[Elecraft] K2 - No CW Sidetone

[Don Wilhelm]

  Tom,

Yes, there is a menu item - it is the sidetone source.
Enter the menu for STL, then set the parameter for something loud enough 
for you to hear - use 25 if you have no other idea.  Then while still in 
the menu edit, tap the DISPLAY button to toggle between the 2 sidetone 
sources (it sometimes takes multiple taps).  Stop when you hear sidetone 
and tap the menu button twice to exit the menu.

If you frequently change the sidetone level, there is a chance of 
accidently tapping the Display button while still editing the sidetone 
level.  When zero beating, I recommend you change the AF gain to make 
the signal about the same amplitude as the signal rather than changing 
the sidetone level - it is faster and less chance of an error.

73,
Don W3FPR


On 4/2/2011 5:15 PM, Tom McCulloch wrote:
> Hi,
>    I seemed to have lost my CW sidetone (and the "spot" function as well)
> on my K2 - s/n 1103.  I'm getting audio from the receiver out of the
> speakers and the transmitter seems to be transmitting.
>
> Any ideas?  is there a menu setting I may have accidentally turned off?
>
> Tnx
> tom
> WB2QDG
> K2 1103
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>