[Elecraft] A few thoughts on the K3 as an AM SWBC receiver

[David Cutter]

Shame, that would allow individual values to be set up for each bc band of 
interest, along with mode, band, bwidth, filters, etc.

David
G3UNA

----- Original Message ----- 
From: "drewko" <drewko1 at verizon.net>
To: "David Cutter" <d.cutter at ntlworld.com>
Cc: <Elecraft at mailman.qth.net>
Sent: Sunday, May 09, 2010 1:29 PM
Subject: Re: [Elecraft] A few thoughts on the K3 as an AM SWBC receiver


>I think you can change KAT3 from "Auto" to "LCSet" via macro but you
> can't actually adjust the L/C values. But since the L/C settings are
> not retained when switching back and forth to Auto there isn't much
> point to the macro.
>
> 73,
> Drew
> AF2Z
>
>
> On Thu, 06 May 2010 06:58:50 +0100, David G3UNA wrote:
>
>>Sorry if I missed it, but, can a manual setting be set by a macro?
>>
>>David
>>G3UNA
>>
>>
>>>
>>> It would be nice if the K3 could remember the ATU mode (auto or
>>> manual) per each tuning segment instead of just having it apply to the
>>> entire swath of band. Then the SWBC segments would remember their
>>> manual settings while the ham portions could remain in auto tune.
>>>
>>> 73,
>>> Drew
>>> AF2Z
>