[Elecraft] K2 Control Cable Question

[Ross Primrose N4RP]

I've had good luck with this free one: 
http://www.curioustech.net/xport.html

One caveat, doesn't work with 64-bit windows.

73, Ross N4RP

On 4/27/2011 1:56 PM, Byron Servies wrote:
> Hi,
>
> I have no idea if this works or is even still in development, but a
> quick search for "virtual com port" led me to:
>
> http://com0com.sourceforge.net/
>
> which includes hub4com, a way to have multiple applications access a
> single serial port.
>
> I don't have a need for this just now, so I am not brave enough to try it,
>
> On Wed, Apr 27, 2011 at 10:49 AM, Jim Campbell<jim at w4bqp.net>  wrote:
>> I'm afraid Iain Is correct. I installed LP-Bridge and found that it's
>> input port is permanently set to 38400 bps whereas the K2 wants to play
>> at 4800.
>


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”