[Elecraft] order of construction for k3

[Dick Dievendorff]

The KXV3 is a back panel install, I'd do that first.

You'll need to remove the front panel board to install the 2nd receiver Aux
DSP board and the KDVR3.
Install both the Aux DSP board from the 2nd receiver and the KDVR3 board
while the front panel is open.  You can reinstall the front panel and not
enable the 2nd receiver (leave the KRX3 menu option disabled for a bit).
You can enable and test the KDVR3.

Then install the sub receiver RF board (the l-shaped one in the steel can)
last, and then enable the KRX3 menu option.

YMMV, but that's how I'd do it.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of stephen pearce
Sent: Wednesday, May 26, 2010 5:51 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] order of construction for k3

Hi
I have the 2nd rx, dvr and xv3 ready to install preparatory for the
arrival of the p3.
I want to install all 3 in one go.
The manuals are written as if you were starting from scratch each time.
Could someone (maybe who has already done this) give me some advise of
the sequence of approach
given that I want to do all 3 installations in one go
Mni Tnx
73
de zl1any


-- 
Stephen Pearce
Critical Care
Whangarei
ph 021 390 997
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html