[Elecraft] K3: is it VFO A or B

[Bob Naumann]

VFO A is always primary. It is at the top of the display and as far as I
know, always shows your receive frequency.

When you do VFOA/VFOB you are swapping the contents of the VFOs - not
swapping their locations - in other words, you're not making VFO B primary -
you're exchanging the contents of the two VFOs.

If you have the VFOB knob showing the contents of VFOB, you then see both.
VFO A at the top, VFO B on the bottom.

This seems very clear to me - and yes, it's different from some other
manufacturers, but so what?

73,

Bob W5OV

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of DL5OCD
Sent: Monday, April 11, 2011 9:21 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3: is it VFO A or B

Hmmmm......

i have no SubRX. And the small "VFO knob" depends on the mode i selcted with
the DISP button.
Again: how do i see (like easily indicated on my K2`s and the Yeacomwoods)
if i am on VFO a or B ?
I would expect that the small arrow on the right side would stay at the
selected VFO, but it doesn`t.


73
Michael

--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-is-it-VFO-A-or-B-tp6247010p6261624.h
tml
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html