with amplitude = 1/N, then 1/2 of the total energy will be at the
> fundamental freqency, and 1/2 will be in the sum of all the higher
> harmonics.  So if you say that the output is, say, 1 mW and the frequency
> is
> 1 MHz, does that mean that there is 1mW of output at 1 MHz and another 1 mW
> of output in the harmonics? or what?
>
> Tony KT0NY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>