[Elecraft] [K2] control board question

[John Fritze]

I started build one of the 2 K2s I ordered at Dayton (one for me and
the second for Linda K2QYL).  After about 5 hours I have the control
board done.  I did the resistence measurments as specified and all are
OK, except for U6 pins 29 &30, the DIT and DAH pins.  The manual
specifys between 70-90K ohms, I have 95K on both.  I'm guessing that
is OK.  Or do I need to look for something fairly minor?

John
K2QY