[Elecraft] K3 - 60 Meters

[Don Wilhelm]

Dick,

No need for a firmware change - the K3 can tune anywhere within the 60 
meter band.
You may have set up "Channel Hopping" on 60 meters for your K3 - see 
page 40 in the manual.
Just change the frequency for the Channel Hopping memory that you used 
in your K3.

73,
Don W3FPR

Edward Dickinson, III wrote:
> It seems one of the frequencies on 60 Meters may be changing.  Can that be
> handled via a typical firmware update?
>
>