[Elecraft] [K3] K3 fan noise, part XXLIV

Brett Howard brett at livecomputers.com
Fri May 28 04:01:07 EDT 2010


Well go ahead and put me down for having the UTEC fans in SN#1116.

I'd say that the fans are perfectly reasonable yet they are clearly
audible when they are running.  When they step up into high gear they
are very clearly heard and this is in a room full of computers with
several fans in each one.

~Brett (N7MG)  (Previously KC7OTG)

On Thu, May 27, 2010 at 11:28 AM, Joe Planisky <jplan at jeffnet.org> wrote:
> Since the responses to my inquiry about K3 fan brands/models have
> virtually stopped, I thought I'd post the results.  There are indeed
> at least 2 different fans in use in K3s:
>
> Elina HDF6015L-12LB-1 and UTEC AT6015L-12L2B-ND2 and ND5
>
> The Elina fans are made by Inaba Denki Sangyo, a Japanese company.
> You can find specs for this fan at http://www.europeanthermodynamics.com/Fans&Blowers/elina%20fan_eng.pdf
>
> The UTEC fans are made by United Thermal Engineering Corp. Their
> office is in San Jose, CA. but their factories are in Japan, Taiwan,
> and China. http://www.utecusa.com/products/pdffiles/pid_1-45-152_%28SPEC%29AT6015L-12L2B%20ND1%2812-22-08%29.pdf
>
> According to the published specs, the UTEC fans have a slightly higher
> rated speed (3000 rpm vs 2800 rpm), more airflow (15.4 cfm vs 10.6
> cfm), higher static pressure (2.21mm vs 1.5mm),and higher noise (24.8
> dBA vs 21 dBA) than the Elina fans.  They also operate over a wider
> range of voltages than the Elina fans (6-13.8v vs 10.2-13.8v).  Both
> use ball bearings.  Based just on the specs, I would expect the UTEC
> fans to be slightly more powerful and slightly louder.
>
>  From the responses I received, it looks like the Elina fans were used
> on earlier K3s with serial numbers < 900 or so.
>
> I received responses from 13 people (including myself), covering 13
> K3s.  If the reporter used words or phrases like "quiet", "silent",
> "never hear them", I counted their response as "quiet".  If they used
> words or phrases like "loud", "annoying", "I can hear them", I counted
> their response as "loud"
>
> UTEC Quiet   3
> UTEC Loud:   4
> Elina Quiet: 6
> Elina Loud:  0
>
> With such a small sample of self-reported anecdotes of a subjective
> perception, the results of this little survey are statistically
> virtually meaningless.  However, they do suggest a direction for
> further research in that no one reported loud Elina fans.
>
> I may have a chance to do some side-by-side comparisons between my K3
> and an earlier SN K3 in a few weeks.  If that turns up anything
> interesting, I'll report it here.
>
> Thanks to everyone who took the time and effort to respond to my
> request.
>
> 73
> --
> Joe KB8AP
>
>
> On May 23, 2010, at 9:19 AM, Joe Planisky wrote:
>
>> The topic of K3 fan noise seems to come up every now and then, and
>> each time it does there's a chorus of people who say the fans in their
>> K3 are absolutely silent, and an equal chorus of people who say the
>> fans are clearly audible.
>>
>> ...
>
>> However, I'm also wondering if Elecraft has changed brands or models
>> of fans from time to time.  It's possible that some brands/models
>> might be quieter than others.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


More information about the Elecraft mailing list