May 2010 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat May 1 02:34:37 EDT 2010
Ending: Mon May 31 23:09:47 EDT 2010
Messages: 1350

• [Elecraft] Trade 2.1 kHz Filter   n4cc at cableone.net
• [Elecraft] K3 Power Out   Richard Ferch
• [Elecraft] Trade 2.1 kHz Filter - try again   n4cc at cableone.net
• [Elecraft] Trade 2.1 kHz Filter - plain text   n4cc at cableone.net
• [Elecraft] Mac OS X and K3 Utility Opinions?   N1JM
• [Elecraft] K3 Power Out   Don Wilhelm
• [Elecraft] Mac OS X and K3 Utility Opinions?   lstavenhagen
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   Bill VanAlstyne W5WVO
• [Elecraft] Mac OS X and K3 Utility Opinions?   N1JM
• [Elecraft] CW/CW-REV config option   Rich - K1HTV
• [Elecraft] K2 6870 is on the air   Paul Huff
• [Elecraft] Mac OS X and K3 Utility Opinions?   lstavenhagen
• [Elecraft] CW/CW-REV config option   Joe Subich, W4TV
• [Elecraft] FS: K3/100 w/KXV3 $1800 Shipped ConUs.   Don Rasmussen
• [Elecraft] CW/CW-REV config option   Guy Olinger K2AV
• [Elecraft] OT -SOTA   gary bartlett
• [Elecraft] Mac OS X and K3 Utility Opinions?   Peter Wollan
• [Elecraft] Mac OS X and K3 Utility Opinions?   John Merrill
• [Elecraft] Mac OS X and K3 Utility Opinions?   David Ferrington, M0XDF
• [Elecraft] Mac OS X and K3 Utility Opinions?   Rick Prather
• [Elecraft] Mac OS X and K3 Utility Opinions?   Ross Primrose N4RP
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] K3 Loss of Transmit Power after the KRX3 installation   David S. Mulvey
• [Elecraft] Sold - FS: K3/100 w/KXV3 $1800   Don Rasmussen
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] knobs   eric manning
• [Elecraft] K3 QSK thumps   eric manning
• [Elecraft] Elecraft SSB Net Announcement   Philippe Trottet
• [Elecraft] knobs   David Pratt
• [Elecraft] Mac OS X and K3 Utility Opinions?   Ian Maude
• [Elecraft] Mac OS X and K3 Utility Opinions?   David Ferrington, M0XDF
• [Elecraft] Mac OS X and K3 Utility Opinions?   David Ferrington, M0XDF
• [Elecraft] Strange problem last night in my K3   James Sarte
• [Elecraft] knobs   James Sarte
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   Alan D. Wilcox
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   callen1155
• [Elecraft] K3 Auto CW Speed   Val
• [Elecraft] knobs   Jim Miller KG0KP
• [Elecraft] knobs   Doug Turnbull
• [Elecraft] K2/Indiana QSO Party   Ivin Flint
• [Elecraft] knobs   Gary Gregory
• [Elecraft] K3 Auto CW Speed   DK4XL
• [Elecraft] K3 Auto CW Speed   lstavenhagen
• [Elecraft] K2/Indiana QSO Party   lstavenhagen
• [Elecraft] K3 Auto CW Speed   Phil Hystad
• [Elecraft] K3 Auto CW Speed   Ken Kopp
• [Elecraft] K3 Auto CW Speed   Phil & Debbie Salas
• [Elecraft] K3 Auto CW Speed   lstavenhagen
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   Bill VanAlstyne W5WVO
• [Elecraft] K3 Auto CW Speed   WILLIS COOKE
• [Elecraft] knobs   Rick Prather
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   callen1155
• [Elecraft] K3 Auto CW Speed   Rick Prather
• [Elecraft] K3 Auto CW Speed   The Smiths
• [Elecraft] K3 Auto CW Speed   Kok Chen
• [Elecraft] K3 Auto CW Speed   Rick Prather
• [Elecraft] [K3] Bad COM port made K3 not work   Carl Clawson
• [Elecraft] K2 RS-232 Interface   Elliott Lawrence
• [Elecraft] [K3] Bad COM port made K3 not work   Tom W8JI
• [Elecraft] P3 Questions concerning measurement   Fred Atchley
• [Elecraft] Help needed on K2/100   RONALD R FREEMAN
• [Elecraft] Help needed on K2/100   Mark Bayern
• [Elecraft] Help needed on K2/100   Don Wilhelm
• [Elecraft] K2 PTT problem   RONALD R FREEMAN
• [Elecraft] K3 Auto CW Speed   Ralph Parker
• [Elecraft] ECN/20 relay requester?   Kevin Rock
• [Elecraft] K2 PTT problem   Don Wilhelm
• [Elecraft] [K3] Bad COM port made K3 not work   Bill W4ZV
• [Elecraft] P3 Questions concerning measurement   Alan Bloom
• [Elecraft] K3 Auto CW Speed   Dave Agsten
• [Elecraft] Elecraft CW Net Report for May 2nd & 3rd, 2010   Kevin Rock
• [Elecraft] P3 Questions concerning measurement   juergen
• [Elecraft] P3 Questions concerning measurement   Geoffrey Mackenzie-Kennedy
• [Elecraft] k3:TX Monitor-some odd sound -beta?   juergen
• [Elecraft] k3:TX Monitor-some odd sound -beta?   John Lemay
• [Elecraft] k3:TX Monitor-some odd sound -beta?   T Gahagan
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   drewko
• [Elecraft] k3:TX Monitor-some odd sound -beta?   T Gahagan
• [Elecraft] K3 Auto CW Speed   lstavenhagen
• [Elecraft] [K3] Bad COM port made K3 not work   lstavenhagen
• [Elecraft] k3:TX Monitor-some odd sound -beta?   Bill W4ZV
• [Elecraft] P3 Questions concerning measurement   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] k3:TX Monitor-some odd sound -beta?   WB8ENE
• [Elecraft] FOR SALE: KX1   Elliott Lawrence
• [Elecraft] XG2 - Trim Frequency?   Brian - N5BCN
• [Elecraft] Elecraft SSB Net for May 2nd   Roger Stein
• [Elecraft] K3 bandwidth for digital modes   Joe Subich, W4TV
• [Elecraft] k3:TX Monitor-some odd sound -beta?   Don Cunningham
• [Elecraft] Elecraft SSB Net for May 2nd   Tom W8JI
• [Elecraft] Elecraft SSB Net for May 2nd   Roger Stein
• [Elecraft] [K3] Bad COM port made K3 not work   Jim Brown
• [Elecraft] Elecraft SSB Net for May 2nd   Paul Christensen
• [Elecraft] XG2 - Trim Frequency?   Don Wilhelm
• [Elecraft] K2 RS-232 Interface   Jim Brown
• [Elecraft] [K3] Bad COM port made K3 not work   Edward R Cole
• [Elecraft] k3:TX Monitor-some odd sound -beta?   Guy Olinger K2AV
• [Elecraft] k3:TX Monitor-some odd sound -beta?   pd0psb
• [Elecraft] (no subject)   allen rodgers
• [Elecraft] k3:TX Monitor-some odd sound -beta?   WB8ENE
• [Elecraft] (no subject)   WILLIS COOKE
• [Elecraft] (no subject)   Ken Kopp
• [Elecraft] k3:TX Monitor-some odd sound -beta?   Don Wilhelm
• [Elecraft] k3:TX Monitor-some odd sound -beta?   Jim Brown
• [Elecraft] P3 Questions concerning measurement   Alan Bloom
• [Elecraft] k3:TX Monitor-some odd sound -beta?   Don Wilhelm
• [Elecraft] k3:TX Monitor-some odd sound -beta?   Jim Brown
• [Elecraft] (no subject)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] (no subject)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K3] Bad COM port made K3 not work   David Gilbert
• [Elecraft] [K3] Bad COM port made K3 not work   Guy Olinger K2AV
• [Elecraft] (no subject)   Bill W4ZV
• [Elecraft] [K3] Bad COM port made K3 not work   Carl Clawson
• [Elecraft] K2 RS-232 Interface   Joe Subich, W4TV
• [Elecraft] K2 RS-232 Interface   Phil Kane
• [Elecraft] K2 RS-232 Interface   Don Wilhelm
• [Elecraft] [K3] Bad COM port made K3 not work   Jan Erik Holm
• [Elecraft] k3:TX Monitor-some odd sound -beta?   David Cutter
• [Elecraft] Strange problem last night in my K3   Ramiro Aceves
• [Elecraft] [K3] Bad COM port made K3 not work   Tom W8JI
• [Elecraft] k3:TX Monitor-some odd sound -beta?   juergen
• [Elecraft] N2CQ QRP Contest Calendar: May 5 - June 8, 2010   Ken Newman
• [Elecraft] K3 NR in deversity mode   Mike Scott
• [Elecraft] K3 NR in deversity mode   Guy Olinger K2AV
• [Elecraft] [K3] Bad COM port made K3 not work   Carl Clawson
• [Elecraft] [K3] Bad COM port made K3 not work   Jan Erik Holm
• [Elecraft] [K3] Bad COM port made K3 not work   Jan Erik Holm
• [Elecraft] [K3] Bad COM port made K3 not work   Duncan Carter
• [Elecraft] [K3] Bad COM port made K3 not work   Jan Erik Holm
• [Elecraft] Inertia   Grant Youngman
• [Elecraft] TEST...IGNORE   Ken
• [Elecraft] frederic mogno   John Frerichs
• [Elecraft] F/S: KDSP2 Assembled Board & Manual   Jim bennett / W6JHB
• [Elecraft] F/S: KDSP2 Assembled Board & Manual   Gary Hvizdak
• [Elecraft] F/S: KDSP2 Assembled Board & Manual   Jim bennett / W6JHB
• [Elecraft] F/S: KDSP2 Assembled Board & Manual   Gary Hvizdak
• [Elecraft] K3 - SWR on Tx Gain Calibration   Geoffrey Downs
• [Elecraft] K3 - SWR on Tx Gain Calibration   lstavenhagen
• [Elecraft] F/S: KDSP2 Assembled Board & Manual   Jim Bennett / W6JHB
• [Elecraft] K3 - SWR on Tx Gain Calibration   Mike
• [Elecraft] K3 - SWR on Tx Gain Calibration   Bill VanAlstyne W5WVO
• [Elecraft] cw 'clicking' ??   callen1155
• [Elecraft] cw 'clicking' ??   Steve Ellington
• [Elecraft] cw 'clicking' ??   Guy Olinger K2AV
• [Elecraft] cw 'clicking' ??   Bill VanAlstyne W5WVO
• [Elecraft] F/S: KDSP2 Assembled Board & Manual   Alan D. Wilcox
• [Elecraft] cw 'clicking' ??   Jim Brown
• [Elecraft] K3 - SWR on Tx Gain Calibration   Bob Cunnings
• [Elecraft] F/S: KDSP2 Assembled Board & Manual   Jim Bennett / W6JHB
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   David Cutter
• [Elecraft] K3 SWR reading at low power   Ramiro Aceves
• [Elecraft] cw 'clicking' ??   juergen
• [Elecraft] cw 'clicking' ??   Paul Christensen
• [Elecraft] K3 SWR reading at low power   Geoffrey Downs
• [Elecraft] K3 - SWR on Tx Gain Calibration   Geoffrey Downs
• [Elecraft] K3 - SWR on Tx Gain Calibration   lstavenhagen
• [Elecraft] cw 'clicking' ??   Geoffrey Mackenzie-Kennedy
• [Elecraft] cw 'clicking' ??   Guy Olinger K2AV
• [Elecraft] K3 - SWR on Tx Gain Calibration   Bill VanAlstyne W5WVO
• [Elecraft] cw 'clicking' ??   Radio Amateur N5GE
• [Elecraft] cw 'clicking' ??   Wes Stewart
• [Elecraft] cw 'clicking' ??   Tom W8JI
• [Elecraft] Thursday 'coon hunt announcement   Kevin Rock
• [Elecraft] cw 'clicking' ??   Brian Alsop
• [Elecraft] K3 swr readings on 10m   elecraft at g4fre.com
• [Elecraft] cw 'clicking' ?? [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] cw 'clicking' ??   Jim Brown
• [Elecraft] K3 question -- Transmitting (SSB) with power set to 0.0 watts -- any risk?   Mitch Mitchell
• [Elecraft] 144 module for K3   Phil LaMarche
• [Elecraft] [K2] test problem with VFO and no 7000 kHz signal heard   Warren Holybee
• [Elecraft] 144 module for K3   Radio Amateur N5GE
• [Elecraft] Error message after KXV3A Install ?   Garry Brisbane
• [Elecraft] K3 SWR reading at low power   Ramiro Aceves
• [Elecraft] [K2] test problem with VFO and no 7000 kHz signal heard   Don Wilhelm
• [Elecraft] [K2] VCO Test   Clark Ward Jr
• [Elecraft] k3 utility problem   Gary Lee
• [Elecraft] further to k3 util problem   Gary Lee
• [Elecraft] [K2] VCO Test   Don Wilhelm
• [Elecraft] k3 utility problem   Don Wilhelm
• [Elecraft] [K2] VCO Test   Fred Jensen
• [Elecraft] k3 utility problem   Dick Dievendorff
• [Elecraft] K3 6M SWR   wb6rse1 at mac.com
• [Elecraft] K3 6M SWR   Don Wilhelm
• [Elecraft] [OT] New Vibroplex   lstavenhagen
• [Elecraft] K3 rig control program   Larry K1UO
• [Elecraft] [OT] New Vibroplex   Phil Hystad
• [Elecraft] K3 serial numbers   George Dubovsky
• [Elecraft] Cleaning out the radio shack   KARL MARDERIAN
• [Elecraft] [K3   Will, AI4VE
• [Elecraft] [K3] Popping on left channel with AFX on   Will, AI4VE
• [Elecraft] [K3] Popping on left channel with AFX on   Lyle Johnson
• [Elecraft] K1 - Moving the range of 40 meters from 7.100 up to 7.125?   K Price
• [Elecraft] [K3] Popping on left channel with AFX on   Will - AI4VE
• [Elecraft] UK Elecraft Net   Ian Maude
• [Elecraft] dead K2   worsr
• [Elecraft] UK Elecraft Net   Ian White GM3SEK
• [Elecraft] dead K2   Don Wilhelm
• [Elecraft] K3 serial numbers   Jeff Cochrane - VK4BOF
• [Elecraft] dead K2   Geoffrey Mackenzie-Kennedy
• [Elecraft] Mod to K2 tx audio range?   Casey
• [Elecraft] K2 TX audio response mod?   Casey
• [Elecraft] TEST   KARL MARDERIAN
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] Test...Pse ignore   Ken Jones
• [Elecraft] UK Elecraft Net   Dave, G4AON
• [Elecraft] K2 TX audio response mod?   Bill Coleman
• [Elecraft] 6 meter key click retrospective   Guy Olinger K2AV
• [Elecraft] K3 chirp in cross-band split   Nick-WA5BDU
• [Elecraft] [K3} Help, hex key for split knob   ab2tc
• [Elecraft] [K3} Help, hex key for split knob   N1JM
• [Elecraft] [K3} Help, hex key for split knob   Ken Kopp
• [Elecraft] [K3} Help, hex key for split knob   ab2tc
• [Elecraft] WTB KAF2   Mark - W5EZY
• [Elecraft] 1750hz tone?   DM4iM
• [Elecraft] WTB KAF2   Guy Olinger K2AV
• [Elecraft] K3 chirp in cross-band split   Bill W4ZV
• [Elecraft] [K3] VFO A and B moving together   Tim
• [Elecraft] [K3] VFO A and B moving together   Bill W4ZV
• [Elecraft] [K3] VFO A and B moving together   Alan Bloom
• [Elecraft] 2.1 kHz filter - K3   Michael M. Raskin
• [Elecraft] [K3] VFO A and B moving together   Tim
• [Elecraft] [K3} Help, hex key for split knob   Mike
• [Elecraft] 2.1 kHz filter - K3   Bill W4ZV
• [Elecraft] 2.1 kHz filter - K3   Bob - W0GI
• [Elecraft] [K3] Portable Fit: K3 versus K2   Phil Hystad
• [Elecraft] K3 and an   Ross
• [Elecraft] [K3] Portable Fit: K3 versus K2   lstavenhagen
• [Elecraft] [K3] Portable Fit: K3 versus K2   Don Wilhelm
• [Elecraft] K3 and an external transverter   Ross
• [Elecraft] [K3] Portable Fit: K3 versus K2   Jim Brown
• [Elecraft] [K3] Portable Fit: K3 versus K2   Gary Gregory
• [Elecraft] [K3] Portable Fit: K3 versus K2   Fred Jensen
• [Elecraft] 2.1 kHz filter - K3   Guy Olinger K2AV
• [Elecraft] [K3] Portable Fit: K3 versus K2   Phil Hystad
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft SSB Net Announcement   Philippe Trottet
• [Elecraft] 2.1 kHz filter - K3   Philippe Trottet
• [Elecraft] [K3] Pressing LOCK turns off TX   Julian, G4ILO
• [Elecraft] XV144 shutdown   DL5OCD
• [Elecraft] [K3} Help, hex key for split knob   David Dunn
• [Elecraft] kpa100 in a ec2 w kat100   Rolf Jansson
• [Elecraft] XV144 shutdown   David Pratt
• [Elecraft] kpa100 in a ec2 w kat100   Bob Nielsen
• [Elecraft] kpa100 in a ec2 w kat100   paulb
• [Elecraft] kpa100 in a ec2 w kat100   Alan D. Wilcox
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   drewko
• [Elecraft] 2.1 kHz filter - K3   Hector Padron
• [Elecraft] ESSB   Michael M. Raskin
• [Elecraft] [K3} Help, hex key for split knob   N3XX
• [Elecraft] A few thoughts on the K3 as an AM SWBC receiver   David Cutter
• [Elecraft] [K3} Help, hex key for split knob   Don Wilhelm
• [Elecraft] [K3] User Programmable Display Area   Phil Hystad
• [Elecraft] ESSB   DL5OCD
• [Elecraft] ESSB   Phil LaMarche
• [Elecraft] [K3] User Programmable Display Area   lstavenhagen
• [Elecraft] (no subject)   Edward R Cole
• [Elecraft] kpa100 in my ec2 w kat100   Rolf Jansson
• [Elecraft] kpa100 in a ec2 w kat100   Bill NY9H
• [Elecraft] Metric Standards   Phil Kane
• [Elecraft] Metric Standards   VTuff59795 at aol.com
• [Elecraft] Metric Standards   David Ferrington, M0XDF
• [Elecraft] FOR SALE: KX1---SOLD   Elliott Lawrence
• [Elecraft] 1750hz tone?   DM4iM
• [Elecraft] Icom net was on 14.316 today   Ron Midwin
• [Elecraft] Icom net was on 14.316 todaye   Phil Kane
• [Elecraft] Split knob question   Ken Kopp
• [Elecraft] Icom net was on 14.316 todaye   Sam Morgan
• [Elecraft] Icom net was on 14.316 todaye   ab2tc
• [Elecraft] K3   Phil LaMarche
• [Elecraft] Icom net was on 14.316 todaye   Sam Morgan
• [Elecraft] Split knob question   WILLIS COOKE
• [Elecraft] Metric Standards   Bob
• [Elecraft] Split knob question   Ken Kopp
• [Elecraft] firmware upgrade snafoo   Sam Morgan
• [Elecraft] Icom net was on 14.316 todaye   ab2tc
• [Elecraft] K3   Don Wilhelm
• [Elecraft] Metric Standards   David Ferrington, M0XDF
• [Elecraft] Split knob question   John Harper
• [Elecraft] firmware upgrade snafoo   Sam Morgan
• [Elecraft] firmware upgrade snafoo   Bruce Beford
• [Elecraft] firmware upgrade snafoo   Don Wilhelm
• [Elecraft] firmware upgrade snafoo   Bruce Beford
• [Elecraft] (no subject)   Fred Jensen
• [Elecraft] Split knob question   Mike
• [Elecraft] firmware upgrade snafoo   Sam Morgan
• [Elecraft] firmware upgrade snafoo   Mike
• [Elecraft] firmware upgrade snafoo   Sam Morgan
• [Elecraft] firmware upgrade snafoo   Dick Dievendorff
• [Elecraft] firmware upgrade snafoo   Bill W4ZV
• [Elecraft] firmware upgrade snafoo   Sam Morgan
• [Elecraft] 2.1 kHz filter - K3   Bill K9YEQ
• [Elecraft] firmware upgrade snafoo   Sam Morgan
• [Elecraft] Split knob question   Jens Petersen
• [Elecraft] Split knob question   WILLIS COOKE
• [Elecraft] firmware upgrade snafoo   Don Wilhelm
• [Elecraft] K3 DSP Upgrade   Evert Bakker (PA2KW)
• [Elecraft] Metric Standards   David Dunn
• [Elecraft] Split knob question   Grant Youngman
• [Elecraft] K2 Audio Filter Question   Paul Huff
• [Elecraft] Split knob question   WILLIS COOKE
• [Elecraft] Split Knob Question   Tom Williams
• [Elecraft] K2 Audio Filter Question   Don Wilhelm
• [Elecraft] Elecraft CW Net Report for May 9th & 10th, 2010   Kevin Rock
• [Elecraft] K3 and an external transverter   Don Wilhelm
• [Elecraft] Elecraft SSB Net Report for May 9th, 2010   Roger Stein
• [Elecraft] Elecraft SSB Net Report for May 9th, 2010   Augie "Gus" Hansen
• [Elecraft] Elecraft SSB Net on 14.314   Edward R Cole
• [Elecraft] Elecraft SSB Net Report for May 9th, 2010   Philippe Trottet
• [Elecraft] External Power Supply for the KPA-500   Ignacy
• [Elecraft] Elecraft SSB Net Report for May 9th, 2010   Roger Stein
• [Elecraft] Portable Fit: K3 versus K2   eric manning
• [Elecraft] K3 NET INFO   Emilse Peraza
• [Elecraft] Fwd: K3 NET INFO   Roger Stein
• [Elecraft] K2 grey color   edward kacura
• [Elecraft] FW: W9DVM Re: K3 1605   Phil LaMarche
• [Elecraft] K2 grey color   Alan Bloom
• [Elecraft] Portable Fit: K3 versus K2   John Harper
• [Elecraft] Portable Fit: K3 versus K2   Grant Youngman
• [Elecraft] Portable Fit: K3 versus K2   Wes Stewart
• [Elecraft] More radio shack stuff   KARL MARDERIAN
• [Elecraft] KAT3 use questions   Stan Gibbs
• [Elecraft] K1 test   ki4bbl at cox.net
• [Elecraft] KAT3 use questions   Fred Jensen
• [Elecraft] N2CQ QRP Contest Calendar: May 12 - June 13, 2010   Ken Newman
• [Elecraft] K1 LCD backlight foam etc   ki4bbl at cox.net
• [Elecraft] [K2] Update on the Availability of Legacy Rework Eliminator(TM) Accessories!   Gary Hvizdak
• [Elecraft] K1 LCD backlight foam etc   Don Wilhelm
• [Elecraft] K3 AM TX - Questions and Observations   Andy Wood
• [Elecraft] [K2] Update on the Availability of Legacy Rework Eliminator(TM) Accessories!   Don Wilhelm
• [Elecraft] Calling CQ on PSK-31   Frank MacDonell
• [Elecraft] K3 AM TX - Questions and Observations   Tom W8JI
• [Elecraft] K3 AM TX - Questions and Observations   Duncan Carter
• [Elecraft] [K2] Update on the Availability of Legacy Rework Eliminator(TM) Accessories!   lstavenhagen
• [Elecraft] KAT3 use questions   drewko
• [Elecraft] [K2] Update on the Availability of Legacy Rework Eliminator(TM) Accessories!   Don Wilhelm
• [Elecraft] Calling CQ on PSK-31   Steve Ellington
• [Elecraft] Calling CQ on PSK-31   lstavenhagen
• [Elecraft] Calling CQ on PSK-31   Steve Ellington
• [Elecraft] Calling CQ on PSK-31   lstavenhagen
• [Elecraft] KAT3 use questions   d.cutter at ntlworld.com
• [Elecraft] Calling CQ on PSK-31   Julian, G4ILO
• [Elecraft] Slightly OT: "K2 Sales Targeted"   Al Gulseth
• [Elecraft] Subject: Re: Calling CQ on PSK-31   Jon Perelstein
• [Elecraft] Calling CQ on PSK-31   Wes Stewart
• [Elecraft] Subject: Re: Calling CQ on PSK-31   Phil Hystad
• [Elecraft] Subject: Re: Calling CQ on PSK-31   Jens Petersen
• [Elecraft] Subject: Re: Calling CQ on PSK-31   Jon Perelstein
• [Elecraft] Subject: Re: Calling CQ on PSK-31   Fumiaki Okushi
• [Elecraft] Calling CQ on PSK-31   Parker Buckley
• [Elecraft] Calling CQ on PSK-31   Rich - K1HTV
• [Elecraft] Calling CQ on PSK-31   Eric Fitzgerald
• [Elecraft] Calling CQ on PSK-31   Wes Stewart
• [Elecraft] Subject: Re: Calling CQ on PSK-31   Kok Chen
• [Elecraft] Calling CQ on PSK-31 (beacons)   Hector Padron
• [Elecraft] kpa100 in a ec2 w kat100   Mark - W5EZY
• [Elecraft] [K3} Help, hex key for split knob   Jack Brabham
• [Elecraft] K3/10 to K3/100 Conversion Project   John Frerichs
• [Elecraft] Wishing You a Happy and Successful Dayton!   Edward Dickinson, III
• [Elecraft] kpa100 in a ec2 w kat100   Paul at N4LCD.com
• [Elecraft] Calling CQ on PSK-31   Tom W8JI
• [Elecraft] FS LP-Pan E-Mu 0202   Doug Freeman
• [Elecraft] K2 Stuff For Sale   Dave & Jeanne Robertson
• [Elecraft] Portable Fit: K3 versus K2   Ignacy
• [Elecraft] Slightly OT: "K2 Sales Targeted"   Matt Palmer
• [Elecraft] K2/KPA100   Larry Dodson
• [Elecraft] Slightly OT: "K2 Sales Targeted"   Gary Gregory
• [Elecraft] Dayton Elecraft Booth Help   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Slightly OT: "K2 Sales Targeted"   David Cutter
• [Elecraft] Calling CQ on PSK-31   Julian, G4ILO
• [Elecraft] [K3} Help, hex key for split knob   David Christ
• [Elecraft] Callin CQ on PSK-31   N4CW at aol.com
• [Elecraft] [K3} Help, hex key for split knob   Don Wilhelm
• [Elecraft] Subject: Re: Calling CQ on PSK-31   lstavenhagen
• [Elecraft] where's AC7AC been???   David Windisch
• [Elecraft] Subject: Re: Calling CQ on PSK-31   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] [K3} Help, hex key for split knob   Tom W8JI
• [Elecraft] [K3} Help, hex key for split knob   Tom W8JI
• [Elecraft] [K3} Help, hex key for split knob   Guy Olinger K2AV
• [Elecraft] K3 AM TX - Questions and Observations   Andy Wood
• [Elecraft] WANTED: K3   Eddie DeYoung
• [Elecraft] Dayton   Jim Brown
• [Elecraft] K3 AM TX - Questions and Observations   Joe Subich, W4TV
• [Elecraft] K2/KPA100   Bill Coleman
• [Elecraft] K3 AM TX - Questions and Observations   Andy Wood
• [Elecraft] K3 AM TX - Questions and Observations   Mark Stennett
• [Elecraft] K3 AM TX - Questions and Observations   Andy Wood
• [Elecraft] K2 4 MHz Osc Calibration with RWM Moscow [C1]   Colin BUTCHER
• [Elecraft] K3 AM TX - Questions and Observations   Brett Howard
• [Elecraft] Semi-OT: seeking circuit designs for 2 meter LPF   Lew Phelps K6LMP
• [Elecraft] Semi-OT: seeking circuit designs for 2 meter LPF   Wes Stewart
• [Elecraft] Semi-OT: seeking circuit designs for 2 meter LPF   Tom W8JI
• [Elecraft] [K3} Help, hex key for split knob   Jack Brabham
• [Elecraft] > Subject: Semi-OT: seeking circuit designs for 2 meter LPF   elecraft at g4fre.com
• [Elecraft] K2 audio out   Dan Grizzard
• [Elecraft] [K3} Help, hex key for split knob   drewko
• [Elecraft] K2: need 1.05 or newer firmware chip   Allan Taylor
• [Elecraft] Slightly OT "K2 sales targeted"   Barry Middleton
• [Elecraft] Working PSK-31 / Frank MacDonnel   Russ Darling
• [Elecraft] K3/10 CW on USB   Frank MacDonell
• [Elecraft] K3/10 CW on USB   Phil Hystad
• [Elecraft] K3 1500 Khz Roofing Filter   Roy Morris
• [Elecraft] K3/10 CW on USB   Mike Harris
• [Elecraft] K2: need 1.05 or newer firmware chip   Mark - W5EZY
• [Elecraft] [K3} Help, hex key for split knob   Tom W8JI
• [Elecraft] [K3} Help, hex key for split knob   Tom W8JI
• [Elecraft] PSK31 Split   Evert Bakker (PA2KW)
• [Elecraft] Calling CQ on PSK-31   Edward R Cole
• [Elecraft] OT: Ladder Line Spacers   Ken Kopp
• [Elecraft] K3 1500 Khz Roofing Filter   David Gilbert
• [Elecraft] OT: The use "QRP"   Ken Kopp
• [Elecraft] OT: Ladder Line Spacers   Steve Ellington
• [Elecraft] OT: The use "QRP"   Dale Putnam
• [Elecraft] K2 S/N 1134 For Sale   Jim Bennett / W6JHB
• [Elecraft] K2 S/N 1134 For Sale   Jim Bennett / W6JHB
• [Elecraft] OT: The use "QRP"   Bill VanAlstyne W5WVO
• [Elecraft] K2 S/N 1134 For Sale   Alan D. Wilcox
• [Elecraft] OT: Ladder Line Spacers   Wes Stewart
• [Elecraft] K3 1500 Khz Roofing Filter   Roy Morris
• [Elecraft] OT: The use "QRP"   Wes Stewart
• [Elecraft] Fw: OT: Ladder Line Spacers   Ken Kopp
• [Elecraft] Dayton purchase - KX1 or K2?   steve d
• [Elecraft] FS LP-Pan and E-Mu 0202   Craig WØLV
• [Elecraft] K2 SSB install with major oops   Sean Cavanaugh
• [Elecraft] Dayton purchase - KX1 or K2?   The Smiths
• [Elecraft] OT: Ladder Line Spacers   David Gilbert
• [Elecraft] K2: need 1.05 or newer firmware chip   Allan Taylor
• [Elecraft] K3 wanted - more info   Eddie DeYoung
• [Elecraft] Fw: OT: Ladder Line Spacers   Fred Jensen
• [Elecraft] Fw: OT: Ladder Line Spacers   Ken Kopp
• [Elecraft] K3 sn # 4257 is Operational!   Jeff Cochrane - VK4BOF
• [Elecraft] K3 sn # 4257 is Operational!   rfenabled at gmail.com
• [Elecraft] Fw: OT: Ladder Line Spacers   Fred Jensen
• [Elecraft] OT: Ladder Line Spacers   Tom W8JI
• [Elecraft] Fw: OT: Ladder Line Spacers   Tom W8JI
• [Elecraft] Semi-OT: seeking circuit designs for 2 meter LPF   Graham Kimbell (G3TCT)
• [Elecraft] OT: The use "QRP"   Jan Erik Holm
• [Elecraft] CE declaration of conformity   Jon Kåre Hellan
• [Elecraft] OT: The use "QRP"   Gary Gregory
• [Elecraft] OT: Ladder Line Spacers   David Dunn
• [Elecraft] OT: The use "QRP"   Tom W8JI
• [Elecraft] OT: The use "QRP"   briana
• [Elecraft] CE declaration of conformity   David Pratt
• [Elecraft] Another ladder line spreader idea   Albers
• [Elecraft] Dayton purchase - KX1 or K2?   John W2XS
• [Elecraft] INRAD 1.5 KHz silter   eric manning
• [Elecraft] Another ladder line spreader idea   Eric Fitzgerald
• [Elecraft] OT: The use "QRP"   lstavenhagen
• [Elecraft] [K3} Help, hex key for split knob   Jack Brabham
• [Elecraft] Using /QRP in CW contests   Guy Olinger K2AV
• [Elecraft] OT: The use "QRP"   Jan Erik Holm
• [Elecraft] K144XV?   John Burkholder
• [Elecraft] K2 S/N 1134 For Sale   Jim Bennett / W6JHB
• [Elecraft] Using /QRP in CW contests   WA6L
• [Elecraft] K2 4 MHz Osc Calibration with RWM Moscow [C1]   Don Wilhelm
• [Elecraft] OT: Ladder Line Spacers   Wes Stewart
• [Elecraft] K2 audio out   Don Wilhelm
• [Elecraft] Using /QRP in CW contests   g3ymc
• [Elecraft] OT: The use "QRP"   Brendan Minish
• [Elecraft] Heil Goldline mic   Bob Garceau
• [Elecraft] OT: Ladder Line Spacers   David Gilbert
• [Elecraft] OT: The use "QRP"   Fred Jensen
• [Elecraft] OT: The use "QRP"   DM4iM
• [Elecraft] OT: The use "QRP"   lstavenhagen
• [Elecraft] K144XV?   Paul at N4LCD.com
• [Elecraft] Heil Goldline mic   Karl Marderian
• [Elecraft] K3 config save and vfo push settings   Forrest Hudspeth
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Andrew Moore
• [Elecraft] Heil Goldline mic   Joe Subich, W4TV
• [Elecraft] Heil Goldline mic   Don Wilhelm
• [Elecraft] Amazing order fulfillment   Pete Smith
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Steve Ellington
• [Elecraft] OT: The use "QRP"   Gary Hinson
• [Elecraft] [K3} Help, hex key for split knob   ab2tc
• [Elecraft] Heil Goldline mic   Bob Garceau
• [Elecraft] OT: The use "QRP"   Gary Gregory
• [Elecraft] K2 SSB install with major oops   Bill Coleman
• [Elecraft] OT: The use "QRP" [END of thread.]   Eric Swartz - WA6HHQ, Elecraft.
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   DK4XL
• [Elecraft] K2 SSB install with major oops   Sean Cavanaugh
• [Elecraft] K3 config save and vfo push settings   Dick Dievendorff
• [Elecraft] Elecraft Digest, Vol 73, Issue 15 - message 7 - using /QRP in contests   JONES, George
• [Elecraft] Elecraft at Dayton   Peter ZL1PWD
• [Elecraft] Elecraft at Dayton   rfenabled at gmail.com
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Steve Ellington
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   DK4XL
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Andrew Moore
• [Elecraft] Seeking 40m on-air RX of K3 CW. Anyone?   Andrew Moore
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   WILLIS COOKE
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   lstavenhagen
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   lstavenhagen
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Steve Ellington
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   WILLIS COOKE
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   DK4XL
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Paul Christensen
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   David Gilbert
• [Elecraft] OT: Dayton 2010 Photos, etc.   Edward Dickinson, III
• [Elecraft] K2 S/N 1134 For Sale   Jim Bennett / W6JHB
• [Elecraft] Heil Goldline Mics   John Lawrence
• [Elecraft] K3 Link to QRQ CW RECORDING   Steve Ellington
• [Elecraft] Elecraft at Dayton   Darin Land
• [Elecraft] K3 Link to QRQ CW RECORDING   Guy Olinger K2AV
• [Elecraft] OT: Dayton 2010 Photos, etc.   Edward Dickinson, III
• [Elecraft] OT: Dayton 2010 Photos, etc.   Guy Olinger K2AV
• [Elecraft] OT: Dayton 2010 Photos, etc.   Edward Dickinson, III
• [Elecraft] K3 Link to QRQ CW RECORDING   Steve Ellington
• [Elecraft] K3 Link to QRQ CW RECORDING   Jessie Oberreuter
• [Elecraft] K3 Link to QRQ CW RECORDING   Guy Olinger K2AV
• [Elecraft] K3 Link to QRQ CW RECORDING   Steve Ellington
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Dave Agsten
• [Elecraft] QRP ARCI 'Four Days In May' - Elecraft webcast   Steve, G4GXL
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Tom W8JI
• [Elecraft] QRP ARCI 'Four Days In May' - Elecraft webcast   Don Cunningham
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Guy Olinger K2AV
• [Elecraft] K3: QRQ high-speed QSK   Ralph Parker
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   Greg
• [Elecraft] How is K3 QRQ QSK performance 50-100 WPM?   juergen
• [Elecraft] K3: QRQ high-speed QSK   David Cutter
• [Elecraft] Amplifier tuning K3 (was QRQ QSK)   Tom W8JI
• [Elecraft] UK Elecraft SSB net   Ian Maude
• [Elecraft] K3: QRQ high-speed QSK   Jim Miller KG0KP
• [Elecraft] K3: QRQ high-speed QSK   Paul Christensen
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Björn Mohr
• [Elecraft] K3: QRQ high-speed QSK   David Cutter
• [Elecraft] K3: QRQ high-speed QSK   Tom W8JI
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Tom W8JI
• [Elecraft] K3: QRQ high-speed QSK   David Cutter
• [Elecraft] K3: QRQ high-speed QSK   Toby Pennington
• [Elecraft] Son of K3??   jack jackson
• [Elecraft] K3: QRQ high-speed QSK   John, KD8K
• [Elecraft] K3: QRQ high-speed QSK   Andrew Moore
• [Elecraft] K3: QRQ high-speed QSK   Steve Ellington
• [Elecraft] K3: QRQ high-speed QSK   lstavenhagen
• [Elecraft] Son of K3??   Hector Padron
• [Elecraft] K3: QRQ high-speed QSK   FredJensen
• [Elecraft] K3: QRQ high-speed QSK   Guy Olinger K2AV
• [Elecraft] Dell 8400 for data   Mike Rodgers
• [Elecraft] Heil Goldline Mics   Barry Pfeil
• [Elecraft] OT: virtual serial port setup help needed   Sam Morgan
• [Elecraft] K3: QRQ high-speed QSK   Jan Erik Holm
• [Elecraft] First impressions of my Elecraft K3.   David Quental
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] Elecraft SSB Net Announcement   Philippe Trottet
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Vic K2VCO
• [Elecraft] OT: virtual serial port setup help needed   ab2tc
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   ALAN GARD
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   David M. Elliott
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Guy Olinger K2AV
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Rob
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   David M. Elliott
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Vic K2VCO
• [Elecraft] KPA100 & KAT100 For sale or trade! Fully assembled   W7TMD
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   juergen
• [Elecraft] Son of K3??   William Ravenel
• [Elecraft] Photos of KX-1 and K1   Alan D. Wilcox
• [Elecraft] Son of K3??   Don Rasmussen
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Tom W8JI
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Guy Olinger K2AV
• [Elecraft] Son of K3??   Edward Dickinson, III
• [Elecraft] Son of K3??   Jim Wiley
• [Elecraft] Son of K3??   George A. Thornton
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Son of K3??   juergen
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   David M. Elliott
• [Elecraft] Son of K3??   Jim Miller KG0KP
• [Elecraft] Son of K3??   Wes Stewart
• [Elecraft] First impressions of my Elecraft K3.   Jim Bennett / W6JHB
• [Elecraft] K3 the mountain Kenwood must climb.   Karl Marderian
• [Elecraft] No KPA500 News from Dayton?   Edward Dickinson, III
• [Elecraft] K3 S/N 4251 under construction   Richard Dowling
• [Elecraft] Son of K3??   Jan Erik Holm
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Tom W8JI
• [Elecraft] K3 SubRX anomaly continued   Pete Connors
• [Elecraft] K3 SubRX anomaly continued   Pete Connors
• [Elecraft] Son of K3??   Bob Schreibmaier
• [Elecraft] [K3] Ordered K3 at Dayton   WB8ENE
• [Elecraft] Son of K3??   lstavenhagen
• [Elecraft] AC hum on tune   Sam Morgan
• [Elecraft] Son of K3??   Geoffrey Mackenzie-Kennedy
• [Elecraft] AC hum on tune   Karl Marderian
• [Elecraft] [K3] Ordered K3 at Dayton   Don Rasmussen
• [Elecraft] Son of K3??   Hector Padron
• [Elecraft] K3 DSP Upgrade Board   Terry Schieler
• [Elecraft] Son of K3??   Wes Stewart
• [Elecraft] K3 New Amp   Phil LaMarche
• [Elecraft] AC hum on tune   Guy Olinger K2AV
• [Elecraft] Son of K3??   lstavenhagen
• [Elecraft] Son of K3??   Don Rasmussen
• [Elecraft] AC hum on tune   Sam Morgan
• [Elecraft] Son of K3??   Bert Craig
• [Elecraft] AC hum on tune   Jim Wiley
• [Elecraft] Son of K3?? & P3 keyboard interface   Bill NY9H
• [Elecraft] K3 DSP Upgrade Board   Bruce Beford
• [Elecraft] Son of K3?? & P3 keyboard interface   W4CCS
• [Elecraft] Son of K3?? & P3 keyboard interface   Gary Gregory
• [Elecraft] Son of K3?? & P3 keyboard interface   Grant Youngman
• [Elecraft] Son of K3?? & P3 keyboard interface   W4CCS
• [Elecraft] AC hum on tune   Tom W8JI
• [Elecraft] N6XVT   Richard McGaver
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Guy Olinger K2AV
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   David M. Elliott
• [Elecraft] A Few Photos of the KPA500   Don Nesbitt
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Guy Olinger K2AV
• [Elecraft] AC hum on tune   Julian, G4ILO
• [Elecraft] Hum   Karl Marderian
• [Elecraft] AC hum on tune   Fred Jensen
• [Elecraft] Son of K3??   Karl Marderian
• [Elecraft] A Few Photos of the KPA500   Elliott Lawrence
• [Elecraft] K3 Link to QRQ CW RECORDING   VR2BrettGraham
• [Elecraft] New K3 QRQ CW mode in the works   Wayne Burdick
• [Elecraft] AC hum on tune   Sam Morgan
• [Elecraft] AC hum on tune   Mike WA8BXN
• [Elecraft] New K3 QRQ CW mode in the works   Andrew Moore
• [Elecraft] New K3 QRQ CW mode in the works   Steve Ellington
• [Elecraft] Elecraft SSB net results (5-16-10)   Phillip Shepard
• [Elecraft] Difficulty getting through to list   Phillip Shepard
• [Elecraft] New K3 QRQ CW mode in the works   Guy Olinger K2AV
• [Elecraft] FW: Elecraft SSB net results (5-16-10)   Phillip Shepard
• [Elecraft] New K3 QRQ CW mode in the works   lstavenhagen
• [Elecraft] Son of K3??   Geoffrey Mackenzie-Kennedy
• [Elecraft] A Few Photos of the KPA500   Ross Primrose N4RP
• [Elecraft] NAQCC Sprint Wednesday night!   NAQCC
• [Elecraft] Elecraft CW Net Report for May 16th & 17th, 2010   Kevin Rock
• [Elecraft] New K3 QRQ CW mode in the works   DK4XL
• [Elecraft] New K3 QRQ CW mode in the works   Rick Dettinger
• [Elecraft] KX1 Build Part 1 Test Errors   Mike M
• [Elecraft] New K3 QRQ CW mode in the works   Doug Turnbull
• [Elecraft] W2 Wattmeter question   dalej
• [Elecraft] W2 Wattmeter question   David Ferrington, M0XDF
• [Elecraft] Dayton purchase... K2!   steve d
• [Elecraft] K2 value   Ken Chandler
• [Elecraft] [K3] Ordered K3 at Dayton   WB8ENE
• [Elecraft] Dayton purchase... K2!   lstavenhagen
• [Elecraft] Com 3 Access Denied   Frank MacDonell
• [Elecraft] New K3 QRQ CW mode in the works   Bill W4ZV
• [Elecraft] K1 Alignment and Test Part I   Dominic Baines
• [Elecraft] K2 value   Alan D. Wilcox
• [Elecraft] Com 3 Access Denied   Guy Olinger K2AV
• [Elecraft] New K3 QRQ CW mode in the works   Joe Subich, W4TV
• [Elecraft] Son of K3??   Don Wilhelm
• [Elecraft] AC hum on tune   Tom W8JI
• [Elecraft] [K3] Ordered K3 at Dayton   W5CEM
• [Elecraft] [K3] Ordered K3 at Dayton   WB8ENE
• [Elecraft] [K3] Ordered K3 at Dayton   W5CEM
• [Elecraft] Son of K3?? & P3 keyboard interface   Alan Bloom
• [Elecraft] K1 Alignment and Test Part I   Don Wilhelm
• [Elecraft] Son of K3?? & P3 keyboard interface   Gary Gregory
• [Elecraft] KX1 Build Part 1 Test Errors   Don Wilhelm
• [Elecraft] Iambic Keying   W4CCS
• [Elecraft] Iambic Keying   Mike Cox
• [Elecraft] Iambic Keying   W4CCS
• [Elecraft] W2 Wattmeter question   Robert Friess
• [Elecraft] Iambic Keying   Don Wilhelm
• [Elecraft] Iambic Keying   W4CCS
• [Elecraft] Iambic Keying   W4CCS
• [Elecraft] Iambic Keying   Greg - AB7R
• [Elecraft] Son of K3??   Karl Marderian
• [Elecraft] KPA500   Karl Marderian
• [Elecraft] KPA500   Alan Bloom
• [Elecraft] Iambic Keying   Karl Marderian
• [Elecraft] Son of K3??   Karl Marderian
• [Elecraft] Iambic Keying   Joe Subich, W4TV
• [Elecraft] Memory Manager Software   Radio Amateur N5GE
• [Elecraft] Windows 7 Home Premium 64 Bit   Frank MacDonell
• [Elecraft] AM again   Tom W8JI
• [Elecraft] OT: ROCKWELL automation at Dayton   Don Rasmussen
• [Elecraft] AM again   Don Wilhelm
• [Elecraft] AM again   Don Rasmussen
• [Elecraft] OT: ROCKWELL automation at Dayton   paulb
• [Elecraft] Memory Manager Software   Dick Dievendorff
• [Elecraft] OT: ROCKWELL automation at Dayton   Deni
• [Elecraft] OT: Rockwell automation   Ken Kopp
• [Elecraft] OT: Rockwell automation   David Gilbert
• [Elecraft] K1 Alignment and Test Part I   Dominic Baines
• [Elecraft] K3 Allband?   DM4iM
• [Elecraft] OT: ROCKWELL automation at Dayton   Gary Gregory
• [Elecraft] AM again   Geoffrey Mackenzie-Kennedy
• [Elecraft] DM780 Crash with Windows Vista Home Premium   Frank MacDonell
• [Elecraft] OT: ROCKWELL automation at Dayton   Monty Shultes
• [Elecraft] OT: ROCKWELL automation at Dayton   Matt Palmer
• [Elecraft] Strange problem last night in my K3   Ramiro Aceves
• [Elecraft] Windows 7 Home Premium 64 bit versus DM780   Frank MacDonell
• [Elecraft] K3 Allband?   DM4iM
• [Elecraft] For Sale: K160RX   phil-z at comcast.net
• [Elecraft] Windows 7 Home Premium 64 bit versus DM780   lstavenhagen
• [Elecraft] DM780 Crash with Windows Vista Home Premium   Joe Vrabel
• [Elecraft] Windows 7 Home Premium 64 Bit   George A. Thornton
• [Elecraft] 160 kit   W2bpi1 at aol.com
• [Elecraft] N3ZP   W2bpi1 at aol.com
• [Elecraft] K3: all RX muted on transmit?   Brian Machesney
• [Elecraft] K1 VFO tuning range   SQ5FWR
• [Elecraft] K3: all RX muted on transmit?   Lyle Johnson
• [Elecraft] K1 VFO tuning range   Don Wilhelm
• [Elecraft] K2 S/N 1999   Ed Lambert
• [Elecraft] DM780 Crash with Windows Vista   Jon Perelstein
• [Elecraft] K2AT to QRP Cover!   Jim Harris
• [Elecraft] DM780 Crash with Windows Vista   lstavenhagen
• [Elecraft] K2 S/N 1999   Don Wilhelm
• [Elecraft] K2AT to QRP Cover!   Matt Palmer
• [Elecraft] DM780 Crash with Windows Vista   Alan D. Wilcox
• [Elecraft] K2AT to QRP Cover!   Don Wilhelm
• [Elecraft] K3 Allband?   Edward R Cole
• [Elecraft] DM780 Crash with Windows Vista   Phil Hystad
• [Elecraft] DM780 Crash with Windows Vista [END of thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Allband?   Elliott Lawrence
• [Elecraft] K1 VFO tuning range   SQ5FWR
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Wayne Burdick
• [Elecraft] K3/144   Phil LaMarche
• [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   David Ferrington, M0XDF
• [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   The Smiths
• [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB   The Smiths
• [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   David Ferrington, M0XDF
• [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Vic K2VCO
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Wayne Burdick
• [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Lance Collister, W7GJ
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   David Ferrington, M0XDF
• [Elecraft] K3 - RTTY on 30 meters   John E. Reiser
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Wayne Burdick
• [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Don Wilhelm
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Jay Rodaman
• [Elecraft] K3/144   john at kd8k.com
• [Elecraft] K3 Allband?   David Woolley (E.L)
• [Elecraft] K3 - RTTY on 30 meters   Iain MacDonnell - N6ML
• [Elecraft] OT: ROCKWELL automation at Dayton   Rich - K1HTV
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Gary Gregory
• [Elecraft] K3 - RTTY on 30 meters   John E. Reiser
• [Elecraft] TV and computer interferencies - K3's fault ?   David Quental
• [Elecraft] K3 Firmware Rev. 3.97: New K3 utility?   Bruce Beford
• [Elecraft] K3: Elecraft magic   Pete Connors
• [Elecraft] K3 Firmware Rev. 3.97: New K3 utility?   Dick Dievendorff
• [Elecraft] K1 Alignment and Test Part I   William Ravenel
• [Elecraft] K3 Memory Editor   Fred Jensen
• [Elecraft] K3 Memory Editor   Fred Jensen
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Hector Padron
• [Elecraft] K3 Memory Editor   Jim Miller KG0KP
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   David Ferrington, M0XDF
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Jeff Cochrane - VK4BOF
• [Elecraft] K3/144   Mike
• [Elecraft] K3 / Data & Remote Questions   Jim Bennett / W6JHB
• [Elecraft] K3 / Data & Remote Questions   Kok Chen
• [Elecraft] K3 / Data & Remote Questions   Phil Hystad
• [Elecraft] K3 / Data & Remote Questions   David Herring, K6DCH
• [Elecraft] Dayton purchase... K2!   2rGarry
• [Elecraft] TV and computer interferencies - K3's fault ?   David Woolley (E.L)
• [Elecraft] TV and computer interferencies - K3's fault ?   Pete Smith
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Hector Padron
• [Elecraft] Delight in the law of the LORD.   W2bpi1 at aol.com
• [Elecraft] Delight in the law of the LORD. OT!   Richard Squire - HB9ANM
• [Elecraft] Delight in the law of the LORD.   W2bpi1 at aol.com
• [Elecraft] K3 and K2 N4PY Control Software Support   KM4VX
• [Elecraft] K3/144   Phil LaMarche
• [Elecraft] K3: Use AM SYNC on WWV to calibrate DDS?   K1LI
• [Elecraft] K3: Use AM SYNC on WWV to calibrate DDS?   Don Wilhelm
• [Elecraft] K1 for K2   Rob at Peg Pohorence
• [Elecraft] K3: Use AM SYNC on WWV to calibrate DDS?   Duncan Carter
• [Elecraft] K3: Use AM SYNC on WWV to calibrate DDS?   Mike Harris
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Wes Stewart
• [Elecraft] Religious Content   N6FB at aol.com
• [Elecraft] Religious Content [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3:mem channel dead   Stephen Prior
• [Elecraft] K2AT to QRP Cover!   eric manning
• [Elecraft] Beta Software   Richard Thorpe
• [Elecraft] Beta Software   Lyle Johnson
• [Elecraft] Beta Software   Monty Shultes
• [Elecraft] AC hum on tune   Sam Morgan
• [Elecraft] Beta Software   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] TV and computer interferencies - K3's fault ?   Jim Brown
• [Elecraft] K2 S/N 1999   George W
• [Elecraft] Just curious about K3 relay switching clics   Ramiro Aceves
• [Elecraft] Connections to K3 ant 1 & 2   N3XX
• [Elecraft] K3:Noise blanker & Chinese radar?   juergen
• [Elecraft] K3:Noise blanker & Chinese radar?   Philippe Trottet
• [Elecraft] Connections to K3 ant 1 & 2   Don Wilhelm
• [Elecraft] Connections to K3 ant 1 & 2   Mike Harris
• [Elecraft] K2: Suggestions wanted on slightly hotrodding an early S/N K2   Allan Taylor
• [Elecraft] K2: Suggestions wanted on slightly hotrodding an early S/N K2   Don Wilhelm
• [Elecraft] Connections to K3 ant 1 & 2   Joe Subich, W4TV
• [Elecraft] K3:Noise blanker & Chinese radar?   Lyle Johnson
• [Elecraft] K3:Noise blanker & Chinese radar?   Lyle Johnson
• [Elecraft] Looking for K3 post   Edward Dickinson, III
• [Elecraft] K3:Noise blanker & Chinese radar?   Merv Schweigert
• [Elecraft] Connections to K3 ant 1 & 2   Geoffrey Mackenzie-Kennedy
• [Elecraft] Connections to K3 ant 1 & 2   Edward R Cole
• [Elecraft] Looking for a builder   Kory Hamzeh
• [Elecraft] Connections to K3 ant 1 & 2   Tom W8JI
• [Elecraft] K3:Noise blanker & Chinese radar?   Lyle Johnson
• [Elecraft] LP-Pan & EMU-0202 cables included   Craig WØLV
• [Elecraft] Looking for a builder   Kory Hamzeh
• [Elecraft] Son of K3   Edward Dickinson, III
• [Elecraft] Son of K3   Tom W8JI
• [Elecraft] Heil Handie Mic IC Problem   K6PJ
• [Elecraft] Son of K3   Val
• [Elecraft] WANTED: Elecraft K3 Options (KAT3 Tuner, 2nd RX etc)   spitze1
• [Elecraft] [K3] Built in USB interface for K3   Allan G Duncan
• [Elecraft] [K3] Built in USB interface for K3   Bill VanAlstyne W5WVO
• [Elecraft] Heil Handie Mic IC Problem   Mike
• [Elecraft] [K3] Built in USB interface for K3   Jens Petersen
• [Elecraft] [K3] Built in USB interface for K3   Lyle Johnson
• [Elecraft] [K3] Built in USB interface for K3   Don Wilhelm
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   lstavenhagen
• [Elecraft] [K3] Built in USB interface for K3   lstavenhagen
• [Elecraft] Heil Handie Mic IC Problem   Don Wilhelm
• [Elecraft] K3 keypad Ascessory   Jim Miller KG0KP
• [Elecraft] [K3] Built in USB interface for K3   Allan G Duncan
• [Elecraft] [K3] Built in USB interface for K3   Phil Hystad
• [Elecraft] [K3] Built in USB interface for K3   Guy Olinger K2AV
• [Elecraft] [K3] Built in USB interface for K3   Phil Hystad
• [Elecraft] Fw: K3 Macro button pad   Jim Miller KG0KP
• [Elecraft] [K3] Built in USB interface for K3   Guy Olinger K2AV
• [Elecraft] Fw: K3 Macro button pad   Val
• [Elecraft] Possible USB 2.0 mod   Kevin Rock
• [Elecraft] [K3] Built in USB interface for K3   Phil Hystad
• [Elecraft] Possible USB 2.0 mod   Matt Zilmer
• [Elecraft] Possible USB 2.0 mod   Matt Zilmer
• [Elecraft] Fw: Possible USB 2.0 mod for K3   Kevin Rock
• [Elecraft] [K3] Built in USB interface for K3   Bill W4ZV
• [Elecraft] [K3] Built in USB interface for K3   Guy Olinger K2AV
• [Elecraft] [K3] Built in USB interface for K3   Don Wilhelm
• [Elecraft] Heil Handie Mic IC Problem   LARRY SPRINGER
• [Elecraft] [K3] Built in USB interface for K3   Brendan Minish
• [Elecraft] Fw: K3 Macro button pad   Jim Miller KG0KP
• [Elecraft] Memory key pad   Doug Turnbull
• [Elecraft] Heil Handie Mic IC Problem   Rod G3YHM
• [Elecraft] [K3] Built in USB interface for K3   Joe Subich, W4TV
• [Elecraft] Memory key pad & other functions   Bill NY9H
• [Elecraft] [K3] Built in USB interface for K3   George A. Thornton
• [Elecraft] [K3] Built in USB interface for K3   eric manning
• [Elecraft] [K3] Built in USB interface for K3   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K3] Built in USB interface for K3 [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 - 60 Meters   Edward Dickinson, III
• [Elecraft] Memory key pad   Jim Miller KG0KP
• [Elecraft] Memory key pad   Bill W4ZV
• [Elecraft] K3 - 60 Meters   Don Wilhelm
• [Elecraft] OT: K3 Utility beta   Pete Connors
• [Elecraft] [K3] Built in USB interface for K3   Lu Romero
• [Elecraft] K3 Macro button pad   Lu Romero
• [Elecraft] Fwd: Re: TV and computer interferencies - K3's fault ?   Phil Kane
• [Elecraft] Fwd: Re: TV and computer interferencies - K3's fault ?   David Quental
• [Elecraft] K3 Macro button pad   Val
• [Elecraft] Fwd: Re: TV and computer interferencies - K3's fault ?   Bill W4ZV
• [Elecraft] OT: heat sinking resistors   Vic Rosenthal
• [Elecraft] OT: heat sinking resistors   Craig D. Smith
• [Elecraft] OT: heat sinking resistors   Craig D. Smith
• [Elecraft] FT5000 review in Radcom   Stephen Prior
• [Elecraft] OT: heat sinking resistors   Dave KQ3T
• [Elecraft] [K3] Built in USB interface for K3   Julian, G4ILO
• [Elecraft] OT: heat sinking resistors   Mark Bayern
• [Elecraft] OT: heat sinking resistors   Phil & Debbie Salas
• [Elecraft] OT: heat sinking resistors   Don Wilhelm
• [Elecraft] N2CQ QRP Contest Calendar: May 21 - Jyne 21, 2010   Ken Newman
• [Elecraft] OT: heat sinking resistors   Phil & Debbie Salas
• [Elecraft] OT: heat sinking resistors   Don Wilhelm
• [Elecraft] OT: K3 Utility beta   Alan D. Wilcox
• [Elecraft] OT: heat sinking resistors   Geoffrey Mackenzie-Kennedy
• [Elecraft] OT: heat sinking resistors   Tom W8JI
• [Elecraft] FT5000 review in Radcom   Bill W4ZV
• [Elecraft] [K2] Parts for sale   David Douglass
• [Elecraft] Heil Handie Mic IC Problem   K6PJ
• [Elecraft] OT: heat sinking resistors   Ian White GM3SEK
• [Elecraft] K1 out on the Appalachian Trail   Ron Polityka
• [Elecraft] Connections to K3 ant 1 & 2   N3XX
• [Elecraft] CW TX in SSB mode   Gregg W6IZT
• [Elecraft] CW TX in SSB mode   Mike Cox
• [Elecraft] FT5000 review in Radcom   Hector Padron
• [Elecraft] CW TX in SSB mode   WILLIS COOKE
• [Elecraft] FT5000 review in Radcom   Bob Cunnings
• [Elecraft] FT-5000 againts K3 ?   Hector Padron
• [Elecraft] CW TX in SSB mode   Matt Zilmer
• [Elecraft] FT5000 review in Radcom   Hector Padron
• [Elecraft] FT5000 review in Radcom   Stephen Prior
• [Elecraft] heat sinking resistors   elecraft at g4fre.com
• [Elecraft] FT5000 review in Radcom   Toby Pennington
• [Elecraft] FT5000 review in Radcom   Eric Tichansky
• [Elecraft] FT5000 review in Radcom   Phil Hystad
• [Elecraft] FT5000 review in Radcom   Edward R Cole
• [Elecraft] Museum Ships/FT5000   WILLIS COOKE
• [Elecraft] K1 out on the Appalachian Trail   Fred Atchley
• [Elecraft] K3 Power Supply   Phil LaMarche
• [Elecraft] FT5000 review in Radcom/ new DXPedition   Hector Padron
• [Elecraft] K3 Power Supply   Duncan Carter
• [Elecraft] Test... Pse Disregard   Ken
• [Elecraft] K3 Power Supply   David M. Elliott
• [Elecraft] Central Texas K3 Owners   Tony Lyon
• [Elecraft] FT-5000 againts K3 ?   Bill W4ZV
• [Elecraft] FT-5000 againts K3 ?   Don Wilhelm
• [Elecraft] Elecraft SSB Net Announcement   Phillip Shepard
• [Elecraft] K3 Power Supply   Pete Smith
• [Elecraft] FT-5000 againts K3 ?   Joe Subich, W4TV
• [Elecraft] FT-5000 againts K3 ?   Dave KQ3T
• [Elecraft] K3 Power Supply   Randy Moore
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Jorge Diez - CX6VM
• [Elecraft] K3 Allband?   Jorge Diez - CX6VM
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Dick Dievendorff
• [Elecraft] K3 Firmware Rev. 3.97: new DSP NB algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.   Jorge Diez - CX6VM
• [Elecraft] FT-5000 againts K3 ?   Bill W4ZV
• [Elecraft] K3 Power Supply   István Szabó
• [Elecraft] K3 gain changes with filter selection   Richard Haendel
• [Elecraft] Museum Ships/FT5000   WILLIS COOKE
• [Elecraft] K1 out on the Appalachian Trail   Ron Polityka
• [Elecraft] K3 gain changes with filter selection   N3XX
• [Elecraft] K3 gain changes with filter selection   N3XX
• [Elecraft] K3 gain changes with filter selection   Dick Dievendorff
• [Elecraft] K3 Power Supply   Paul at N4LCD.com
• [Elecraft] K3:DSP upgrade error ERR DSE?   Craig
• [Elecraft] K3:DSP upgrade error ERR DSE?   Lyle Johnson
• [Elecraft] Whose radio? People vote with their pocketbooks. Only election day counts.   Guy Olinger K2AV
• [Elecraft] Whose radio? People vote with their pocketbooks. Only election day counts.   lstavenhagen
• [Elecraft] K3:DSP upgrade error ERR DSE?   Craig
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Samelex Power Supplies with a K3   N1JM
• [Elecraft] EMEU 0202 for sale (sold)   K8ZTT
• [Elecraft] [K2] Parts for sale   David Douglass
• [Elecraft] Possible USB 2.0 mod   Brett Howard
• [Elecraft] [K3] Built in USB interface for K3   Brett Howard
• [Elecraft] K3 gain changes with filter selection   Brett Howard
• [Elecraft] K3:DSP Upgrade well worth it   Craig
• [Elecraft] Possible USB 2.0 mod   Bob Naumann
• [Elecraft] Elecraft SSB Net Announcement   Philippe Trottet
• [Elecraft] Samelex Power Supplies with a K3   Phil & Debbie Salas
• [Elecraft] K3:DSP Upgrade well worth it   Philippe Trottet
• [Elecraft] Samelex Power Supplies with a K3   Steve Ellington
• [Elecraft] Samelex Power Supplies with a K3   Paul Christensen
• [Elecraft] Samelex Power Supplies with a K3   Steve Ellington
• [Elecraft] K3 keypad freq entry curiosity   John Watkins
• [Elecraft] Samelex Power Supplies with a K3   N1JM
• [Elecraft] Samelex Power Supplies with a K3   K4ia
• [Elecraft] Samelex Power Supplies with a K3   W0MU Mike Fatchett
• [Elecraft] Samelex Power Supplies with a K3   Alfred Frugoli
• [Elecraft] K3 keypad freq entry curiosity   ab2tc
• [Elecraft] Kenwood MC-60A   Larry Boekeloo
• [Elecraft] K3:DSP Upgrade well worth it   Tom W8JI
• [Elecraft] Samelex Power Supplies with a K3   Darrell Bellerive
• [Elecraft] K3:DSP Upgrade well worth it   Joe Planisky
• [Elecraft] Samelex Power Supplies with a K3   K4ia
• [Elecraft] Samelex Power Supplies with a K3   Jim Brown
• [Elecraft] Samelex Power Supplies with a K3   Phil Hystad
• [Elecraft] FT-5000 againts K3 ?   James Duffey
• [Elecraft] WTB K2 Option Bypass Headers kit   John Kenney
• [Elecraft] [K3] K3 fan noise, part XXLIV   Joe Planisky
• [Elecraft] Samelex Power Supplies with a K3   Dave Hachadorian
• [Elecraft] Samelex Power Supplies with a K3   WILLIS COOKE
• [Elecraft] Samelex Power Supplies with a K3   Phil & Debbie Salas
• [Elecraft] K3:DSP Upgrade well worth it   OE5CSP-Chris
• [Elecraft] [K3] Built in USB interface for K3   Joe Subich, W4TV
• [Elecraft] CONFIG   Richard Thorpe
• [Elecraft] switching power supplies   Gary Lee
• [Elecraft] [K3] K3 fan noise, part XXLIV   Dave Perry N4QS
• [Elecraft] CONFIG   Steve Robinson
• [Elecraft] Re-CONFIG   Richard Thorpe
• [Elecraft] K2 Build - #6950   steve d
• [Elecraft] K2 Build - #6950   Don Wilhelm
• [Elecraft] FT-5000 against K3 ?   Doug Turnbull
• [Elecraft] K3 Power Supply   Edwin Johnson
• [Elecraft] Samelex Power Supplies with a K3   Paul Christensen
• [Elecraft] switching power supplies   Darrell Bellerive
• [Elecraft] K3 Power Supply   Alan Bloom
• [Elecraft] K2 Build - #6950   Steve KC8QVO
• [Elecraft] K2/10 Cover & Dust Cover For Sale   Dave Agsten
• [Elecraft] [K3] Built in USB interface for K3   Brett Howard
• [Elecraft] Possible USB 2.0 mod   Brett Howard
• [Elecraft] K3:DSP Upgrade well worth it   Bill K9YEQ
• [Elecraft] Samlex 1223 & 1235 power supplies   abell
• [Elecraft] K2 RF Board resistance checks - not in spec   Steve KC8QVO
• [Elecraft] Samlex 1223 & 1235 power supplies   abell
• [Elecraft] [K3] K3 fan noise, part XXLIV   Andrew Moore
• [Elecraft] K2 RF Board resistance checks - not in spec   Don Wilhelm
• [Elecraft] Elecraft SSB net results (5-23-10)   Phillip Shepard
• [Elecraft] K2 Options By Pass Kit   John Kenney
• [Elecraft] Elecraft CW Net Report for May 23rd & 24th, 2010   Kevin Rock
• [Elecraft] Just curious about K3 relay switching clicks   Ramiro Aceves
• [Elecraft] Couple questions about K2   Alexey Kats
• [Elecraft] Samlex 1223 & 1235 power supplies   Bill Coleman
• [Elecraft] Couple questions about K2   Alexey Kats
• [Elecraft] Couple questions about K2   Don Wilhelm
• [Elecraft] Couple questions about K2   Don Wilhelm
• [Elecraft] Couple questions about K2   lstavenhagen
• [Elecraft] Couple questions about K2   Sverre Holm (LA3ZA)
• [Elecraft] Samelex Power Supplies with a K3   Jim Brown
• [Elecraft] Samlex 1223 & 1235 power supplies   Jim Brown
• [Elecraft] Samlex 1223 & 1235 power supplies   Paul Christensen
• [Elecraft] K3 possible option for the P3   Julius Fazekas n2wn
• [Elecraft] K3:DSP Upgrade well worth it   GW0ETF
• [Elecraft] K3 + softrock IF   Peter
• [Elecraft] K3 + softrock IF   Joe Subich, W4TV
• [Elecraft] K3 I750 hz tone   f9oj.7
• [Elecraft] K2 RF Board resistance checks - not in spec   Steve KC8QVO
• [Elecraft] K3:DSP Upgrade well worth it   Brendan Minish
• [Elecraft] EMU-0202 FS   Mike Short
• [Elecraft] K3 I750 hz tone   Geoffrey Downs
• [Elecraft] Found a K3 user in Central TX   Tony Lyon
• [Elecraft] Samlex 1223 & 1235 power supplies   Jim Brown
• [Elecraft] Samlex 1223 & 1235 power supplies   Vic K2VCO
• [Elecraft] E-MU 1212M internal sound card   Julius Fazekas n2wn
• [Elecraft] EMU-0202 FS SOLD   Mike Short
• [Elecraft] Couple questions about K2   Alexey Kats
• [Elecraft] Couple questions about K2   Alexey Kats
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] CW Mentor   Frank MacDonell
• [Elecraft] CW Mentor   WILLIS COOKE
• [Elecraft] K3 Sub-receiver use   Bill VanAlstyne W5WVO
• [Elecraft] K3 Sub-receiver use   Pete Smith
• [Elecraft] CW Mentor   Felipe Ceglia - PY1NB
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] RTTY   Robert 'RC' Conley
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] RTTY   Sam Morgan
• [Elecraft] RTTY-2   Robert 'RC' Conley
• [Elecraft] RTTY   Don Wilhelm
• [Elecraft] RTTY   Mike
• [Elecraft] K3 memory loss   Stewart
• [Elecraft] K3 memory loss   Lyle Johnson
• [Elecraft] K3 Firmware Rev. 3.97: Notch   Brian Alsop
• [Elecraft] K3 Sub-receiver use   Richard Ferch
• [Elecraft] K3 memory loss   Stewart
• [Elecraft] FT-5000 against K3 ?   pd0psb
• [Elecraft] K3 Firmware Rev. 3.97: Notch   Lyle Johnson
• [Elecraft] K3 Sub-receiver use   Lyle Johnson
• [Elecraft] K3 memory loss   Lyle Johnson
• [Elecraft] K3 Firmware Rev. 3.97: Notch   Edward Dickinson, III
• [Elecraft] K3 memory loss   drewko
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] kio2 aux i/o module   Rolf Jansson
• [Elecraft] koi2 module   Rolf Jansson
• [Elecraft] kio2 aux i/o module   Don Wilhelm
• [Elecraft] FS:Elecraft 2T-gen mini-module   Fred Atchley
• [Elecraft] K3 Sub-receiver use   Alan Bloom
• [Elecraft] Couple questions about K2   Bill Coleman
• [Elecraft] Couple questions about K2   Alexey Kats
• [Elecraft] K3 Sub-receiver use   Guy Olinger K2AV
• [Elecraft] K3 Sub-receiver use   Alan Bloom
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] K3 Sub-receiver use   Brett Howard
• [Elecraft] K3 memory loss   Brett Howard
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] P3 IF frequency   Ken Kopp
• [Elecraft] K3 memory loss   Stewart
• [Elecraft] K3 50 MHz power knob behaviour   Ramiro Aceves
• [Elecraft] P3 IF frequency   hb9ari
• [Elecraft] K3 50 MHz power knob behaviour   David Pratt
• [Elecraft] K3 50 MHz power knob behaviour   Alexandr Kobranov
• [Elecraft] K3 50 MHz power knob behaviour   David Quental
• [Elecraft] K3 50 MHz power knob behaviour   Alexandr Kobranov
• [Elecraft] K3 Sub-receiver use   Richard Ferch
• [Elecraft] K3 Sub-receiver use   Mike Harris
• [Elecraft] K3 - using rear panel PTT In jack   Pete Smith
• [Elecraft] K3 - using rear panel PTT In jack   Iain MacDonnell - N6ML
• [Elecraft] K3 Sub-receiver use   Alan Bloom
• [Elecraft] K3 Sub-receiver use   Radio Amateur N5GE
• [Elecraft] K3 Sub-receiver use   Alan Bloom
• [Elecraft] K3 Sub-receiver use   Guy Olinger K2AV
• [Elecraft] FM filter for AM   Ruben Navarro Huedo
• [Elecraft] FM filter for AM   Don Wilhelm
• [Elecraft] K3 Sub-receiver use   Edward R Cole
• [Elecraft] New K3 QRQ CW mode in the works   Steve Ellington
• [Elecraft] FM filter for AM   Joe Subich, W4TV
• [Elecraft] New K3 QRQ CW mode in the works   Wayne burdick
• [Elecraft] K3 Order Delays?   Jim Bennett / W6JHB
• [Elecraft] K3 - SR2O   Chris G3SJJ
• [Elecraft] K3 Order Delays?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Order Delays?   Jim Bennett / W6JHB
• [Elecraft] N2CQ QRP Contest Calendar: June 2010   Ken Newman
• [Elecraft] No CW sidetone on K2   R K Johnson
• [Elecraft] K3 - SR2O   Guy Olinger K2AV
• [Elecraft] New K3 QRQ CW mode in the works   DK4XL
• [Elecraft] No CW sidetone on K2   Don Wilhelm
• [Elecraft] K1 band pass filter alignment   ki4bbl at cox.net
• [Elecraft] K1 band pass filter alignment   David Herring, K6DCH
• [Elecraft] K1 band pass filter alignment   David Herring, K6DCH
• [Elecraft] K1 band pass filter alignment   ki4bbl at cox.net
• [Elecraft] K1 band pass filter alignment   Don Wilhelm
• [Elecraft] CW Sidetone   Toby Pennington
• [Elecraft] K1 band pass filter alignment   Alexey Kats
• [Elecraft] order of construction for k3   stephen pearce
• [Elecraft] K3 - "Quiet" fan part number   Ken Kopp
• [Elecraft] K1 band pass filter alignment   Don Wilhelm
• [Elecraft] CW Sidetone   Joe Subich, W4TV
• [Elecraft] order of construction for k3   Dick Dievendorff
• [Elecraft] K3? KXV3A RX Ant, IF Out & Xvrtr Int question using LP-PAN, w/ Rev. B RF board   dbp tds.net
• [Elecraft] order of construction for k3   Don Wilhelm
• [Elecraft] K1 band pass filter alignment   Alexey Kats
• [Elecraft] CW Sidetone   Toby Pennington
• [Elecraft] K1 band pass filter alignment   Don Wilhelm
• [Elecraft] K3? Asked and answered, already. Thanks.   dbp tds.net
• [Elecraft] CW Sidetone   Joe Subich, W4TV
• [Elecraft] order of construction for k3   Ken Kopp
• [Elecraft] K3? KXV3A RX Ant, IF Out & Xvrtr Int question using LP-PAN, w/ Rev. B RF board   Iain MacDonnell - N6ML
• [Elecraft] K3? KXV3A RX Ant, IF Out & Xvrtr Int question using LP-PAN, w/ Rev. B RF board   Alan Bloom
• [Elecraft] K1 band pass filter alignment   ki4bbl at cox.net
• [Elecraft] MH2 Microphone Issue   Jeff Cochrane - VK4BOF
• [Elecraft] MH2 Microphone Issue   David Herring, K6DCH
• [Elecraft] K2 Build - #6950   Steve KC8QVO
• [Elecraft] CW Sidetone   Arthur Nienhouse
• [Elecraft] K3 - SR2O   Art K6XT
• [Elecraft] MH2 Microphone Issue   paulb
• [Elecraft] MH2 Microphone Issue   Hector Padron
• [Elecraft] CW Sidetone   Tom W8JI
• [Elecraft] CW Sidetone   Steve Ellington
• [Elecraft] CW Sidetone   Toby Pennington
• [Elecraft] MH2 Microphone Issue   juergen
• [Elecraft] [K2] control board question   John Fritze
• [Elecraft] MH2 Microphone Issue   juergen
• [Elecraft] K2 Build - #6950   Mark - W5EZY
• [Elecraft] [K2] control board question   Alan D. Wilcox
• [Elecraft] MH2 Microphone Issue   Mike
• [Elecraft] MH2 Microphone Issue   Joe Subich, W4TV
• [Elecraft] CW Sidetone   Tom W8JI
• [Elecraft] K3 - SR2O   Iain MacDonnell - N6ML
• [Elecraft] MH2 For Sale   Ron Gould
• [Elecraft] MH2 Microphone Issue   Mike
• [Elecraft] K3 144 MHz module - how to make it work?   Gil WA5YKK
• [Elecraft] K3 144 MHz module - how to make it work?   Lyle Johnson
• [Elecraft] K3 144 MHz module - how to make it work?   Grant Youngman
• [Elecraft] K3 - SR2O   Chris G3SJJ
• [Elecraft] MH2 Microphone Issue   Stephen Prior
• [Elecraft] MH2 Microphone   Ron Gould
• [Elecraft] [K3] K3NA on 5 pole vs 8 pole filters   Alfred Frugoli
• [Elecraft] KPA100 problem   Luca Valer
• [Elecraft] [K3] K3 fan noise, part XXLIV   Joe Planisky
• [Elecraft] K3 mods and updates   Dan Atchison
• [Elecraft] K1 build alignment.   Dominic Baines
• [Elecraft] KPA100 problem   Don Wilhelm
• [Elecraft] K1 build alignment.   Don Wilhelm
• [Elecraft] K3 mods and updates   lstavenhagen
• [Elecraft] [K3] K3NA on 5 pole vs 8 pole filters   Bill W4ZV
• [Elecraft] K3 144 MHz module - how to make it work?   Don Cunningham
• [Elecraft] K2 Build - #6950   Bill K9YEQ
• [Elecraft] New K3 app note issued.   Bruce Beford
• [Elecraft] New K3 app note issued.   Bruce Beford
• [Elecraft] New K3 app note issued.   Phil Hystad
• [Elecraft] New K3 app note issued.   Don Cunningham
• [Elecraft] [K3] K3 fan noise, part XXLIV   Peter Wollan
• [Elecraft] New K3 app note issued.   Bill W4ZV
• [Elecraft] Nice KXV3 feature   Jim Miller
• [Elecraft] KSYN3 mods to date   Paul Kirley
• [Elecraft] KSYN3 mods to date, corrected third mod applicability   Paul Kirley
• [Elecraft] K1 build alignment.   Dominic Baines
• [Elecraft] [K3] K3 fan noise, part XXLIV   Brett Howard
• [Elecraft] [K3] K3 fan noise, part XXLIV   Julian, G4ILO
• [Elecraft] K1 build alignment.   Dominic Baines
• [Elecraft] KSYN3 mods to date, corrected third mod applicability   Bill W4ZV
• [Elecraft] K3 50 MHz power knob behaviour   Ramiro Aceves
• [Elecraft] K3 50 MHz power knob behaviour   Ramiro Aceves
• [Elecraft] K3 50 MHz power knob behaviour   Ramiro Aceves
• [Elecraft] K3 50 MHz power knob behaviour   Ramiro Aceves
• [Elecraft] K3 Which headphones for stereo cw work?   Sam Morgan
• [Elecraft] K3 Which headphones for stereo cw work?   Bob Naumann
• [Elecraft] K3 Which headphones for stereo cw work?   Geoffrey Downs
• [Elecraft] K3 Which headphones for stereo cw work?   Don Wilhelm
• [Elecraft] K3 Which headphones for stereo cw work?   Tom W8JI
• [Elecraft] K3 Which headphones for stereo cw work?   Sam Morgan
• [Elecraft] K3 Which headphones for stereo cw work?   Hector Padron
• [Elecraft] K3 Which headphones for stereo cw work?   Lee J. Imber (WW2DX)
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   PHIL
• [Elecraft] K3 Headphones   Doug Turnbull
• [Elecraft] K3 Was - Which headphones for stereo cw work? Now - Audio Spread Spectrum   Jim Campbell
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   Phil & Debbie Salas
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   Howard K2HK
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   Joe Subich, W4TV
• [Elecraft] K3 Headphones   Art K6XT
• [Elecraft] K3 Which headphones for stereo cw work?   Jim Brown
• [Elecraft] [K3] K3NA on 5 pole vs 8 pole filters   Dick Green WC1M
• [Elecraft] [K3] K3NA on 5 pole vs 8 pole filters   Ed Muns
• [Elecraft] W1: Can you remote the readout lightbars?   Jim Robbins
• [Elecraft] [K3] K3NA on 5 pole vs 8 pole filters   Bill W4ZV
• [Elecraft] W1: Can you remote the readout lightbars?   L. D. Ingram
• [Elecraft] [K3] K3NA on 5 pole vs 8 pole filters   Ed Muns
• [Elecraft] Using a second K3 as a receiver for diversity   Michael Dillon
• [Elecraft] Using a second K3 for Diversity Receive   Michael Dillon
• [Elecraft] Using a second K3 for Diversity Receive   Lyle Johnson
• [Elecraft] K3 Which headphones for stereo cw work?   Bill W4ZV
• [Elecraft] K3 Which headphones for stereo cw work?   Bill W4ZV
• [Elecraft] K3 Was - Which headphones for stereo cw work? Now - Audio Spread Spectrum   drewko
• [Elecraft] Using a second K3 as a receiver for diversity   Tom W8JI
• [Elecraft] K3 Was - Which headphones for stereo cw work? Now - Audio Spread Spectrum   Steve Ellington
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   PHIL
• [Elecraft] SeaPac and HamCom Hamfests booth help   Lisa Jones - Elecraft Sales
• [Elecraft] Firmware load issue   Clint
• [Elecraft] K3 Was - Which headphones for stereo cw work? Now - Audio Spread Spectrum   drewko
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   Dave Anderson, K4SV
• [Elecraft] K3 Which headphones for stereo cw work?   Joe Subich, W4TV
• [Elecraft] Photos of K2 in office ...   Alan D. Wilcox
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   W6NEK
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   Joe Subich, W4TV
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   Joe Subich, W4TV
• [Elecraft] K3 Headphones   ka9zap
• [Elecraft] Problem KPA100 [SOLVED]   Luca Valer
• [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5   Bill K9YEQ
• [Elecraft] K3 Which headphones for stereo cw work?   Sam Morgan
• [Elecraft] K3 VFO encoder temperature sensitive?   Stan Gibbs
• [Elecraft] elecraft/thp 2.5   PHIL
• [Elecraft] K3 VFO encoder temperature sensitive?   Bill W4ZV
• [Elecraft] K3 VFO encoder temperature sensitive?   Stan Gibbs
• [Elecraft] K3 VFO encoder temperature sensitive?   Stan Gibbs
• [Elecraft] K3 Which headphones for stereo cw work?   Brett Howard
• [Elecraft] [K3] K3 fan noise, part XXLIV   Stephen Prior
• [Elecraft] UK SSB Net   Ian Maude
• [Elecraft] [K3] K3 fan noise, part XXLIV   Tom W8JI
• [Elecraft] K3 Was - Which headphones for stereo cw work? Now - Audio Spread Spectrum   Sam Morgan
• [Elecraft] [K3] K3 fan noise, part XXLIV   David M. Elliott
• [Elecraft] Firmware load issue   Rich - K1HTV
• [Elecraft] k2 T7 query   VicWinton
• [Elecraft] k2 T7 query   Don Wilhelm
• [Elecraft] RFI PC Speaker Hum   Brian - N5BCN
• [Elecraft] [K3] K3 fan noise, part XXLIV   Joe Planisky
• [Elecraft] [K3] K3 fan noise, part XXLIV   Tom W8JI
• [Elecraft] RFI PC Speaker Hum   Ken Kopp
• [Elecraft] RFI PC Speaker Hum   Phil LaMarche
• [Elecraft] RFI PC Speaker Hum   Joe Subich, W4TV
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] K3 and Toyko HY-Power   Richard Haendel
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Sam Morgan
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Don Wilhelm
• [Elecraft] [K3] K3 fan noise, part XXLIV   Ross Primrose N4RP
• [Elecraft] [K3] K3 fan noise, part XXLIV   Lyle Johnson
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Lyle Johnson
• [Elecraft] K3/ERR IF 1   Jacek Marczewski
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Brett Howard
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Brett Howard
• [Elecraft] K3 ATU   Barry Simpson
• [Elecraft] Antenna Switching with KRC2 Six Mtr   John K9UWA
• [Elecraft] K3 ATU   Brett Howard
• [Elecraft] K2/100 Distortion on 80M   Barry Middleton
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Bill W4ZV
• [Elecraft] [K3] K3 fan noise, part XXLIV   Mike
• [Elecraft] [K3] K3 fan noise, part XXLIV   Philippe Trottet
• [Elecraft] K2/100 Distortion on 80M   Don Wilhelm
• [Elecraft] K3 Which headphones for stereo cw work? Summation   David Cutter
• [Elecraft] [K3] K3 fan noise, part XXLIV   Roy Morris
• [Elecraft] [K3] K3 fan noise, part XXLIV   Joe Planisky
• [Elecraft] [K3] K3 fan noise, part XXLIV   Steve Ellington
• [Elecraft] [K3] K3 fan noise, part XXLIV   Tim Heasman
• [Elecraft] aux Y cable that really have 15 wires   elecraft at g4fre.com
• [Elecraft] aux Y cable that really have 15 wires   Randy Farmer
• [Elecraft] Antenna Switching with KRC2 Six Mtr   Jack Brindle
• [Elecraft] aux Y cable that really have 15 wires   Joe Subich, W4TV
• [Elecraft] K3 Cable   Phil LaMarche
• [Elecraft] [K3] K3 fan noise, part XXLIV   N1JM
• [Elecraft] [K3] K3 fan noise, part XXLIV   Dave Hachadorian
• [Elecraft] RFI PC Speaker Hum   Brian - N5BCN
• [Elecraft] K2 #6950 - Alignment 2, VCO and BFO issues   Steve KC8QVO
• [Elecraft] [K3] K3 fan noise, part XXLIV   Guy Olinger K2AV
• [Elecraft] RFI PC Speaker Hum   Sverre Holm (LA3ZA)
• [Elecraft] Buryflex all the way to K3?   Jim Miller
• [Elecraft] RFI PC Speaker Hum   Edward R Cole
• [Elecraft] K3, DSP Upgrade   Gene
• [Elecraft] Buryflex all the way to K3?   Tom W8JI
• [Elecraft] BFO-Problem   "Benjamin Krüger"
• [Elecraft] Buryflex all the way to K3?   Jim Miller
• [Elecraft] SO2V with the K3   Jorge Diez - CX6VM
• [Elecraft] K3 dsp rev D hiss audio   Juha - oh6os
• [Elecraft] Buryflex all the way to K3?   Bill VanAlstyne W5WVO
• [Elecraft] SO2V with the K3   Iain MacDonnell - N6ML
• [Elecraft] K3 dsp rev D hiss audio   Steve Ellington
• [Elecraft] [K3] K3NA on 5 pole vs 8 pole filters   Eric Scace K3NA
• [Elecraft] K3 and Yaesu MD-1C8 Microphone   Deane Walkington
• [Elecraft] K3 and Yaesu MD-1C8 Microphone   W4CCS
• [Elecraft] Elecraft CW Net Report for May 30th & 31st, 2010   Kevin Rock
• [Elecraft] K2 VFO problems   Dan Grizzard
• [Elecraft] Elecraft SSB net results (5-30-10)   Phillip Shepard
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] [K3] K3 fan noise, part XXLIV   Philippe Trottet
• [Elecraft] K3/transverters/driving amps   Dick Hanson
• [Elecraft] K3 Firmware V3.99   JohnK1JD
• [Elecraft] Question about K2 mod for optimizing it for 5W CW   Alexey Kats
• [Elecraft] Question about K2 mod for optimizing it for 5W CW   Alexey Kats
• [Elecraft] Question about K2 mod for optimizing it for 5W CW   Don Wilhelm
• [Elecraft] Acknowledgement   Ed Lambert
• [Elecraft] Question about K2 mod for optimizing it for 5W CW   Alexey Kats
• [Elecraft] Question about K2 mod for optimizing it for 5W CW   Don Wilhelm
• [Elecraft] One more question about CW operation   Alexey Kats
• [Elecraft] Question about K2 mod for optimizing it for 5W CW   Alexey Kats
• [Elecraft] One more question about CW operation   Steve Ellington
• [Elecraft] One more question about CW operation   Guy Olinger K2AV
• [Elecraft] One more question about CW operation   Bill VanAlstyne W5WVO
• [Elecraft] K1 OT lead acid battery charging   ki4bbl at cox.net
• [Elecraft] One more question about CW operation   Bob Cunnings
• [Elecraft] K3 Sub-receiver use   Guy Olinger K2AV
• [Elecraft] One more question about CW operation   ki4bbl at cox.net
• [Elecraft] K3 Sub-receiver use   Tom W8JI
• [Elecraft] K1 OT lead acid battery charging   Tom W8JI
• [Elecraft] K1 OT lead acid battery charging   Wes Stewart
• [Elecraft] One more question about CW operation   L. D. Ingram
• [Elecraft] Question about K2 mod for optimizing it for 5W CW   Vic K2VCO
• [Elecraft] K3 Firmware V3.99 (?)   Fred Atchley
• [Elecraft] One more question about CW operation   Radio Amateur N5GE
• [Elecraft] One more question about CW operation   Radio Amateur N5GE
• [Elecraft] K2 - Why no enameled wire for T4?   Ross Primrose N4RP
• [Elecraft] One more question about CW operation   Bill Coleman
• [Elecraft] [P3] : Eric at the German Hamfest   Raymond METZGER
• [Elecraft] K3 Firmware V3.99   Barry N1EU
• [Elecraft] K3 Sub-receiver use   Guy Olinger K2AV
• [Elecraft] One more question about CW operation   WILLIS COOKE
• [Elecraft] One more question about CW operation   Ken Kopp
• [Elecraft] One more question about CW operation   Edward R Cole
• [Elecraft] K3 Firmware V3.99 (?)   Guy Olinger K2AV
• [Elecraft] K2 - Why no enameled wire for T4?   Don Wilhelm
• [Elecraft] K3 Sub-receiver use   hb9ari
• [Elecraft] K3 Firmware V3.99   Alexandr Kobranov
• [Elecraft] [P3] : Eric at the German Hamfest   Doug Turnbull
• [Elecraft] K2 goes wild on 40m - - need advice   vidi
• [Elecraft] K3 Sub-receiver use   Alan Bloom
• [Elecraft] Odd error code... "DVR" ?!   Gil WA5YKK
• [Elecraft] Odd error code... "DVR" ?!   Radio Amateur N5GE
• [Elecraft] K3 Firmware V3.99   John, KD8K
• [Elecraft] K3 Firmware V3.99   Steve Ellington
• [Elecraft] K3 Firmware V3.99   David Quental
• [Elecraft] K3 Firmware V3.99   Guy Olinger K2AV
• [Elecraft] K3 Firmware V3.99   Guy Olinger K2AV
• [Elecraft] Odd error code... "DVR" ?!   Guy Olinger K2AV
• [Elecraft] One more question about CW operation   Alexey Kats
• [Elecraft] K3 Firmware V3.99   Radio Amateur N5GE
• [Elecraft] K2 - Why no enameled wire for T4?   Jim Brown
• [Elecraft] Buryflex all the way to K3?   Jim Brown
• [Elecraft] Buryflex all the way to K3?   Jim Brown
• [Elecraft] K2 goes wild on 40m - - need advice   Don Wilhelm
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Jim Brown
• [Elecraft] RFI PC Speaker Hum   Jim Brown
• [Elecraft] RE your K1 for sale   watchesandclocks at rogers.com
• [Elecraft] K3 Sub-receiver use   Joe Subich, W4TV
• [Elecraft] Fw: Buryflex all the way to K3?   Ken Kopp
• [Elecraft] Buryflex all the way to K3?   Tom W8JI
• [Elecraft] Buryflex all the way to K3?   Jim Miller
• [Elecraft] Buryflex all the way to K3?   Jim Brown
• [Elecraft] K3 Assembly / Static Dissipation   Jim Bennett / W6JHB
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Bill W4ZV
• [Elecraft] Cox Connectors (was: Buryflex all the way to K3?)   Lyle Johnson
• [Elecraft] One more question about CW operation   Paul at N4LCD.com
• [Elecraft] K3 MH2 Mic Problem   Deane Walkington
• [Elecraft] Buryflex all the way to K3?   Tom W8JI
• [Elecraft] K3 MH2 Mic Problem   Jeff Cochrane - VK4BOF
• [Elecraft] K3 Assembly / Static Dissipation   Don Wilhelm
• [Elecraft] K3 Assembly / Static Dissipation   Jim / W6JHB
• [Elecraft] K3 MH2 Mic Problem   Don Wilhelm
• [Elecraft] Bartg Sprint 75   Claude Du Berger
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Don Wilhelm
• [Elecraft] Revision 3.97; is it still Beta?   W0WOI at aol.com
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Bill K9YEQ
• [Elecraft] Bartg Sprint 75   Lyle Johnson
• [Elecraft] K3 Which headphones for stereo cw work? Summation   Bill Tippett
• [Elecraft] Revision 3.97; is it still Beta?   Don Wilhelm
• [Elecraft] Alpha Software   Richard Thorpe
• [Elecraft] Alpha Software   Lyle Johnson
• [Elecraft] Alpha Software   Don Wilhelm
• [Elecraft] FS: Elecraft BL2 balun   Randy Cook
• [Elecraft] Bartg Sprint 75   Joe Subich, W4TV

Last message date: Mon May 31 23:09:47 EDT 2010
Archived on: Mon May 31 23:12:26 EDT 2010

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...