[Elecraft] K2 audio out

[Don Wilhelm]

Dan,
Check the wiring at the external speaker jack carefully.  If you mixed 
up the ground and hot wires at that point, low or no speaker output is 
the result.

To make a quick check to determine if that is the problem, remove the 
top cover from the K2 (leaving the speaker connected) - if the speaker 
volume is OK then but decreases when you mount the top cover, you have 
the ext spkr jack wired incorrectly and are grounding the speaker output.

73,
Don W3FPR

Dan Grizzard wrote:
> Hello all,
> I have recently completed my K2 alignment and finished assembling the top cover and installing it.
> I find I have very low audio from my speaker and must be within a foot or so to hear it. Both the front and rear
> speaker jacks have plenty volume using earphones. Any suggestions?
> 73
>
>