[Elecraft] K3 Firmware V3.99

[Steve Ellington]

I must agree. It's really awesome QSK and for some strange reason I find 
that I can send faster and with less errors with the internal keyer. The 
sidetone seems more articulate or maybe the response to the paddle commands 
are faster...Whatever...I like it. RIT will be nice to have back.

Steve
N4LQ
----- Original Message ----- 
From: "John, KD8K" <john at kd8k.com>
Cc: <elecraft at mailman.qth.net>
Sent: Monday, May 31, 2010 4:38 PM
Subject: Re: [Elecraft] K3 Firmware V3.99


>I have the same thing occurring here with 3.99. When working split, as
> soon as I transmit, sub RX reception quits. (just a slight noise in
> background on the sub rx, like a receiver that has no antenna
> connected). This was on CW. Both the sub and the main receiver was set
> to the same mode (CW). It occurs with QRQ on or off. This was on 20m.
> 500hz filters selected on both receivers. So far, it occurs every time.
> Turning off and on the sub receiver re enables reception on the sub rx.
>
> By the way, I really like the new QSK+ mode. It may be the best QSK I
> have heard on any rig. Thanks!
>
> 73, John KD8K
>
>> I'm unable to replicate this glitch with v3.99 on my K3.  If anybody else
>> notices something similar, please post to the list with particulars on
>> configuration.
>>
>> 73,
>> Barry N1EU
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html