[Elecraft] K2: CAT control of K2/100 with HRD

[Stephen Victor]

Hi Ken
I'm sorry.  I meant 4800.  And the HRD does match.  
Also- am using Windows XP, with a computer that successfully used HRD with a 
different radio.
But this time I installed the newest build of HRD.
Thanks and 73
Steve WA2DTW




________________________________
From: Ken Wagner K3IU <kenk3iu at cox.net>
To: Stephen Victor <victorsj at yahoo.com>
Sent: Mon, April 18, 2011 12:47:56 PM
Subject: Re: [Elecraft] K2: CAT control of K2/100 with HRD

Hi Steve:
I think you have the baud rate wrong. The K2 is 4800, (not 48,000) if I remember 
correctly, and HRD must match.
73,
Ken K3IU  K2 #5413


On 4/18/2011 12:14 PM, Stephen Victor wrote: 
Hi My K2/100 has been functioning well, and I am now trying for the first time 
to  use the connection on the 100W amplifier unit for CAT control with Ham Radio  
Deluxe.   The K2 is serial number 6679, so apparently no modifications are  
needed.  The side-tone works.  I fashioned the cable as per instructions (and  
there is continuity where there should be), turned on the "port" function on the  
K2, set the baud rate on HRD to 48,000.   However, the HRD is unable to read the  
frequency.   Am I missing something obvious?  Is some driver needed, or some 
further  modification to the K2 or amplifier circuitry?  Thanks and 73 Steve 
WA2DTW ______________________________________________________________ Elecraft 
mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: 
http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft at mailman.qth.net  This 
list hosted by: http://www.qsl.net Please help support this email list: 
http://www.qsl.net/donate.html