[Elecraft] RS 232 Connections

[w5ov at w5ov.com]

Exactly.

If his does not work with the K3 while still connected via the P3, he must
have the old firmware in his P3.


> You don't need to do anything to send K3 commands with the P3 still
> connected.  The P3 relays the K3 commands straight on through.  K3
> Utility "thinks" it is connected directly to the K3.
>
> You may be thinking of older versions of P3 firmware where you had to
> turn off the P3 when downloading K3 firmware.  But that was fixed way
> back in version 00.37 (September 2010).
>
> Alan N1AL
>
>
> On Wed, 2011-04-13 at 11:48 -0400, w5ov at w5ov.com wrote:
>> Upgrade the firmware in your P3 which will allow you to access either
>> without changing connections.
>>
>> > Have a K3 & KUSB with the P3.  It appears that if I want to connect to
>> > my PC and run the K3 utility I must disconnect the P3 during this
>> > process. Curious if there are other ways to enable both.
>> >
>> > TIA  Dick
>> >
>> > ______________________________________________________________
>> > Elecraft mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Elecraft at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> >
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>