[Elecraft] Amplifier Suggestions

[Lou Kolb]

This is a great suggestion.  Once you have the 100 watt amp that is meant 
for the K3, you can always set your power for anything between 10 and 100 
watts and you'll use no extra space on the desk, if that matters.  It would 
in my shack.  73,  Lou WA3MIX
----- Original Message ----- 
From: "Mike WA8BXN" <hubby2k at hotmail.com>
To: <elecraft at mailman.qth.net>; "Frank MacDonell" <kd8fip at gmail.com>
Sent: Saturday, April 16, 2011 10:48 AM
Subject: Re: [Elecraft] Amplifier Suggestions


>I would add the Elecraft amplifier designed for the K3 to upgrade to a
> K3/100. There aren't a lot of choices for amps that are designed for 10
> watts in. You could go with any linear designed for higher power and just
> get less out driving with 10 watts.
>
> 73 - Mike WA8BXN
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html