[Elecraft] Need to shift 8 pole 2.1 filter?

[Wes Stewart]

I don't know a thing about TRX Manager, but when operating locally, for voice modes I default to Lo-Hi cut on the bandwidth settings and Shift-Width for CW and Data modes.

--- On Thu, 4/14/11, kcflyers <kcflyers at yahoo.com> wrote:

> I am running K3 remotely using TRX
> Manager.  When in the 2.8 filter the shift
> display is centered on the TRX display, and display below
> shows 2800.  When
> switching to 2.1, the shift display is still
> centered.  I did notice that
> the width control slider moves up (by itself), and width
> display at bottom
> goes from 2800 to 2100.   I did not manually
> change the width control.   So
> in this situation, I have to move the shift slider to
> offset from being
> centered.  This is an inconvenience when switching
> back and forth between
> filters.
> 
> I am not at my K3, so can't check what happens when I just
> change filters,
> whether same as above (requiring shift), or not.
>