[Elecraft] K2: No SPOT Tone

[Don Wilhelm]

  Robin,

If you have the KIO2 installed, do you also have no data connection?
That is a sure sign that you have inadvertently changed the sidetone 
source in the menu.

Try getting it back in the menu.  First go to the STL menu, and set the 
parameter back to where you normally had it (try 25 to 30 if you don't 
remember).  Then tap the DISPLAY button to toggle the sidetone source 
(try tapping it several times if you do not hear the sidetone).

If that does not fix it, then you may have a bad connection somewhere in 
the sidetone signal path on the Control Board.

73,
Don W3FPR



On 4/11/2011 5:49 PM, Robin wrote:
> Hi,
>
> I am battling to hear the SPOT tone on my K2. I know it is there because if
> I set St L to 250 then I can just hear it, but it shouldn't be that soft and
> should easily be audible at a much lower value. Any suggestions what I am
> missing here?
>
> thanks
> Robin
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K2-No-SPOT-Tone-tp6263067p6263067.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>