[Elecraft] CW/CW-REV config option

[Guy Olinger K2AV]

Or is it a matter of asking the manufacturer/programmer which has a
reputation of responsiveness?

To be fair to others, particularly the many utility programmers,  I
have had very good luck with a request for a program option.  I HAVE
managed to get various things added.  Particularly when I started out
with "this is one of my favorite programs."  which was true since I
wouldn't bother to request a change unless I used it a lot.

Someone else got MM logger to add the use rev CW switch when the K3
became a major player.  K3 IS now a major player...go ask your
programmers to add "use rev cw"?  See what they say.

73, Guy.

On Sat, May 1, 2010 at 10:32 AM, Joe Subich, W4TV <lists at subich.com> wrote:
>
> On 5/1/2010 10:12 AM, Rich - K1HTV wrote:
>  > Some programs have a 'CW-REV' mode switch command available, but
>  > many don't.  I chose to use three pieces of radio controlling
>  > software which suit my operational needs, two of which simply send
>  > a 'CW' command.
>
> The issue should not be one of the K3 changing its interface to suit
> software.  The authors of the software should update their software
> to support the hardware - just as they have done over the years to
> support other new hardware.
>
> The K3 is not the only transceiver that defaults to "LSB" CW reception.
>
> Again, this is yet another case of "gotta make the K3 act just like
> my YaeComWood."  If you want a Kenwood, buy a Kenwood.
>
> 73,
>
>    ... Joe, W4TV
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>