[Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5

[Phil & Debbie Salas]

The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the 15-pin 
HD D-connector.  Nothing special needs to be done, other than finding the 
pin outs from the manuals.  The THP 2.5 even has pull-up resistors so early 
K3 radios will drive the band data input just fine (NOT the case with the 
THP 1.5, where you need the K3 pull-up mod).  If you plan on using ALC, you 
do need the K3 negative-going ALC mod if you have an early K3.

Phil - AD5X