[Elecraft] KPA500 feature suggestion - band bypass

[Eric Swartz - WA6HHQ, Elecraft]

I just confirmed that there is -no- limitation when using the K3 at 100W 
with KAT3 to work into a high SWR load through the KPA500 (in stand by 
pass-through mode). If the KAT3 tunes it, you will be well within the 
safe range for everyhting.  :-)

Also, there is a KAT500 in the works for release later this summer if 
all goes to plan. Stay tuned!

73, Eric   WA6HHQ
----