[Elecraft] KX1 Build Part 1 Test Errors

[Mike M]

Hello -

I just finished part 1 of building my KX1.  When I made the resistance  
checks on page 26 I had three failures on the checks on U1.

Pin 19 was supposed to be less than 5 ohms, but registered 5M.  Pin 23  
and 24 were supposed to be greater than 10k, but pin 23 read 3k, and  
pin 24 was .2 ohms.

I resoldered the joints on these pins and rechecked, with no  
improvement.

The checks for U3 and the diodes were good.

Any idea what I did wrong?

Thanks.

73,
Mike, KL7MJ