[Elecraft] [K3] Sudden loss of output power

[Tom Boucher]

Mike,

This was one of the many different symptoms I had as a result of bad contacts on the 4 front panel connectors. Remove the front panel, not forgetting to take out that 3D block screw on the left hand side, give the connectors a good clean and apply a thin film of 'Contralube' or some similar electrical lubricant and replace.

73
Tom G3OLB


<My K3 has recently developed a fault that causes a sudden loss of
<output power. ..............Mike, M0PRL / VP8DMH