[Elecraft] K3 I750 hz tone

[Geoffrey Downs]

Jacques, it's in the notes for firmware 3.84 :-



"* SQUELCH-CONTROLLED 1750-HZ PL TONE: Some EU

repeaters require a 1750-Hz PL tone burst to open. Previously, an

0.5-second burst was generated at the start of each transmission.

Now, this tone is only generated if squelch is not already open.

The squelch-controlled PL tone feature can be turned off by

setting the PITCH parameter to PL OFF. With either the PL TONE

or PL OFF setting, the operator can still do manual PL tone

burst as described in the next item.



* MANUALLY CONTROLLED 1750-HZ PL TONE:

The operator can now generate a variable-length tone burst

at any time while transmitting by holding PITCH switch."



73 to all



Geoff

G3UCK


----- Original Message ----- 
From: "f9oj.7" <f9oj.7 at wanadoo.fr>
To: "Elecraft" <elecraft at mailman.qth.net>
Sent: Monday, May 24, 2010 8:58 PM
Subject: [Elecraft] K3 I750 hz tone


> Hello
> Perhaps I'll look stupid (once more !), but I can't find how to switch a 2 
> m
> repeater on with the 1750 hz tone.
> I have the minus 600 khz OK, the 1750 hz tone ( which is the standard in
> France) is set normally, but I couldn't find, in the owner's manual or
> manually, the right way to open the blessed repeater !
> If someone knows the trick, let me know ...
> Thanks in advance
> 73
> Jacques de F9OJ
> K3 # 2450
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>