[Elecraft] Info on K3 "IF OUT"

[John Ragle]

In part, my reason for asking is the following...

I am feeding the K3 IF Out into a fast ADC at 192 kHz, followed by a 
Winloe detector, etc. for panoramic viewing, but despite the 192 kHz 
sampling frequency I am only getting about 44 kHz TOTAL spectral width. 
Thus, there seems to be a front-end bandwidth of about +/- ~25 kHz. Is 
this true? Or am I doing something wrong?

The P3 comes up with a TOTAL spectral width of ~200 kHz. Where does it 
pick its signal from?

John Ragle -- W1ZI

=====

On 4/23/2011 11:44 AM, n1al at sonic.net wrote:
> It is a wideband, low-level signal.  The bandwidth is just limited by the
> front-end filters in the K3.  The level is about 7 dB less than the level
> at the K3 antenna input (preamp and attenuator off).  On older K3s that
> don't have the IF OUT modification the level is less than that, by about
> 8-10 dB as I recall.
>
> Alan  N1AL
>
>
>> Aside from the frequency, I can find nothing about the characteristics
>> of the K3 "IF OUT" feed. Could some kind person provide info about
>> bandwidth, levels, etc...?
>>
>> John Ragle -- W1ZI
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>
>
>
>
>